[PATCH v6 1/3] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states

Vasant Hegde hegdevasant at linux.vnet.ibm.com
Fri Jul 17 20:41:09 AEST 2015


From: Anshuman Khandual <khandual at linux.vnet.ibm.com>

This patch registers the following two new OPAL interfaces calls
for the platform LED subsystem. With the help of these new OPAL calls,
the kernel will be able to get or set the state of various individual
LEDs on the system at any given location code which is passed through
the LED specific device tree nodes.

	(1) OPAL_LEDS_GET_INDICATOR     opal_leds_get_ind
	(2) OPAL_LEDS_SET_INDICATOR     opal_leds_set_ind

Signed-off-by: Anshuman Khandual <khandual at linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart at linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart at linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
 arch/powerpc/include/asm/opal-api.h            | 25 ++++++++++++++++++++++++-
 arch/powerpc/include/asm/opal.h                |  4 ++++
 arch/powerpc/platforms/powernv/opal-wrappers.S |  2 ++
 3 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index e9e4c52..8f8c45f 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -154,7 +154,9 @@
 #define OPAL_FLASH_WRITE			111
 #define OPAL_FLASH_ERASE			112
 #define OPAL_PRD_MSG				113
-#define OPAL_LAST				113
+#define OPAL_LEDS_GET_INDICATOR			114
+#define OPAL_LEDS_SET_INDICATOR			115
+#define OPAL_LAST				115
 
 /* Device tree flags */
 
@@ -756,6 +758,27 @@ struct opal_i2c_request {
 	__be64 buffer_ra;		/* Buffer real address */
 };
 
+/* LED Mode */
+#define POWERNV_LED_MODE_LIGHT_PATH	"lightpath"
+#define POWERNV_LED_MODE_GUIDING_LIGHT	"guidinglight"
+
+/* LED type */
+#define POWERNV_LED_TYPE_IDENTIFY	"identify"
+#define POWERNV_LED_TYPE_FAULT		"fault"
+#define POWERNV_LED_TYPE_ATTENTION	"attention"
+
+enum OpalSlotLedType {
+	OPAL_SLOT_LED_TYPE_ID = 0,	/* IDENTIFY LED */
+	OPAL_SLOT_LED_TYPE_FAULT = 1,	/* FAULT LED */
+	OPAL_SLOT_LED_TYPE_ATTN = 2,	/* System Attention LED */
+	OPAL_SLOT_LED_TYPE_MAX = 3
+};
+
+enum OpalSlotLedState {
+	OPAL_SLOT_LED_STATE_OFF = 0,	/* LED is OFF */
+	OPAL_SLOT_LED_STATE_ON = 1	/* LED is ON */
+};
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_API_H */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 958e941..3233e6d 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -195,6 +195,10 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
 int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
 			 struct opal_i2c_request *oreq);
 int64_t opal_prd_msg(struct opal_prd_msg *msg);
+int64_t opal_leds_get_ind(char *loc_code, __be64 *led_mask,
+			  __be64 *led_value, __be64 *max_led_type);
+int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask,
+			  const u64 led_value, __be64 *max_led_type);
 
 int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf,
 		uint64_t size, uint64_t token);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index d6a7b82..34c2734 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -297,3 +297,5 @@ OPAL_CALL(opal_flash_read,			OPAL_FLASH_READ);
 OPAL_CALL(opal_flash_write,			OPAL_FLASH_WRITE);
 OPAL_CALL(opal_flash_erase,			OPAL_FLASH_ERASE);
 OPAL_CALL(opal_prd_msg,				OPAL_PRD_MSG);
+OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
+OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);
-- 
2.1.0



More information about the Linuxppc-dev mailing list