[PATCH v2 1/2] powerpc/eeh: Introduce eeh_pe_inject_err()

Gavin Shan gwshan at linux.vnet.ibm.com
Mon Mar 16 18:01:21 AEDT 2015


The patch defines PCI error types and functions in eeh.h and
exports function eeh_pe_inject_err(), which will be called by
VFIO driver to inject the specified PCI error to the indicated
PE for testing purpose.

Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
v2: Use EEH_ERR_FUNC_{MIN,MAX} to validate PCI error function
---
 arch/powerpc/include/asm/eeh.h | 26 ++++++++++++++++++++++++++
 arch/powerpc/kernel/eeh.c      | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 55abfd0..44366fa 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -195,6 +195,30 @@ enum {
 #define EEH_RESET_FUNDAMENTAL	3	/* Fundamental reset		*/
 #define EEH_LOG_TEMP		1	/* EEH temporary error log	*/
 #define EEH_LOG_PERM		2	/* EEH permanent error log	*/
+#define EEH_ERR_TYPE_32			0	/* 32-bits PCI error	*/
+#define EEH_ERR_TYPE_64			1       /* 64-bits PCI error	*/
+#define EEH_ERR_FUNC_MIN		0
+#define EEH_ERR_FUNC_LD_MEM_ADDR	0	/* Memory load	*/
+#define EEH_ERR_FUNC_LD_MEM_DATA	1
+#define EEH_ERR_FUNC_LD_IO_ADDR		2	/* IO load	*/
+#define EEH_ERR_FUNC_LD_IO_DATA		3
+#define EEH_ERR_FUNC_LD_CFG_ADDR	4	/* Config load	*/
+#define EEH_ERR_FUNC_LD_CFG_DATA	5
+#define EEH_ERR_FUNC_ST_MEM_ADDR	6	/* Memory store	*/
+#define EEH_ERR_FUNC_ST_MEM_DATA	7
+#define EEH_ERR_FUNC_ST_IO_ADDR		8	/* IO store	*/
+#define EEH_ERR_FUNC_ST_IO_DATA		9
+#define EEH_ERR_FUNC_ST_CFG_ADDR	10	/* Config store	*/
+#define EEH_ERR_FUNC_ST_CFG_DATA	11
+#define EEH_ERR_FUNC_DMA_RD_ADDR	12	/* DMA read	*/
+#define EEH_ERR_FUNC_DMA_RD_DATA	13
+#define EEH_ERR_FUNC_DMA_RD_MASTER	14
+#define EEH_ERR_FUNC_DMA_RD_TARGET	15
+#define EEH_ERR_FUNC_DMA_WR_ADDR	16	/* DMA write	*/
+#define EEH_ERR_FUNC_DMA_WR_DATA	17
+#define EEH_ERR_FUNC_DMA_WR_MASTER	18
+#define EEH_ERR_FUNC_DMA_WR_TARGET	19
+#define EEH_ERR_FUNC_MAX		19
 
 struct eeh_ops {
 	char *name;
@@ -295,6 +319,8 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option);
 int eeh_pe_get_state(struct eeh_pe *pe);
 int eeh_pe_reset(struct eeh_pe *pe, int option);
 int eeh_pe_configure(struct eeh_pe *pe);
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+		      unsigned long addr, unsigned long mask);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 19a897c..55083e5 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1651,6 +1651,46 @@ int eeh_pe_configure(struct eeh_pe *pe)
 }
 EXPORT_SYMBOL_GPL(eeh_pe_configure);
 
+/**
+ * eeh_pe_inject_err - Injecting the specified PCI error to the indicated PE
+ * @pe: the indicated PE
+ * @type: error type
+ * @function: error function
+ * @addr: address
+ * @mask: address mask
+ *
+ * The routine is called to inject the specified PCI error, which
+ * is determined by @type and @function, to the indicated PE for
+ * testing purpose.
+ */
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+		      unsigned long addr, unsigned long mask)
+{
+	/* Invalid PE ? */
+	if (!pe)
+		return -ENODEV;
+
+	/* Unsupported operation ? */
+	if (!eeh_ops || !eeh_ops->err_inject)
+		return -ENOENT;
+
+	/* Check on PCI error type */
+	switch (type) {
+	case EEH_ERR_TYPE_32:
+	case EEH_ERR_TYPE_64:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Check on PCI error function */
+	if (func < EEH_ERR_FUNC_MIN || func > EEH_ERR_FUNC_MAX)
+		return -EINVAL;
+
+	return eeh_ops->err_inject(pe, type, func, addr, mask);
+}
+EXPORT_SYMBOL_GPL(eeh_pe_inject_err);
+
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
 	if (!eeh_enabled()) {
-- 
1.8.3.2



More information about the Linuxppc-dev mailing list