[PATCH v3 1/3] powerpc/powernv: Use PCI slot reset infrastructure
Gavin Shan
gwshan at linux.vnet.ibm.com
Tue Mar 24 11:39:40 AEDT 2015
For PowerNV platform, running on top of skiboot, all PE level reset
should be routed to firmware if the bridge of the PE primary bus has
device-node property "ibm,reset-by-firmware". Otherwise, the kernel
has to issue hot reset on PE's primary bus despite the requested reset
types, which is the behaviour before the firmware supports PCI slot
reset. So the changes don't depend on the PCI slot reset capability
exposed from the firmware.
Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
arch/powerpc/include/asm/eeh.h | 1 +
arch/powerpc/include/asm/opal.h | 4 +-
arch/powerpc/platforms/powernv/eeh-powernv.c | 206 +++++++++++++--------------
3 files changed, 102 insertions(+), 109 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 61912fc..d777c0c 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -192,6 +192,7 @@ enum {
#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
#define EEH_RESET_HOT 1 /* Hot reset */
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
+#define EEH_RESET_COMPLETE 4 /* PHB complete reset */
#define EEH_LOG_TEMP 1 /* EEH temporary error log */
#define EEH_LOG_PERM 2 /* EEH permanent error log */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9ee0a30..faa4bc6 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -867,7 +867,7 @@ int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t
int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
uint16_t dma_window_number, uint64_t pci_start_addr,
uint64_t pci_mem_size);
-int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+int64_t opal_pci_reset(uint64_t id, uint8_t reset_scope, uint8_t assert_state);
int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer,
uint64_t diag_buffer_len);
@@ -883,7 +883,7 @@ int64_t opal_get_epow_status(__be64 *status);
int64_t opal_set_system_attention_led(uint8_t led_action);
int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
__be16 *pci_error_type, __be16 *severity);
-int64_t opal_pci_poll(uint64_t phb_id);
+int64_t opal_pci_poll(uint64_t id, uint8_t *val);
int64_t opal_return_cpu(void);
int64_t opal_check_token(uint64_t token);
int64_t opal_reinit_cpus(uint64_t flags);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index ce738ab..79208cd 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -742,12 +742,12 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
return ret;
}
-static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+static s64 pnv_eeh_poll(uint64_t id)
{
s64 rc = OPAL_HARDWARE;
while (1) {
- rc = opal_pci_poll(phb->opal_id);
+ rc = opal_pci_poll(id, NULL);
if (rc <= 0)
break;
@@ -763,84 +763,38 @@ static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
{
struct pnv_phb *phb = hose->private_data;
+ uint8_t scope;
s64 rc = OPAL_HARDWARE;
pr_debug("%s: Reset PHB#%x, option=%d\n",
__func__, hose->global_number, option);
-
- /* Issue PHB complete reset request */
- if (option == EEH_RESET_FUNDAMENTAL ||
- option == EEH_RESET_HOT)
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PHB_COMPLETE,
- OPAL_ASSERT_RESET);
- else if (option == EEH_RESET_DEACTIVATE)
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PHB_COMPLETE,
- OPAL_DEASSERT_RESET);
- if (rc < 0)
- goto out;
-
- /*
- * Poll state of the PHB until the request is done
- * successfully. The PHB reset is usually PHB complete
- * reset followed by hot reset on root bus. So we also
- * need the PCI bus settlement delay.
- */
- rc = pnv_eeh_phb_poll(phb);
- if (option == EEH_RESET_DEACTIVATE) {
- if (system_state < SYSTEM_RUNNING)
- udelay(1000 * EEH_PE_RST_SETTLE_TIME);
- else
- msleep(EEH_PE_RST_SETTLE_TIME);
+ switch (option) {
+ case EEH_RESET_HOT:
+ scope = OPAL_RESET_PCI_HOT;
+ break;
+ case EEH_RESET_FUNDAMENTAL:
+ scope = OPAL_RESET_PCI_FUNDAMENTAL;
+ break;
+ case EEH_RESET_COMPLETE:
+ scope = OPAL_RESET_PHB_COMPLETE;
+ break;
+ case EEH_RESET_DEACTIVATE:
+ return 0;
+ default:
+ pr_warn("%s: Unsupported option %d\n",
+ __func__, option);
+ return -EINVAL;
}
-out:
- if (rc != OPAL_SUCCESS)
- return -EIO;
- return 0;
-}
-
-static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
-{
- struct pnv_phb *phb = hose->private_data;
- s64 rc = OPAL_HARDWARE;
+ /* Issue reset and poll until it's completed */
+ rc = opal_pci_reset(phb->opal_id, scope, OPAL_ASSERT_RESET);
+ if (rc > 0)
+ rc = pnv_eeh_poll(phb->opal_id);
- pr_debug("%s: Reset PHB#%x, option=%d\n",
- __func__, hose->global_number, option);
-
- /*
- * During the reset deassert time, we needn't care
- * the reset scope because the firmware does nothing
- * for fundamental or hot reset during deassert phase.
- */
- if (option == EEH_RESET_FUNDAMENTAL)
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PCI_FUNDAMENTAL,
- OPAL_ASSERT_RESET);
- else if (option == EEH_RESET_HOT)
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PCI_HOT,
- OPAL_ASSERT_RESET);
- else if (option == EEH_RESET_DEACTIVATE)
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PCI_HOT,
- OPAL_DEASSERT_RESET);
- if (rc < 0)
- goto out;
-
- /* Poll state of the PHB until the request is done */
- rc = pnv_eeh_phb_poll(phb);
- if (option == EEH_RESET_DEACTIVATE)
- msleep(EEH_PE_RST_SETTLE_TIME);
-out:
- if (rc != OPAL_SUCCESS)
- return -EIO;
-
- return 0;
+ return (rc == OPAL_SUCCESS) ? 0 : -EIO;
}
-static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
{
struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -891,14 +845,57 @@ static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
return 0;
}
+static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+ struct pci_controller *hose;
+ struct pnv_phb *phb;
+ struct device_node *dn = dev ? pci_device_to_OF_node(dev) : NULL;
+ uint64_t id = (0x1ul << 60);
+ uint8_t scope;
+ s64 rc;
+
+ /*
+ * If the firmware can't handle it, we will issue hot reset
+ * on the secondary bus despite the requested reset type
+ */
+ if (!dn || !of_get_property(dn, "ibm,reset-by-firmware", NULL))
+ return __pnv_eeh_bridge_reset(dev, option);
+
+ /* The firmware can handle the request */
+ switch (option) {
+ case EEH_RESET_HOT:
+ scope = OPAL_RESET_PCI_HOT;
+ break;
+ case EEH_RESET_FUNDAMENTAL:
+ scope = OPAL_RESET_PCI_FUNDAMENTAL;
+ break;
+ case EEH_RESET_DEACTIVATE:
+ return 0;
+ case EEH_RESET_COMPLETE:
+ default:
+ pr_warn("%s: Unsupported option %d on device %s\n",
+ __func__, option, pci_name(dev));
+ return -EINVAL;
+ }
+
+ hose = pci_bus_to_host(dev->bus);
+ phb = hose->private_data;
+ id |= (dev->bus->number << 24) | (dev->devfn << 16) | phb->opal_id;
+ rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
+ if (rc > 0)
+ pnv_eeh_poll(id);
+
+ return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+}
+
void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
{
struct pci_controller *hose;
if (pci_is_root_bus(dev->bus)) {
hose = pci_bus_to_host(dev->bus);
- pnv_eeh_root_reset(hose, EEH_RESET_HOT);
- pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+ pnv_eeh_phb_reset(hose, EEH_RESET_HOT);
+ pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
} else {
pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
@@ -920,8 +917,9 @@ void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
static int pnv_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
+ struct pnv_phb *phb;
struct pci_bus *bus;
- int ret;
+ s64 rc;
/*
* For PHB reset, we always have complete reset. For those PEs whose
@@ -937,43 +935,37 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
* reset. The side effect is that EEH core has to clear the frozen
* state explicitly after BAR restore.
*/
- if (pe->type & EEH_PE_PHB) {
- ret = pnv_eeh_phb_reset(hose, option);
- } else {
- struct pnv_phb *phb;
- s64 rc;
+ if (pe->type & EEH_PE_PHB)
+ return pnv_eeh_phb_reset(hose, EEH_RESET_COMPLETE);
- /*
- * The frozen PE might be caused by PAPR error injection
- * registers, which are expected to be cleared after hitting
- * frozen PE as stated in the hardware spec. Unfortunately,
- * that's not true on P7IOC. So we have to clear it manually
- * to avoid recursive EEH errors during recovery.
- */
- phb = hose->private_data;
- if (phb->model == PNV_PHB_MODEL_P7IOC &&
- (option == EEH_RESET_HOT ||
- option == EEH_RESET_FUNDAMENTAL)) {
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PHB_ERROR,
- OPAL_ASSERT_RESET);
- if (rc != OPAL_SUCCESS) {
- pr_warn("%s: Failure %lld clearing "
- "error injection registers\n",
- __func__, rc);
- return -EIO;
- }
+ /*
+ * The frozen PE might be caused by PAPR error injection
+ * registers, which are expected to be cleared after hitting
+ * frozen PE as stated in the hardware spec. Unfortunately,
+ * that's not true on P7IOC. So we have to clear it manually
+ * to avoid recursive EEH errors during recovery.
+ */
+ phb = hose->private_data;
+ if (phb->model == PNV_PHB_MODEL_P7IOC &&
+ (option == EEH_RESET_HOT ||
+ option == EEH_RESET_FUNDAMENTAL)) {
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_ERROR,
+ OPAL_ASSERT_RESET);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld clearing error "
+ "injection registers on PHB#%d\n",
+ __func__, rc, hose->global_number);
+ return -EIO;
}
-
- bus = eeh_pe_bus_get(pe);
- if (pci_is_root_bus(bus) ||
- pci_is_root_bus(bus->parent))
- ret = pnv_eeh_root_reset(hose, option);
- else
- ret = pnv_eeh_bridge_reset(bus->self, option);
}
- return ret;
+ /* Route the reset request to PHB or upstream bridge */
+ bus = eeh_pe_bus_get(pe);
+ if (pci_is_root_bus(bus))
+ return pnv_eeh_phb_reset(hose, option);
+
+ return pnv_eeh_bridge_reset(bus->self, option);
}
/**
--
1.8.3.2
More information about the Linuxppc-dev
mailing list