[PATCH v5 09/42] powerpc/powernv: pnv_ioda_setup_dma() configure one PE only

[Gavin Shan]

The original implementation of pnv_ioda_setup_dma() iterates the
list of PEs and configures the DMA32 space for them one by one.
The function was designed to be called during PHB fixup time.
When configuring PE's DMA32 space in pcibios_setup_bridge(), in
order to support PCI hotplug, we have to have the function PE
oriented.

The patch introduces one more argument "struct pnv_ioda_pe *pe"
to pnv_ioda_setup_dma(). The caller, pnv_pci_ioda_setup_DMA(),
gets PE from the list and passes to it. The patch shouldn't
cause logic changes.

Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
v5:
  * Split from PATCH[v4 06/21]
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 60 ++++++++++++++-----------------
 1 file changed, 27 insertions(+), 33 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 4af3d06..63fad4d 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2558,12 +2558,14 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		pnv_ioda_setup_bus_dma(pe, pe->pbus);
 }
 
-static void pnv_ioda_setup_dma(struct pnv_phb *phb)
+static void pnv_ioda_setup_dma(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 {
 	struct pci_controller *hose = phb->hose;
-	struct pnv_ioda_pe *pe;
 	unsigned int dma_weight;
 
+	if (!pe->dma32_weight)
+		return;
+
 	/* Calculate the PHB's DMA weight */
 	dma_weight = pnv_ioda_phb_dma_weight(phb);
 	pr_info("PCI%04x has %ld DMA32 segments, total weight %d\n",
@@ -2571,38 +2573,28 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
 
 	pnv_pci_ioda_setup_opal_tce_kill(phb);
 
-	/* Walk our PE list and configure their DMA segments, hand them
-	 * out one base segment plus any residual segments based on
-	 * weight
+	/*
+	 * For IODA2 compliant PHB3, we needn't care about the weight.
+	 * The all available 32-bits DMA space will be assigned to
+	 * the specific PE.
 	 */
-	list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
-		if (!pe->dma32_weight)
-			continue;
+	if (phb->type == PNV_PHB_IODA1) {
+		unsigned int segs, base = 0;
 
-		/*
-		 * For IODA2 compliant PHB3, we needn't care about the weight.
-		 * The all available 32-bits DMA space will be assigned to
-		 * the specific PE.
-		 */
-		if (phb->type == PNV_PHB_IODA1) {
-			unsigned int segs, base = 0;
-
-			if (pe->dma32_weight <
-			    dma_weight / phb->ioda.dma32_segcount)
-				segs = 1;
-			else
-				segs = (pe->dma32_weight *
-					phb->ioda.dma32_segcount) / dma_weight;
-
-			pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
-				pe->dma32_weight, segs);
-			pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+		if (pe->dma32_weight <
+		    dma_weight / phb->ioda.dma32_segcount)
+			segs = 1;
+		else
+			segs = (pe->dma32_weight *
+				phb->ioda.dma32_segcount) / dma_weight;
 
-			base += segs;
-		} else {
-			pe_info(pe, "Assign DMA32 space\n");
-			pnv_pci_ioda2_setup_dma_pe(phb, pe);
-		}
+		pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+			pe->dma32_weight, segs);
+		pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+		base += segs;
+	} else {
+		pe_info(pe, "Assign DMA32 space\n");
+		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 	}
 }
 
@@ -3073,12 +3065,14 @@ static void pnv_pci_ioda_setup_DMA(void)
 {
 	struct pci_controller *hose, *tmp;
 	struct pnv_phb *phb;
+	struct pnv_ioda_pe *pe;
 
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		pnv_ioda_setup_dma(hose->private_data);
+		phb = hose->private_data;
+		list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link)
+			pnv_ioda_setup_dma(phb, pe);
 
 		/* Mark the PHB initialization done */
-		phb = hose->private_data;
 		phb->initialized = 1;
 	}
 }
-- 
2.1.0