[v3, 7/9] fsl/fman: Add FMan SP support
igal.liberman at freescale.com
igal.liberman at freescale.com
Wed Jul 22 21:22:39 AEST 2015
From: Igal Liberman <Igal.Liberman at freescale.com>
Add Storage Profiles support.
The Storage Profiles contain parameters that are used by the FMan in
order to store frames being received on the Rx ports, or to
determine the parameters that affect writing the Internal Context
in the frame margin on Tx.
Signed-off-by: Igal Liberman <Igal.Liberman at freescale.com>
---
drivers/net/ethernet/freescale/fman/Makefile | 2 +
drivers/net/ethernet/freescale/fman/fm_sp_common.h | 105 ++++++
drivers/net/ethernet/freescale/fman/sp/Makefile | 3 +
drivers/net/ethernet/freescale/fman/sp/fm_sp.c | 371 ++++++++++++++++++++
4 files changed, 481 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/fman/fm_sp_common.h
create mode 100644 drivers/net/ethernet/freescale/fman/sp/Makefile
create mode 100644 drivers/net/ethernet/freescale/fman/sp/fm_sp.c
diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile
index f61d3a6..c6c3e24 100644
--- a/drivers/net/ethernet/freescale/fman/Makefile
+++ b/drivers/net/ethernet/freescale/fman/Makefile
@@ -8,3 +8,5 @@ fsl_fman-objs := fman.o fm_muram.o fm.o fm_drv.o
obj-y += port/
obj-y += mac/
+obj-y += sp/
+
diff --git a/drivers/net/ethernet/freescale/fman/fm_sp_common.h b/drivers/net/ethernet/freescale/fman/fm_sp_common.h
new file mode 100644
index 0000000..56bd749
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/fm_sp_common.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* FM SP ... */
+#ifndef __FM_SP_COMMON_H
+#define __FM_SP_COMMON_H
+
+#include "fm_ext.h"
+#include "fsl_fman.h"
+
+#define ILLEGAL_BASE (~0)
+
+/* defaults */
+#define DEFAULT_FM_SP_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE 0
+#define DEFAULT_FM_SP_BUFFER_PREFIX_CONTENT_PRIV_PASS_PRS_RESULT false
+#define DEFAULT_FM_SP_BUFFER_PREFIX_CONTEXT_PASS_TIME_STAMP false
+#define DEFAULT_FM_SP_BUFFER_PREFIX_CONTEXT_DATA_ALIGN 64
+
+/* structure for defining internal context copying */
+struct fm_sp_int_context_data_copy_t {
+ /* < Offset in External buffer to which internal
+ * context is copied to (Rx) or taken from (Tx, Op).
+ */
+ u16 ext_buf_offset;
+ /* Offset within internal context to copy from
+ * (Rx) or to copy to (Tx, Op).
+ */
+ u8 int_context_offset;
+ /* Internal offset size to be copied */
+ u16 size;
+};
+
+/* struct for defining external buffer margins */
+struct fm_sp_buf_margins_t {
+ /* Number of bytes to be left at the beginning
+ * of the external buffer (must be divisible by 16)
+ */
+ u16 start_margins;
+ /* number of bytes to be left at the end
+ * of the external buffer(must be divisible by 16)
+ */
+ u16 end_margins;
+};
+
+struct fm_sp_buffer_offsets_t {
+ u32 data_offset;
+ u32 prs_result_offset;
+ u32 time_stamp_offset;
+ u32 hash_result_offset;
+};
+
+int fm_sp_build_buffer_structure(struct fm_sp_int_context_data_copy_t
+ *fm_port_int_context_data_copy,
+ struct fm_buffer_prefix_content_t
+ *buffer_prefix_content,
+ struct fm_sp_buf_margins_t
+ *fm_port_buf_margins,
+ struct fm_sp_buffer_offsets_t
+ *fm_port_buffer_offsets,
+ u8 *internal_buf_offset);
+
+int fm_sp_check_int_context_params(struct fm_sp_int_context_data_copy_t *
+ fm_sp_int_context_data_copy);
+int fm_sp_check_buf_pools_params(struct fm_ext_pools_t *fm_ext_pools,
+ struct fm_backup_bm_pools_t
+ *fm_backup_bm_pools,
+ struct fm_buf_pool_depletion_t
+ *fm_buf_pool_depletion,
+ u32 max_num_of_ext_pools,
+ u32 bm_max_num_of_pools);
+int fm_sp_check_buf_margins(struct fm_sp_buf_margins_t *fm_sp_buf_margins);
+void fm_sp_set_buf_pools_in_asc_order_of_buf_sizes(struct fm_ext_pools_t
+ *fm_ext_pools,
+ u8 *ordered_array,
+ u16 *sizes_array);
+#endif /* __FM_SP_COMMON_H */
diff --git a/drivers/net/ethernet/freescale/fman/sp/Makefile b/drivers/net/ethernet/freescale/fman/sp/Makefile
new file mode 100644
index 0000000..545e686
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/sp/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_FSL_FMAN) += fsl_fman_sp.o
+
+fsl_fman_sp-objs := fm_sp.o
diff --git a/drivers/net/ethernet/freescale/fman/sp/fm_sp.c b/drivers/net/ethernet/freescale/fman/sp/fm_sp.c
new file mode 100644
index 0000000..773dcbd
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/sp/fm_sp.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fm_sp_common.h"
+#include "fm_common.h"
+#include "fsl_fman_sp.h"
+
+#include <linux/string.h>
+
+void fm_sp_set_buf_pools_in_asc_order_of_buf_sizes(struct fm_ext_pools_t
+ *fm_ext_pools,
+ u8 *ordered_array,
+ u16 *sizes_array)
+{
+ u16 buf_size = 0;
+ int i = 0, j = 0, k = 0;
+
+ /* First we copy the external buffers pools information
+ * to an ordered local array
+ */
+ for (i = 0; i < fm_ext_pools->num_of_pools_used; i++) {
+ /* get pool size */
+ buf_size = fm_ext_pools->ext_buf_pool[i].size;
+
+ /* keep sizes in an array according to poolId
+ * for direct access
+ */
+ sizes_array[fm_ext_pools->ext_buf_pool[i].id] = buf_size;
+
+ /* save poolId in an ordered array according to size */
+ for (j = 0; j <= i; j++) {
+ /* this is the next free place in the array */
+ if (j == i)
+ ordered_array[i] =
+ fm_ext_pools->ext_buf_pool[i].id;
+ else {
+ /* find the right place for this poolId */
+ if (buf_size < sizes_array[ordered_array[j]]) {
+ /* move the pool_ids one place ahead
+ * to make room for this poolId
+ */
+ for (k = i; k > j; k--)
+ ordered_array[k] =
+ ordered_array[k - 1];
+
+ /* now k==j, this is the place for
+ * the new size
+ */
+ ordered_array[k] =
+ fm_ext_pools->ext_buf_pool[i].id;
+ break;
+ }
+ }
+ }
+ }
+}
+
+int fm_sp_check_buf_pools_params(struct fm_ext_pools_t *fm_ext_pools,
+ struct fm_backup_bm_pools_t
+ *fm_backup_bm_pools,
+ struct fm_buf_pool_depletion_t
+ *fm_buf_pool_depletion,
+ u32 max_num_of_ext_pools,
+ u32 bm_max_num_of_pools)
+{
+ int i = 0, j = 0;
+ bool found;
+ u8 count = 0;
+
+ if (fm_ext_pools) {
+ if (fm_ext_pools->num_of_pools_used > max_num_of_ext_pools) {
+ pr_err("num_of_pools_used can't be larger than %d\n",
+ max_num_of_ext_pools);
+ return -EINVAL;
+ }
+ for (i = 0; i < fm_ext_pools->num_of_pools_used; i++) {
+ if (fm_ext_pools->ext_buf_pool[i].id >=
+ bm_max_num_of_pools) {
+ pr_err("ext_buf_pools.ext_buf_pool[%d].id can't be larger than %d\n",
+ i, bm_max_num_of_pools);
+ return -EINVAL;
+ }
+ if (!fm_ext_pools->ext_buf_pool[i].size) {
+ pr_err("ext_buf_pools.ext_buf_pool[%d].size is 0\n",
+ i);
+ return -EINVAL;
+ }
+ }
+ }
+ if (!fm_ext_pools && (fm_backup_bm_pools || fm_buf_pool_depletion)) {
+ pr_err("backup_bm_pools ot buf_pool_depletion can not be defined without external pools\n");
+ return -EINVAL;
+ }
+ /* backup BM pools indication is valid only for some chip derivatives
+ * (limited by the config routine)
+ */
+ if (fm_backup_bm_pools) {
+ if (fm_backup_bm_pools->num_of_backup_pools >=
+ fm_ext_pools->num_of_pools_used) {
+ pr_err("backup_bm_pools must be smaller than ext_buf_pools.num_of_pools_used\n");
+ return -EINVAL;
+ }
+ found = false;
+ for (i = 0; i < fm_backup_bm_pools->num_of_backup_pools; i++) {
+ for (j = 0; j < fm_ext_pools->num_of_pools_used; j++) {
+ if (fm_backup_bm_pools->pool_ids[i] ==
+ fm_ext_pools->ext_buf_pool[j].id) {
+ found = true;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("All backup_bm_pools.pool_ids must be included in ext_buf_pools.ext_buf_pool[n].id\n");
+ return -EINVAL;
+ }
+ found = false;
+ }
+ }
+
+ /* up to ext_buf_pools.num_of_pools_used pools may be defined */
+ if (fm_buf_pool_depletion && fm_buf_pool_depletion->
+ pools_grp_mode_enable) {
+ if ((fm_buf_pool_depletion->num_of_pools >
+ fm_ext_pools->num_of_pools_used)) {
+ pr_err("buf_pool_depletion.num_of_pools can't be larger than %d and can't be larger than num_of_pools_used\n",
+ max_num_of_ext_pools);
+ return -EINVAL;
+ }
+ if (!fm_buf_pool_depletion->num_of_pools) {
+ pr_err("buf_pool_depletion.num_of_pools_to_consider can not be 0 when pools_grp_mode_enable=true\n");
+ return -EINVAL;
+ }
+ found = false;
+ count = 0;
+ /* for each pool that is in pools_to_consider, check if it
+ * is defined in ext_buf_pool
+ */
+ for (i = 0; i < bm_max_num_of_pools; i++) {
+ if (fm_buf_pool_depletion->pools_to_consider[i]) {
+ for (j = 0; j < fm_ext_pools->num_of_pools_used;
+ j++) {
+ if (i == fm_ext_pools->
+ ext_buf_pool[j].id) {
+ found = true;
+ count++;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("Pools selected for depletion are not used.\n");
+ return -EINVAL;
+ }
+ found = false;
+ }
+ }
+ /* check that the number of pools that we have checked is
+ * equal to the number announced by the user
+ */
+ if (count != fm_buf_pool_depletion->num_of_pools) {
+ pr_err("buf_pool_depletion.num_of_pools is larger than the number of pools defined.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (fm_buf_pool_depletion && fm_buf_pool_depletion->
+ single_pool_mode_enable) {
+ /* calculate vector for number of pools depletion */
+ found = false;
+ count = 0;
+ for (i = 0; i < bm_max_num_of_pools; i++) {
+ if (fm_buf_pool_depletion->
+ pools_to_consider_for_single_mode[i]) {
+ for (j = 0; j < fm_ext_pools->num_of_pools_used;
+ j++) {
+ if (i == fm_ext_pools->
+ ext_buf_pool[j].id) {
+ found = true;
+ count++;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("Pools selected for depletion are not used.\n");
+ return -EINVAL;
+ }
+ found = false;
+ }
+ }
+ if (!count) {
+ pr_err("No pools defined for single buffer mode pool depletion.\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+int fm_sp_check_int_context_params(struct fm_sp_int_context_data_copy_t *
+ fm_sp_int_context_data_copy)
+{
+ /* Check that divisible by 16 and not larger than 240 */
+ if (fm_sp_int_context_data_copy->int_context_offset > MAX_INT_OFFSET) {
+ pr_err("int_context.int_context_offset can't be larger than %d\n",
+ MAX_INT_OFFSET);
+ return -EINVAL;
+ }
+ if (fm_sp_int_context_data_copy->int_context_offset % OFFSET_UNITS) {
+ pr_err("int_context.int_context_offset has to be divisible by %d\n",
+ OFFSET_UNITS);
+ return -EINVAL;
+ }
+ /* check that ic size+ic internal offset, does not exceed
+ * ic block size
+ */
+ if (fm_sp_int_context_data_copy->size +
+ fm_sp_int_context_data_copy->int_context_offset > MAX_IC_SIZE) {
+ pr_err("int_context.size + int_context.int_context_offset has to be smaller than %d\n",
+ MAX_IC_SIZE);
+ return -EINVAL;
+ }
+ /* Check that divisible by 16 and not larger than 256 */
+ if (fm_sp_int_context_data_copy->size % OFFSET_UNITS) {
+ pr_err("int_context.size has to be divisible by %d\n",
+ OFFSET_UNITS);
+ return -EINVAL;
+ }
+ /* Check that divisible by 16 and not larger than 4K */
+ if (fm_sp_int_context_data_copy->ext_buf_offset > MAX_EXT_OFFSET) {
+ pr_err("int_context.ext_buf_offset can't be larger than %d\n",
+ MAX_EXT_OFFSET);
+ return -EINVAL;
+ }
+ if (fm_sp_int_context_data_copy->ext_buf_offset % OFFSET_UNITS) {
+ pr_err("int_context.ext_buf_offset has to be divisible by %d\n",
+ OFFSET_UNITS);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int fm_sp_check_buf_margins(struct fm_sp_buf_margins_t *fm_sp_buf_margins)
+{
+ /* Check the margin definition */
+ if (fm_sp_buf_margins->start_margins > MAX_EXT_BUFFER_OFFSET) {
+ pr_err("buf_margins.start_margins can't be larger than %d\n",
+ MAX_EXT_BUFFER_OFFSET);
+ return -EINVAL;
+ }
+ if (fm_sp_buf_margins->end_margins > MAX_EXT_BUFFER_OFFSET) {
+ pr_err("buf_margins.end_margins can't be larger than %d\n",
+ MAX_EXT_BUFFER_OFFSET);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int fm_sp_build_buffer_structure(struct fm_sp_int_context_data_copy_t *
+ fm_sp_int_context_data_copy,
+ struct fm_buffer_prefix_content_t *
+ buffer_prefix_content,
+ struct fm_sp_buf_margins_t
+ *fm_sp_buf_margins,
+ struct fm_sp_buffer_offsets_t
+ *fm_sp_buffer_offsets,
+ u8 *internal_buf_offset)
+{
+ u32 tmp;
+
+ /* Align start of internal context data to 16 byte */
+ fm_sp_int_context_data_copy->ext_buf_offset = (u16)
+ ((buffer_prefix_content->priv_data_size & (OFFSET_UNITS - 1)) ?
+ ((buffer_prefix_content->priv_data_size + OFFSET_UNITS) &
+ ~(u16)(OFFSET_UNITS - 1)) :
+ buffer_prefix_content->priv_data_size);
+
+ /* Translate margin and int_context params to FM parameters */
+ /* Initialize with illegal value. Later we'll set legal values. */
+ fm_sp_buffer_offsets->prs_result_offset = (u32)ILLEGAL_BASE;
+ fm_sp_buffer_offsets->time_stamp_offset = (u32)ILLEGAL_BASE;
+ fm_sp_buffer_offsets->hash_result_offset = (u32)ILLEGAL_BASE;
+
+ /* Internally the driver supports 4 options
+ * 1. prsResult/timestamp/hashResult selection (in fact 8 options,
+ * but for simplicity we'll
+ * relate to it as 1).
+ * 2. All IC context (from AD) not including debug.
+ */
+
+ /* This case covers the options under 1 */
+ /* Copy size must be in 16-byte granularity. */
+ fm_sp_int_context_data_copy->size =
+ (u16)((buffer_prefix_content->pass_prs_result ? 32 : 0) +
+ ((buffer_prefix_content->pass_time_stamp ||
+ buffer_prefix_content->pass_hash_result) ? 16 : 0));
+
+ /* Align start of internal context data to 16 byte */
+ fm_sp_int_context_data_copy->int_context_offset =
+ (u8)(buffer_prefix_content->pass_prs_result ? 32 :
+ ((buffer_prefix_content->pass_time_stamp ||
+ buffer_prefix_content->pass_hash_result) ? 64 : 0));
+
+ if (buffer_prefix_content->pass_prs_result)
+ fm_sp_buffer_offsets->prs_result_offset =
+ fm_sp_int_context_data_copy->ext_buf_offset;
+ if (buffer_prefix_content->pass_time_stamp)
+ fm_sp_buffer_offsets->time_stamp_offset =
+ buffer_prefix_content->pass_prs_result ?
+ (fm_sp_int_context_data_copy->ext_buf_offset +
+ sizeof(struct fm_prs_result_t)) :
+ fm_sp_int_context_data_copy->ext_buf_offset;
+ if (buffer_prefix_content->pass_hash_result)
+ /* If PR is not requested, whether TS is
+ * requested or not, IC will be copied from TS
+ */
+ fm_sp_buffer_offsets->hash_result_offset =
+ buffer_prefix_content->pass_prs_result ?
+ (fm_sp_int_context_data_copy->ext_buf_offset +
+ sizeof(struct fm_prs_result_t) + 8) :
+ fm_sp_int_context_data_copy->ext_buf_offset + 8;
+
+ if (fm_sp_int_context_data_copy->size)
+ fm_sp_buf_margins->start_margins =
+ (u16)(fm_sp_int_context_data_copy->ext_buf_offset +
+ fm_sp_int_context_data_copy->size);
+ else
+ /* No Internal Context passing, STartMargin is
+ * immediately after private_info
+ */
+ fm_sp_buf_margins->start_margins =
+ buffer_prefix_content->priv_data_size;
+
+ /* align data start */
+ tmp = (u32)(fm_sp_buf_margins->start_margins %
+ buffer_prefix_content->data_align);
+ if (tmp)
+ fm_sp_buf_margins->start_margins +=
+ (buffer_prefix_content->data_align - tmp);
+ fm_sp_buffer_offsets->data_offset = fm_sp_buf_margins->start_margins;
+
+ return 0;
+}
+
--
1.7.9.5
More information about the Linuxppc-dev
mailing list