[PATCH 2/2] drivers/vfio: Support EEH error injection

[Gavin Shan]

On Fri, Mar 13, 2015 at 02:35:18PM -0600, Alex Williamson wrote:
>On Wed, 2015-03-11 at 17:34 +1100, Gavin Shan wrote:
>> The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
>> to inject the specified EEH error, which is represented by
>> (struct vfio_eeh_pe_err), to the indicated PE for testing purpose.
>> 
>> Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
>> ---
>>  Documentation/vfio.txt        | 47 ++++++++++++++++++++++++++++++-------------
>>  drivers/vfio/vfio_spapr_eeh.c | 14 +++++++++++++
>>  include/uapi/linux/vfio.h     | 34 ++++++++++++++++++++++++++++++-
>>  3 files changed, 80 insertions(+), 15 deletions(-)
>> 
>> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>[snip]
>> @@ -490,6 +499,29 @@ struct vfio_eeh_pe_op {
>>  #define VFIO_EEH_PE_RESET_HOT		6	/* Assert hot reset          */
>>  #define VFIO_EEH_PE_RESET_FUNDAMENTAL	7	/* Assert fundamental reset  */
>>  #define VFIO_EEH_PE_CONFIGURE		8	/* PE configuration          */
>> +#define VFIO_EEH_PE_INJECT_ERR		9	/* Inject EEH error          */
>> +#define  VFIO_EEH_ERR_TYPE_32		0	/* 32-bits EEH error type    */
>> +#define  VFIO_EEH_ERR_TYPE_64		1	/* 64-bits EEH error type    */
>> +#define  VFIO_EEH_ERR_FUNC_LD_MEM_ADDR		0	/* Memory load  */
>> +#define  VFIO_EEH_ERR_FUNC_LD_MEM_DATA		1
>> +#define  VFIO_EEH_ERR_FUNC_LD_IO_ADDR		2	/* IO load      */
>> +#define  VFIO_EEH_ERR_FUNC_LD_IO_DATA		3
>> +#define  VFIO_EEH_ERR_FUNC_LD_CFG_ADDR		4	/* Config load  */
>> +#define  VFIO_EEH_ERR_FUNC_LD_CFG_DATA		5
>> +#define  VFIO_EEH_ERR_FUNC_ST_MEM_ADDR		6	/* Memory store */
>> +#define  VFIO_EEH_ERR_FUNC_ST_MEM_DATA		7
>> +#define  VFIO_EEH_ERR_FUNC_ST_IO_ADDR		8	/* IO store     */
>> +#define  VFIO_EEH_ERR_FUNC_ST_IO_DATA		9
>> +#define  VFIO_EEH_ERR_FUNC_ST_CFG_ADDR		10	/* Config store */
>> +#define  VFIO_EEH_ERR_FUNC_ST_CFG_DATA		11
>> +#define  VFIO_EEH_ERR_FUNC_DMA_RD_ADDR		12	/* DMA read     */
>> +#define  VFIO_EEH_ERR_FUNC_DMA_RD_DATA		13
>> +#define  VFIO_EEH_ERR_FUNC_DMA_RD_MASTER	14
>> +#define  VFIO_EEH_ERR_FUNC_DMA_RD_TARGET	15
>> +#define  VFIO_EEH_ERR_FUNC_DMA_WR_ADDR		16	/* DMA write    */
>> +#define  VFIO_EEH_ERR_FUNC_DMA_WR_DATA		17
>> +#define  VFIO_EEH_ERR_FUNC_DMA_WR_MASTER	18
>> +#define  VFIO_EEH_ERR_FUNC_DMA_WR_TARGET	19
>
>This data duplication from patch 1/2 is kind of concerning.  In one case
>we're adding to arch/powerpc/include/asm/eeh.h, which is a kernel
>internal interface and entirely changeable, in the other we're matching
>those current definitions in uapi, which needs to be stable.  Are these
>indexes part of a spec that we can rely on them being stable or do we
>need some sort of translation layer to go from the vfio uapi defined
>value to the kernel internal version?  Thanks,
>

All those constants are defined by PAPR specification, and those constants
defined here or by PATCH[1/2] aren't expected to be changed.

Thanks,
Gavin

>Alex
>
>