[PATCH v15 19/19] perf, tools: Add README for info on parsing JSON/map files

Sukadev Bhattiprolu sukadev at linux.vnet.ibm.com
Wed Jun 10 17:25:23 AEST 2015


Signed-off-by: Sukadev Bhattiprolu <sukadev at linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa at redhat.com>
---
 tools/perf/pmu-events/README | 122 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)
 create mode 100644 tools/perf/pmu-events/README

diff --git a/tools/perf/pmu-events/README b/tools/perf/pmu-events/README
new file mode 100644
index 0000000..da57cb5
--- /dev/null
+++ b/tools/perf/pmu-events/README
@@ -0,0 +1,122 @@
+
+The contents of this directory allow users to specify PMU events in
+their CPUs by their symbolic names rather than raw event codes (see
+example below).
+
+The main program in this directory, is the 'jevents', which is built and
+executed _before_ the perf binary itself is built.
+
+The 'jevents' program tries to locate and process JSON files in the directory
+tree tools/perf/pmu-events/arch/foo.
+
+	- Regular files with '.json' extension in the name are assumed to be
+	  JSON files, each of which describes a set of PMU events.
+
+	- Regular files with basename starting with 'mapfile.csv' are assumed
+	  to be a CSV file that maps a specific CPU to its set of PMU events.
+	  (see below for mapfile format)
+
+	- Directories are traversed, but all other files are ignored.
+
+Using the JSON files and the mapfile, 'jevents' generates the C source file,
+'pmu-events.c', which encodes the two sets of tables:
+
+	- Set of 'PMU events tables' for all known CPUs in the architecture,
+	  (one table like the following, per JSON file; table name 'pme_power8'
+	  is derived from JSON file name, 'power8.json').
+
+		struct pmu_event pme_power8[] = {
+
+			...
+
+			{
+				.name = "pm_1plus_ppc_cmpl",
+				.event = "event=0x100f2",
+				.desc = "1 or more ppc insts finished,",
+			},
+
+			...
+		}
+
+	- A 'mapping table' that maps each CPU of the architecture, to its
+	  'PMU events table'
+
+		struct pmu_events_map pmu_events_map[] = {
+		{
+			.cpuid = "004b0000",
+			.version = "1",
+			.type = "core",
+			.table = pme_power8
+		},
+			...
+
+		};
+
+After the 'pmu-events.c' is generated, it is compiled and the resulting
+'pmu-events.o' is added to 'libperf.a' which is then used to build perf.
+
+NOTES:
+	1. Several CPUs can support same set of events and hence use a common
+	   JSON file. Hence several entries in the pmu_events_map[] could map
+	   to a single 'PMU events table'.
+
+	2. The 'pmu-events.h' has an extern declaration for the mapping table
+	   and the generated 'pmu-events.c' defines this table.
+
+	3. _All_ known CPU tables for architecture are included in the perf
+	   binary.
+
+At run time, perf determines the actual CPU it is running on, finds the
+matching events table and builds aliases for those events. This allows
+users to specify events by their name:
+
+	$ perf stat -e pm_1plus_ppc_cmpl sleep 1
+
+where 'pm_1plus_ppc_cmpl' is a Power8 PMU event.
+
+In case of errors when processing files in the tools/perf/pmu-events/arch
+directory, 'jevents' tries to create an empty mapping file to allow the perf
+build to succeed even if the PMU event aliases cannot be used.
+
+However some errors in processing may cause the perf build to fail.
+
+Mapfile format
+===============
+
+The mapfile.csv format is expected to be:
+
+	Header line
+	CPUID,Version,File/path/name.json,Type
+
+where:
+
+	Comma:
+		is the required field delimiter (i.e other fields cannot
+		have commas within them).
+
+	Comments:
+		Lines in which the first character is either '\n' or '#'
+		are ignored.
+
+	Header line
+		The header line is the first line in the file, which is
+		_IGNORED_. It can be a comment (begin with '#') or empty.
+
+	CPUID:
+		CPUID is an arch-specific char string, that can be used
+		to identify CPU (and associate it with a set of PMU events
+		it supports). Multiple CPUIDS can point to the same
+		File/path/name.json.
+
+		Example:
+			CPUID == 'GenuineIntel-6-2E' (on x86).
+			CPUID == '004b0100' (PVR value in Powerpc)
+	Version:
+		is the Version of the mapfile.
+
+	File/path/name.json:
+		is the pathname for the JSON file, relative to the directory
+		containing the mapfile.csv
+
+	Type:
+		indicates whether the events or "core" or "uncore" events.
-- 
1.8.3.1



More information about the Linuxppc-dev mailing list