[PATCH v2 16/19] powerpc: fsl_pci, swiotlb: Move controller ops from ppc_md to controller_ops

Daniel Axtens dja at axtens.net
Tue Mar 31 16:00:54 AEDT 2015


Moves the setup out of swiotlb's subsys init call, and into an new
structure.

fsl_pci.c is the only thing that checks the ppc_swiotlb_enable global,
so we can be confident that patching it will cover all the PCI
implementations affected by the changes to dma-swiotlb.c.

We do have to make sure we do the changes late in the function, after
setup_pci_atmu, because that can change ppc_swiotlb_enable.

Signed-off-by: Daniel Axtens <dja at axtens.net>

---

v1 --> v2:
 - Move the setup call to after setup_pci_atmu().
---
 arch/powerpc/kernel/dma-swiotlb.c | 11 ++++-------
 arch/powerpc/sysdev/fsl_pci.c     | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 7359797..6e8d764 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -116,16 +116,13 @@ void __init swiotlb_detect_4g(void)
 	}
 }
 
-static int __init swiotlb_late_init(void)
+static int __init check_swiotlb_enabled(void)
 {
-	if (ppc_swiotlb_enable) {
+	if (ppc_swiotlb_enable)
 		swiotlb_print_info();
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	} else {
+	else
 		swiotlb_free();
-	}
 
 	return 0;
 }
-subsys_initcall(swiotlb_late_init);
+subsys_initcall(check_swiotlb_enabled);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4b74c27..b124e17 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -111,6 +111,22 @@ static struct pci_ops fsl_indirect_pcie_ops =
 #define MAX_PHYS_ADDR_BITS	40
 static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
 
+#ifdef CONFIG_SWIOTLB
+static struct pci_controller_ops swiotlb_pci_controller_ops = {
+	.dma_dev_setup = pci_dma_dev_setup_swiotlb,
+};
+
+static void setup_swiotlb_ops(struct pci_controller *hose)
+{
+	if (ppc_swiotlb_enable) {
+		hose->controller_ops = swiotlb_pci_controller_ops;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+	}
+}
+#else
+static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
+#endif
+
 static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
@@ -548,6 +564,9 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose);
 
+	/* Set up controller operations */
+	setup_swiotlb_ops(hose);
+
 	return 0;
 
 no_bridge:
-- 
2.1.4



More information about the Linuxppc-dev mailing list