[PATCH] cxl: Set up and enable PSL Timebase

[Michael Neuling]

On Thu, 2015-05-28 at 15:12 +0200, Philippe Bergheaud wrote:
> This patch configures the PSL Timebase function and enables it,
> after the CAPP has been initialized by OPAL. Failures are reported
> and ignored.

Needs an Signed-off-by.  

Comments inline.

> ---
>  drivers/misc/cxl/cxl.h |    5 +++++
>  drivers/misc/cxl/pci.c |   35 +++++++++++++++++++++++++++++++++++
>  2 files changed, 40 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
> index a1cee47..38a7cf9 100644
> --- a/drivers/misc/cxl/cxl.h
> +++ b/drivers/misc/cxl/cxl.h
> @@ -82,8 +82,10 @@ static const cxl_p1_reg_t CXL_PSL_AFUSEL  = {0x00B0};
>  /* 0x00C0:7EFF Implementation dependent area */
>  static const cxl_p1_reg_t CXL_PSL_FIR1      = {0x0100};
>  static const cxl_p1_reg_t CXL_PSL_FIR2      = {0x0108};
> +static const cxl_p1_reg_t CXL_PSL_Timebase  = {0x0110};
>  static const cxl_p1_reg_t CXL_PSL_VERSION   = {0x0118};
>  static const cxl_p1_reg_t CXL_PSL_RESLCKTO  = {0x0128};
> +static const cxl_p1_reg_t CXL_PSL_TB_CTLSTAT = {0x0140};
>  static const cxl_p1_reg_t CXL_PSL_FIR_CNTL  = {0x0148};
>  static const cxl_p1_reg_t CXL_PSL_DSNDCTL   = {0x0150};
>  static const cxl_p1_reg_t CXL_PSL_SNWRALLOC = {0x0158};
> @@ -151,6 +153,9 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An     = {0x0A0};
>  #define CXL_PSL_SPAP_Size_Shift 4
>  #define CXL_PSL_SPAP_V    0x0000000000000001ULL
>  
> +/****** CXL_PSL_Control ****************************************************/
> +#define CXL_PSL_Control_tb 0x0000000000000001ULL
> +
>  /****** CXL_PSL_DLCNTL *****************************************************/
>  #define CXL_PSL_DLCNTL_D (0x1ull << (63-28))
>  #define CXL_PSL_DLCNTL_C (0x1ull << (63-29))
> diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
> index fc938de..afd89cc 100644
> --- a/drivers/misc/cxl/pci.c
> +++ b/drivers/misc/cxl/pci.c
> @@ -360,6 +360,38 @@ static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev
>  	return 0;
>  }
>  
> +#define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
> +
> +static int cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
> +{
> +	u64 psl_tb;
> +	int delta;
> +	unsigned int retry = 0;
> +
> +	/*
> +	 * Setup PSL Timebase Control and Status register
> +	 * with the recommended Timebase Sync Count value
> +	 */
> +	cxl_p1_write(adapter, CXL_PSL_TB_CTLSTAT, TBSYNC_CNT(2));  

2?  

> +
> +	/* Enable PSL Timebase */
> +	cxl_p1_write(adapter, CXL_PSL_Control, CXL_PSL_Control_tb);
> +	/* Wait until CORE TB and PSL TB difference <= 16usecs */

How many tries does this normally take?  

Should we have a sleep in here to wait for it to sync rather than just
coming back around right away?

> +	do {
> +		if (retry++ > 5) {
> +			pr_err("PSL: Timebase sync: giving up!\n");
> +			return 1;

Please use negative error codes here.  -EIO?

> +		}
> +		psl_tb = cxl_p1_read(adapter, CXL_PSL_Timebase);
> +		delta = mftb() - psl_tb;
> +		if (delta < 0)
> +			delta = -delta;
> +	} while (cputime_to_usecs(delta) > 16);
> +
> +	dev_info(&dev->dev, "PSL: Timebase synced\n");
> +	return 0;
> +}
> +
>  static int init_implementation_afu_regs(struct cxl_afu *afu)
>  {
>  	/* read/write masks for this slice */
> @@ -995,6 +1027,9 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev)
>  	if ((rc = pnv_phb_to_cxl(dev, OPAL_PHB_CAPI_MODE_CAPI)))
>  		goto err3;
>  
> +	/* Don't care if this one fails: */
> +	cxl_setup_psl_timebase(adapter, dev);

And check it here.

Thanks,
Mikey

> +
>  	if ((rc = cxl_register_psl_err_irq(adapter)))
>  		goto err3;
>