PASEMI: PA6T board doesn't boot with the RC1 of kernel 4.2 anymore
Denis Kirjanov
kda at linux-powerpc.org
Mon Jul 13 19:33:06 AEST 2015
On 7/13/15, Benjamin Herrenschmidt <benh at kernel.crashing.org> wrote:
> On Thu, 2015-07-09 at 12:52 +0300, Denis Kirjanov wrote:
>> On 7/9/15, Christian Zigotzky <chzigotzky at xenosoft.de> wrote:
>> > All
>> >
>> > I think you haven't received the SB600 patch yet. I have pasted it in
>> > this email directly. Thank you for your help. I am sorry because of
>> > this
>> > long patch but I hope you could help me a bit.
>>
>> But the first thing then is to upstream the sb600 patch...
>
> Well, the patch is gross ... That stuff needs to be mostly re-written,
> randomly ifdef'ing things around isn't going to fly. There are also
> some mentions of FW issues, can this be fixed in FW ?
A good question. Unfortunately, I don't have the PA6T (
>
> Ben.
>
>> >
>> > Thanks
>> >
>> > Christian
>> >
>> > ------------- nemo_4.1-3.patch -------------
>> >
>> > diff -rupN linux-4.1/arch/powerpc/kernel/head_64.S
>> > linux-4.1-nemo/arch/powerpc/kernel/head_64.S
>> > --- linux-4.1/arch/powerpc/kernel/head_64.S 2015-06-22
>> > 03:47:01.850778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/kernel/head_64.S 2015-06-22
>> > 03:27:29.590650112 +0200
>> > @@ -70,6 +70,13 @@ _GLOBAL(__start)
>> > /* NOP this out unconditionally */
>> > BEGIN_FTR_SECTION
>> > FIXUP_ENDIAN
>> > +/* Hack for PWRficient platforms: Due to CFE(?) bug, the 64-bit
>> > + * word at 0x8 needs to be set to 0. Patch it up here once we're
>> > + * done executing it (we can be lazy and avoid invalidating
>> > + * icache)
>> > + */
>> > +li r0,0
>> > +std 0,8(0)
>> > b __start_initialization_multiplatform
>> > END_FTR_SECTION(0, 1)
>> >
>> > diff -rupN linux-4.1/arch/powerpc/kernel/pci-common.c
>> > linux-4.1-nemo/arch/powerpc/kernel/pci-common.c
>> > --- linux-4.1/arch/powerpc/kernel/pci-common.c 2015-06-22
>> > 03:47:01.866778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/kernel/pci-common.c 2015-06-22
>> > 03:27:29.603650164 +0200
>> > @@ -721,6 +721,19 @@ void pci_process_bridge_OF_ranges(struct
>> > isa_io_base =
>> > (unsigned long)hose->io_base_virt;
>> > #endif /* CONFIG_PPC32 */
>> > +
>> > +
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + /* Workaround for lack of device tree. New for
>> > kernel 3.17: range.cpu_addr instead of cpu_addr and range.size instead
>> > of size Ch. Zigotzky */
>> > + if (primary) {
>> > + __ioremap_at(range.cpu_addr, (void
>> > *)ISA_IO_BASE,
>> > + range.size,
>> > _PAGE_NO_CACHE|_PAGE_GUARDED);
>> > + hose->io_base_virt = (void *)_IO_BASE;
>> > + /* _IO_BASE needs unsigned long long for the kernel
>> > 3.17
>> > Ch. Zigotzky */
>> > + printk("Initialised io_base_virt 0x%lx _IO_BASE
>> > 0x%llx\n", (unsigned long)hose->io_base_virt, (unsigned long
>> > long)_IO_BASE);
>> > + }
>> > +#endif
>> > +
>> > /* pci_io_size and io_base_phys always represent IO
>> > * space starting at 0 so we factor in pci_addr
>> > */
>> > @@ -1194,6 +1207,7 @@ static void pcibios_allocate_bus_resourc
>> > &ioport_resource : &iomem_resource;
>> > else {
>> > pr = pci_find_parent_resource(bus->self, res);
>> > +#ifndef CONFIG_PPC_PASEMI_SB600
>> > if (pr == res) {
>> > /* this happens when the generic PCI
>> > * code (wrongly) decides that this
>> > @@ -1201,6 +1215,7 @@ static void pcibios_allocate_bus_resourc
>> > */
>> > continue;
>> > }
>> > +#endif
>> > }
>> >
>> > pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
>> > @@ -1632,8 +1647,9 @@ void pcibios_scan_phb(struct pci_control
>> > pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node));
>> >
>> > /* Get some IO space for the new PHB */
>> > +#ifndef CONFIG_PPC_PASEMI_SB600
>> > pcibios_setup_phb_io_space(hose);
>> > -
>> > +#endif
>> > /* Wire up PHB bus resources */
>> > pcibios_setup_phb_resources(hose, &resources);
>> >
>> > diff -rupN linux-4.1/arch/powerpc/kernel/setup-common.c
>> > linux-4.1-nemo/arch/powerpc/kernel/setup-common.c
>> > --- linux-4.1/arch/powerpc/kernel/setup-common.c 2015-06-22
>> > 03:47:01.879778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/kernel/setup-common.c 2015-06-22
>> > 03:27:29.605650172 +0200
>> > @@ -76,7 +76,15 @@ EXPORT_SYMBOL(ppc_md);
>> > struct machdep_calls *machine_id;
>> > EXPORT_SYMBOL(machine_id);
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +/* FIXME!!
>> > + * Current PASemi code does not correctly update the value of
>> > boot_cpuid
>> > + * As a temporary fix we use the default 0, which is known to work
>> > + */
>> > +int boot_cpuid = 0;
>> > +#else
>> > int boot_cpuid = -1;
>> > +#endif
>> > EXPORT_SYMBOL_GPL(boot_cpuid);
>> >
>> > unsigned long klimit = (unsigned long) _end;
>> > diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/iommu.c
>> > linux-4.1-nemo/arch/powerpc/platforms/pasemi/iommu.c
>> > --- linux-4.1/arch/powerpc/platforms/pasemi/iommu.c 2015-06-22
>> > 03:47:02.018778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/iommu.c 2015-06-22
>> > 03:27:29.611650196 +0200
>> > @@ -1,3 +1,9 @@
>> > +/* This is a modified copy of
>> > +* usr/src/linux-2.6.39.4/arch/powerpc/platforms/pasemi/iommu.c
>> > +* The mod is on line 150
>> > +* By Len Karpowicz <twotat2z at embarqmail.com
>> > +*/
>> > +
>> > /*
>> > * Copyright (C) 2005-2008, PA Semi, Inc
>> > *
>> > @@ -143,8 +149,11 @@ static void iommu_table_iobmap_setup(voi
>> > iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT;
>> >
>> > /* it_size is in number of entries */
>> > - iommu_table_iobmap.it_size =
>> > - 0x80000000 >> iommu_table_iobmap.it_page_shift;
>> > +
>> > +/* Note: changed 0x80000000 to 0x7FFFFFFF for SBLive! SB0220 */
>> > +/* out of range problem on A-EON AmigaOne X1000 */
>> > + iommu_table_iobmap.it_size = 0x7FFFFFFF >> IOBMAP_PAGE_SHIFT;
>> > +
>> >
>> > /* Initialize the common IOMMU code */
>> > iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
>> > diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/Kconfig
>> > linux-4.1-nemo/arch/powerpc/platforms/pasemi/Kconfig
>> > --- linux-4.1/arch/powerpc/platforms/pasemi/Kconfig 2015-06-22
>> > 03:47:02.017778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/Kconfig 2015-06-22
>> > 03:27:29.620650232 +0200
>> > @@ -14,6 +14,13 @@ config PPC_PASEMI
>> > menu "PA Semi PWRficient options"
>> > depends on PPC_PASEMI
>> >
>> > +config PPC_PASEMI_SB600
>> > + bool "Nemo SB600 South Bridge Support"
>> > + depends on PPC_PASEMI
>> > + select PPC_I8259
>> > + help
>> > + Workarounds for the SB600 South Bridge.
>> > +
>> > config PPC_PASEMI_IOMMU
>> > bool "PA Semi IOMMU support"
>> > depends on PPC_PASEMI
>> > diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/pci.c
>> > linux-4.1-nemo/arch/powerpc/platforms/pasemi/pci.c
>> > --- linux-4.1/arch/powerpc/platforms/pasemi/pci.c 2015-06-22
>> > 03:47:02.019778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/pci.c 2015-06-22
>> > 03:27:29.621650236 +0200
>> > @@ -108,6 +108,69 @@ static int workaround_5945(struct pci_bu
>> > return 1;
>> > }
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +static int sb600_bus = 5;
>> > +static void __iomem *iob_mapbase = NULL;
>> > +
>> > +static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
>> > + int offset, int len, u32 *val);
>> > +
>> > +static void sb600_set_flag(int bus)
>> > +{
>> > + struct resource res;
>> > + struct device_node *dn;
>> > + struct pci_bus *busp;
>> > + u32 val;
>> > + int err;
>> > +
>> > + if (sb600_bus == -1)
>> > + {
>> > + busp = pci_find_bus(0, 0);
>> > + pa_pxp_read_config(busp, PCI_DEVFN(17,0),
>> > PCI_SECONDARY_BUS, 1, &val);
>> > +
>> > + sb600_bus = val;
>> > +
>> > + printk(KERN_CRIT "NEMO SB600 on bus %d.\n",sb600_bus);
>> > + }
>> > +
>> > + if (iob_mapbase == NULL)
>> > + {
>> > + dn = of_find_compatible_node(NULL, "io-bridge",
>> > "pasemi,1682m-iob");
>> > + if (!dn)
>> > + {
>> > + printk(KERN_CRIT "NEMO SB600 missing iob node\n");
>> > + return;
>> > + }
>> > +
>> > + err = of_address_to_resource(dn, 0, &res);
>> > + of_node_put(dn);
>> > +
>> > + if (err)
>> > + {
>> > + printk(KERN_CRIT "NEMO SB600 missing resource\n");
>> > + return;
>> > + }
>> > +
>> > + printk(KERN_CRIT "NEMO SB600 IOB base
>> > %08lx\n",res.start);
>> > +
>> > + iob_mapbase = ioremap(res.start + 0x100, 0x94);
>> > + }
>> > +
>> > + if (iob_mapbase != NULL)
>> > + {
>> > + if (bus == sb600_bus)
>> > + {
>> > + out_le32(iob_mapbase + 4, in_le32(iob_mapbase +
>> > 4) | 0x800);
>> > + }
>> > + else
>> > + {
>> > + out_le32(iob_mapbase + 4, in_le32(iob_mapbase +
>> > 4) & ~0x800);
>> > + }
>> > + }
>> > +}
>> > +#endif
>> > +
>> > +
>> > static int pa_pxp_read_config(struct pci_bus *bus, unsigned int
>> > devfn,
>> > int offset, int len, u32 *val)
>> > {
>> > @@ -126,6 +189,10 @@ static int pa_pxp_read_config(struct pci
>> >
>> > addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + sb600_set_flag(bus->number);
>> > +#endif
>> > +
>> > /*
>> > * Note: the caller has already checked that offset is
>> > * suitably aligned and that len is 1, 2 or 4.
>> > diff -rupN linux-4.1/arch/powerpc/platforms/pasemi/setup.c
>> > linux-4.1-nemo/arch/powerpc/platforms/pasemi/setup.c
>> > --- linux-4.1/arch/powerpc/platforms/pasemi/setup.c 2015-06-22
>> > 03:47:02.019778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/platforms/pasemi/setup.c 2015-06-22
>> > 03:27:29.623650244 +0200
>> > @@ -34,6 +34,7 @@
>> > #include <asm/prom.h>
>> > #include <asm/iommu.h>
>> > #include <asm/machdep.h>
>> > +#include <asm/i8259.h>
>> > #include <asm/mpic.h>
>> > #include <asm/smp.h>
>> > #include <asm/time.h>
>> > @@ -72,6 +73,17 @@ static void pas_restart(char *cmd)
>> > out_le32(reset_reg, 0x6000000);
>> > }
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +void pas_shutdown(void)
>> > +{
>> > + /* (added by DStevens 19/06/13)
>> > + Set the PLD bit that makes the SB600 think the power button
>> > is being pressed */
>> > + void __iomem *pld_map = ioremap(0xf5000000,4096);
>> > + while (1)
>> > + out_8(pld_map+7,0x01);
>> > +}
>> > +#endif
>> > +
>> > #ifdef CONFIG_SMP
>> > static arch_spinlock_t timebase_lock;
>> > static unsigned long timebase;
>> > @@ -183,6 +195,55 @@ static int __init pas_setup_mce_regs(voi
>> > }
>> > machine_device_initcall(pasemi, pas_setup_mce_regs);
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +static unsigned sb600_irq_to_vector(int irq)
>> > +{
>> > + switch(irq) {
>> > + case 3: return 216;
>> > + case 4: return 217;
>> > + case 5: return 218;
>> > + case 6: return 219;
>> > + case 7: return 220;
>> > + case 8: return 222;
>> > + case 9: return 212;
>> > + case 10: return 213;
>> > + case 11: return 214;
>> > + case 12: return 215;
>> > + case 14: return 221;
>> > + default: return 0;
>> > + }
>> > +}
>> > +
>> > +static void sb600_8259_cascade(unsigned int irq, struct irq_data
>> > *desc)
>> > +{
>> > + unsigned int cascade_irq = i8259_irq();
>> > + unsigned vector = sb600_irq_to_vector(cascade_irq);
>> > + if (vector > 0)
>> > + generic_handle_irq(vector);
>> > + outb(0x20, 0xA0); /* Non-specific EOI */
>> > + outb(0x20, 0x20); /* Non-specific EOI to cascade */
>> > + desc->chip->irq_eoi(desc);
>> > +}
>> > +extern void i8259_unmask_irq(struct irq_data *d);
>> > +
>> > +__init void sb600_8259_init(void)
>> > +{
>> > + int gpio_virq;
>> > +
>> > + // Connect legacy i8259 controller in SB600
>> > + printk("Init i8259\n");
>> > + i8259_init(NULL, 0);
>> > +
>> > + gpio_virq = irq_create_mapping(NULL, 3);
>> > + irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
>> > + irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
>> > + mpic_unmask_irq(irq_get_irq_data(gpio_virq));
>> > +
>> > + // Initial mapping for RTC
>> > + irq_create_mapping(NULL, 222);
>> > +}
>> > +#endif
>> > +
>> > static __init void pas_init_IRQ(void)
>> > {
>> > struct device_node *np;
>> > @@ -246,6 +307,12 @@ static __init void pas_init_IRQ(void)
>> >
>> > of_node_put(mpic_node);
>> > of_node_put(root);
>> > +
>> > +
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + sb600_8259_init();
>> > +#endif
>> > +
>> > }
>> >
>> > static void __init pas_progress(char *s, unsigned short hex)
>> > @@ -403,12 +470,39 @@ static const struct of_device_id pasemi_
>> > {},
>> > };
>> >
>> > -static int __init pasemi_publish_devices(void)
>> > -{
>> > - pasemi_pcmcia_init();
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +
>> > +/*
>> > + This should come from OF tree. See sysdev/rtc_cmos_setup for details.
>> > Need to get i8259 supported correctly first, so that
>> > + as the standard support hard-codes IRQ 8.
>> > + */
>> > +
>> > +
>> > +static struct resource rtc_resource[] = {{
>> > + .name = "rtc",
>> > + .start = 0x70,
>> > + .end = 0x71,
>> > + .flags = IORESOURCE_IO,
>> > +}, {
>> > + .name = "rtc",
>> > + .start = 222,
>> > + .end = 222,
>> > + .flags = IORESOURCE_IRQ,
>> > +}};
>> > +
>> > +#endif
>> > +
>> > +
>> > + static int __init pasemi_publish_devices(void)
>> > + {
>> > + pasemi_pcmcia_init();
>> > +
>> > + /* Publish OF platform devices for SDC and other non-PCI
>> > devices */
>> > + of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
>> >
>> > - /* Publish OF platform devices for SDC and other non-PCI devices
>> > */
>> > - of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + platform_device_register_simple("rtc_cmos", -1, rtc_resource,
>> > 2);
>> > +#endif
>> >
>> > return 0;
>> > }
>> > @@ -430,9 +524,20 @@ static int __init pas_probe(void)
>> >
>> > alloc_iobmap_l2();
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + pm_power_off = pas_shutdown; // Varisys
>> > provided a way to turn us off
>> > +#endif
>> > return 1;
>> > }
>> >
>> > +
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +static int sb600_pci_probe_mode(struct pci_bus *bus)
>> > +{
>> > + return PCI_PROBE_DEVTREE;
>> > +}
>> > +#endif
>> > +
>> > define_machine(pasemi) {
>> > .name = "PA Semi PWRficient",
>> > .probe = pas_probe,
>> > @@ -445,4 +550,7 @@ define_machine(pasemi) {
>> > .calibrate_decr = generic_calibrate_decr,
>> > .progress = pas_progress,
>> > .machine_check_exception = pas_machine_check_handler,
>> > +#if 0 // def CONFIG_PPC_PASEMI_SB600
>> > + .pci_probe_mode = sb600_pci_probe_mode,
>> > +#endif
>> > };
>> > diff -rupN linux-4.1/arch/powerpc/sysdev/i8259.c
>> > linux-4.1-nemo/arch/powerpc/sysdev/i8259.c
>> > --- linux-4.1/arch/powerpc/sysdev/i8259.c 2015-06-22
>> > 03:47:02.064778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/sysdev/i8259.c 2015-06-22
>> > 03:27:29.631650275 +0200
>> > @@ -103,11 +103,11 @@ static void i8259_set_irq_mask(int irq_n
>> > outb(cached_21,0x21);
>> > }
>> >
>> > -static void i8259_mask_irq(struct irq_data *d)
>> > +void i8259_mask_irq(struct irq_data *d)
>> > {
>> > unsigned long flags;
>> >
>> > - pr_debug("i8259_mask_irq(%d)\n", d->irq);
>> > + printk("i8259_mask_irq(%d)\n", d->irq);
>> >
>> > raw_spin_lock_irqsave(&i8259_lock, flags);
>> > if (d->irq < 8)
>> > @@ -118,11 +118,11 @@ static void i8259_mask_irq(struct irq_da
>> > raw_spin_unlock_irqrestore(&i8259_lock, flags);
>> > }
>> >
>> > -static void i8259_unmask_irq(struct irq_data *d)
>> > +void i8259_unmask_irq(struct irq_data *d)
>> > {
>> > unsigned long flags;
>> >
>> > - pr_debug("i8259_unmask_irq(%d)\n", d->irq);
>> > + printk("i8259_unmask_irq(%d)\n", d->irq);
>> >
>> > raw_spin_lock_irqsave(&i8259_lock, flags);
>> > if (d->irq < 8)
>> > @@ -229,6 +229,8 @@ void i8259_init(struct device_node *node
>> > /* initialize the controller */
>> > raw_spin_lock_irqsave(&i8259_lock, flags);
>> >
>> > + printk("About to write to i8259\n");
>> > +
>> > /* Mask all first */
>> > outb(0xff, 0xA1);
>> > outb(0xff, 0x21);
>> > @@ -259,8 +261,12 @@ void i8259_init(struct device_node *node
>> > outb(cached_A1, 0xA1);
>> > outb(cached_21, 0x21);
>> >
>> > + printk("Done write to i8259\n");
>> > +
>> > raw_spin_unlock_irqrestore(&i8259_lock, flags);
>> >
>> > +#ifndef CONFIG_PPC_PASEMI_SB600
>> > +
>> > /* create a legacy host */
>> > i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops,
>> > NULL);
>> > if (i8259_host == NULL) {
>> > @@ -268,6 +274,8 @@ void i8259_init(struct device_node *node
>> > return;
>> > }
>> >
>> > +#endif
>> > +
>> > /* reserve our resources */
>> > /* XXX should we continue doing that ? it seems to cause problems
>> > * with further requesting of PCI IO resources for that range...
>> > diff -rupN linux-4.1/arch/powerpc/sysdev/mpic.c
>> > linux-4.1-nemo/arch/powerpc/sysdev/mpic.c
>> > --- linux-4.1/arch/powerpc/sysdev/mpic.c 2015-06-22
>> > 03:47:02.067778538 +0200
>> > +++ linux-4.1-nemo/arch/powerpc/sysdev/mpic.c 2015-06-22
>> > 03:27:29.634650287 +0200
>> > @@ -661,6 +661,56 @@ static inline void mpic_eoi(struct mpic
>> > * Linux descriptor level callbacks
>> > */
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > +
>> > +static int sb600_vector_to_irq(unsigned vector)
>> > +{
>> > + switch(vector) {
>> > + case 212: return 9;
>> > + case 213: return 10;
>> > + case 214: return 11;
>> > + case 215: return 12;
>> > + case 216: return 3;
>> > + case 217: return 4;
>> > + case 218: return 5;
>> > + case 219: return 6;
>> > + case 220: return 7;
>> > + case 221: return 14;
>> > + case 222: return 8;
>> > + default: return -1;
>> > + }
>> > +}
>> > +
>> > +extern void i8259_mask_irq(struct irq_data *d);
>> > +extern void i8259_unmask_irq(struct irq_data *d);
>> > +
>> > +int sb600_unmask_irq(unsigned irq)
>> > +{
>> > + int vector = sb600_vector_to_irq(irq);
>> > + if (vector >= 0) {
>> > + i8259_unmask_irq(irq_get_irq_data(vector));
>> > + return 1;
>> > + } else
>> > + return 0;
>> > +}
>> > +
>> > +int sb600_mask_irq(unsigned irq)
>> > +{
>> > + int vector = sb600_vector_to_irq(irq);
>> > + if (vector >= 0) {
>> > + i8259_mask_irq(irq_get_irq_data(vector));
>> > + return 1;
>> > + } else
>> > + return 0;
>> > +}
>> > +
>> > +int sb600_end_irq(unsigned irq)
>> > +{
>> > + int vector = sb600_vector_to_irq(irq);
>> > + return (vector >= 0);
>> > +}
>> > +
>> > +#endif
>> >
>> > void mpic_unmask_irq(struct irq_data *d)
>> > {
>> > @@ -668,7 +718,12 @@ void mpic_unmask_irq(struct irq_data *d)
>> > struct mpic *mpic = mpic_from_irq_data(d);
>> > unsigned int src = irqd_to_hwirq(d);
>> >
>> > - DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, d->irq,
>> > src);
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + if (sb600_unmask_irq(src))
>> > + return;
>> > +#endif
>> > +
>> > + DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq,
>> > src);
>> >
>> > mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
>> > mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) &
>> > @@ -689,7 +744,12 @@ void mpic_mask_irq(struct irq_data *d)
>> > struct mpic *mpic = mpic_from_irq_data(d);
>> > unsigned int src = irqd_to_hwirq(d);
>> >
>> > - DBG("%s: disable_irq: %d (src %d)\n", mpic->name, d->irq, src);
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + if (sb600_mask_irq(src))
>> > + return;
>> > +#endif
>> > +
>> > + DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
>> >
>> > mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
>> > mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) |
>> > @@ -709,6 +769,14 @@ void mpic_end_irq(struct irq_data *d)
>> > {
>> > struct mpic *mpic = mpic_from_irq_data(d);
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + unsigned int src = irqd_to_hwirq(d);
>> > +
>> > + if (src >= 212 && src <= 222)
>> > + return;
>> > +#endif
>> > +
>> > +
>> > #ifdef DEBUG_IRQ
>> > DBG("%s: end_irq: %d\n", mpic->name, d->irq);
>> > #endif
>> > diff -rupN linux-4.1/drivers/ata/libata-sff.c
>> > linux-4.1-nemo/drivers/ata/libata-sff.c
>> > --- linux-4.1/drivers/ata/libata-sff.c 2015-06-22 03:47:03.376778537
>> > +0200
>> > +++ linux-4.1-nemo/drivers/ata/libata-sff.c 2015-06-22
>> > 03:27:29.646650335 +0200
>> > @@ -2438,9 +2438,9 @@ int ata_pci_sff_activate_host(struct ata
>> > if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
>> > u8 tmp8, mask;
>> >
>> > - /* TODO: What if one channel is in native mode ... */
>> > + /* Don't look at dummy ports in the mask */
>> > pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
>> > - mask = (1 << 2) | (1 << 0);
>> > + mask = (! ata_port_is_dummy(host->ports[1]) << 2) | (!
>> > ata_port_is_dummy(host->ports[0]) << 0);
>> > if ((tmp8 & mask) != mask)
>> > legacy_mode = 1;
>> > }
>> > diff -rupN linux-4.1/drivers/ata/pata_atiixp.c
>> > linux-4.1-nemo/drivers/ata/pata_atiixp.c
>> > --- linux-4.1/drivers/ata/pata_atiixp.c 2015-06-22
>> > 03:47:03.384778537
>> > +0200
>> > +++ linux-4.1-nemo/drivers/ata/pata_atiixp.c 2015-06-22
>> > 03:27:29.649650347 +0200
>> > @@ -278,6 +278,11 @@ static int atiixp_init_one(struct pci_de
>> > };
>> > const struct ata_port_info *ppi[] = { &info, &info };
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + // Second port not wired on SB600, and config bit cannot be set
>> > by BIOS
>> > + ppi[1] = &ata_dummy_port_info;
>> > +#endif
>> > +
>> > return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
>> > ATA_HOST_PARALLEL_SCAN);
>> > }
>> > diff -rupN linux-4.1/drivers/ata/pata_of_platform.c
>> > linux-4.1-nemo/drivers/ata/pata_of_platform.c
>> > --- linux-4.1/drivers/ata/pata_of_platform.c 2015-06-22
>> > 03:47:03.400778537 +0200
>> > +++ linux-4.1-nemo/drivers/ata/pata_of_platform.c 2015-06-22
>> > 03:27:29.653650363 +0200
>> > @@ -41,14 +41,36 @@ static int pata_of_platform_probe(struct
>> > return -EINVAL;
>> > }
>> >
>> > - ret = of_address_to_resource(dn, 1, &ctl_res);
>> > - if (ret) {
>> > - dev_err(&ofdev->dev, "can't get CTL address from "
>> > - "device tree\n");
>> > - return -EINVAL;
>> > + if (of_device_is_compatible(dn, "electra-ide")) {
>> > + /* Altstatus is really at offset 0x3f6 from the primary window
>> > + * on electra-ide. Adjust ctl_res and io_res accordingly.
>> > + */
>> > + ctl_res = io_res;
>> > + ctl_res.start = ctl_res.start+0x3f6;
>> > + io_res.end = ctl_res.start-1;
>> > +
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + } else if (of_device_is_compatible(dn, "electra-cf")) {
>> > + /* Task regs are at 0x800, with alt status @ 0x80e in
>> > the primary window
>> > + * on electra-cf. Adjust ctl_res and io_res
>> > accordingly.
>> > + */
>> > + ctl_res = io_res;
>> > + io_res.start += 0x800;
>> > + ctl_res.start = ctl_res.start + 0x80e;
>> > + io_res.end = ctl_res.start-1;
>> > +#endif
>> > + } else {
>> > + ret = of_address_to_resource(dn, 1, &ctl_res);
>> > + if (ret) {
>> > + dev_err(&ofdev->dev, "can't get CTL address from "
>> > + "device tree\n");
>> > + return -EINVAL;
>> > + }
>> > }
>> >
>> > irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
>> > + if (irq_res)
>> > + irq_res->flags = 0;
>> >
>> > prop = of_get_property(dn, "reg-shift", NULL);
>> > if (prop)
>> > @@ -65,6 +87,11 @@ static int pata_of_platform_probe(struct
>> > dev_info(&ofdev->dev, "pio-mode unspecified, assuming
>> > PIO0\n");
>> > }
>> >
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + irq_res = 0; // force irq off (doesn't seem
>> > to work)
>> > +#endif
>> > +
>> > +
>> > pio_mask = 1 << pio_mode;
>> > pio_mask |= (1 << pio_mode) - 1;
>> >
>> > @@ -74,7 +101,11 @@ static int pata_of_platform_probe(struct
>> >
>> > static struct of_device_id pata_of_platform_match[] = {
>> > { .compatible = "ata-generic", },
>> > - { },
>> > + { .compatible = "electra-ide", },
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + { .compatible = "electra-cf",},
>> > +#endif
>> > + {},
>> > };
>> > MODULE_DEVICE_TABLE(of, pata_of_platform_match);
>> >
>> > diff -rupN linux-4.1/drivers/gpu/drm/radeon/radeon_pm.c
>> > linux-4.1-nemo/drivers/gpu/drm/radeon/radeon_pm.c
>> > --- linux-4.1/drivers/gpu/drm/radeon/radeon_pm.c 2015-06-22
>> > 03:47:04.600778536 +0200
>> > +++ linux-4.1-nemo/drivers/gpu/drm/radeon/radeon_pm.c 2015-06-22
>> > 03:27:29.675650448 +0200
>> > @@ -226,7 +226,10 @@ static void radeon_set_power_state(struc
>> > /* set memory clock */
>> > if (rdev->asic->pm.set_memory_clock && (mclk !=
>> > rdev->pm.current_mclk)) {
>> > radeon_pm_debug_check_in_vbl(rdev, false);
>> > + /* D.Stevens 2012 for the A-EON AmigaOne X1000: Setting
>> > memory clock only works on CAICOS and 6570, don't set for anything else
>> > (We ignore 6570 here */
>> > + if (rdev->family == CHIP_CAICOS) {
>> > radeon_set_memory_clock(rdev, mclk);
>> > + }
>> > radeon_pm_debug_check_in_vbl(rdev, true);
>> > rdev->pm.current_mclk = mclk;
>> > DRM_DEBUG_DRIVER("Setting: m: %d\n", mclk);
>> > @@ -1220,7 +1223,7 @@ static void radeon_pm_resume_old(struct
>> > SET_VOLTAGE_TYPE_ASIC_VDDCI);
>> > if (rdev->pm.default_sclk)
>> > radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
>> > - if (rdev->pm.default_mclk)
>> > + if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))
>> > /* Fix for PPC systems HD6000 >6570 by A-EON Core Linux Support Team */
>> > radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
>> > }
>> > /* asic init will reset the default power state */
>> > @@ -1271,7 +1274,7 @@ dpm_resume_fail:
>> > SET_VOLTAGE_TYPE_ASIC_VDDCI);
>> > if (rdev->pm.default_sclk)
>> > radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
>> > - if (rdev->pm.default_mclk)
>> > + if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))
>> > /* Fix for PPC & > HD6570 by A-EON Linux Core Support Team */
>> > radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
>> > }
>> > }
>> > @@ -1318,7 +1321,7 @@ static int radeon_pm_init_old(struct rad
>> > SET_VOLTAGE_TYPE_ASIC_VDDCI);
>> > if (rdev->pm.default_sclk)
>> > radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
>> > - if (rdev->pm.default_mclk)
>> > + if (rdev->pm.default_mclk && (rdev->family ==
>> > CHIP_CAICOS)) // D.Stevens 2013: fix for >HD6570 on PPC
>> > radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
>> > }
>> > }
>> > @@ -1431,7 +1434,7 @@ dpm_failed:
>> > SET_VOLTAGE_TYPE_ASIC_VDDCI);
>> > if (rdev->pm.default_sclk)
>> > radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
>> > - if (rdev->pm.default_mclk)
>> > + if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS))
>> > //
>> > D.Stevens 2013: Fix for >HD6570 on ppc
>> > radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
>> > }
>> > DRM_ERROR("radeon: dpm initialization failed\n");
>> > diff -rupN linux-4.1/drivers/pci/pci.c linux-4.1-nemo/drivers/pci/pci.c
>> > --- linux-4.1/drivers/pci/pci.c 2015-06-22 03:47:08.817778536 +0200
>> > +++ linux-4.1-nemo/drivers/pci/pci.c 2015-06-22 03:27:29.717650601
>> > +0200
>> > @@ -421,7 +421,16 @@ struct resource *pci_find_parent_resourc
>> > pci_bus_for_each_resource(bus, r, i) {
>> > if (!r)
>> > continue;
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + /* The new code here checks for resources that are not allocated,
>> > and no longer
>> > + * returns these, however the SB600 code uses this feature to
>> > allocate IO ranges
>> > + * in the ISA map, and this breaks booting on the AmigaOneX1000.
>> > + * Temporary fix to get the kernel working, remove the resource
>> > allocated check.
>> > + */
>> > + if (resource_contains(r, res)) {
>> > +#else
>> > if (res->start && resource_contains(r, res)) {
>> > +#endif
>> >
>> > /*
>> > * If the window is prefetchable but the BAR is
>> > diff -rupN linux-4.1/drivers/pci/probe.c
>> > linux-4.1-nemo/drivers/pci/probe.c
>> > --- linux-4.1/drivers/pci/probe.c 2015-06-22 03:47:08.824778536
>> > +0200
>> > +++ linux-4.1-nemo/drivers/pci/probe.c 2015-06-22 03:27:29.720650613
>> > +0200
>> > @@ -363,7 +363,11 @@ static void pci_read_bridge_io(struct pc
>> > limit |= ((unsigned long) io_limit_hi << 16);
>> > }
>> >
>> > - if (base <= limit) {
>> > + if (base <= limit
>> > + #ifdef CONFIG_PPC_PASEMI_SB600
>> > + || child->busn_res.start == 5
>> > + #endif
>> > + ) {
>> > res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) |
>> > IORESOURCE_IO;
>> > region.start = base;
>> > region.end = limit + io_granularity - 1;
>> > @@ -1609,11 +1613,14 @@ static int only_one_child(struct pci_bus
>> >
>> > if (!parent || !pci_is_pcie(parent))
>> > return 0;
>> > + #ifndef CONFIG_PPC_PASEMI_SB600
>> > + // SB600 has non-zero devices on non-root bus.
>> > if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
>> > return 1;
>> > if (pci_pcie_type(parent) == PCI_EXP_TYPE_DOWNSTREAM &&
>> > !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
>> > return 1;
>> > + #endif
>> > return 0;
>> > }
>> >
>> > diff -rupN linux-4.1/drivers/rtc/rtc-cmos.c
>> > linux-4.1-nemo/drivers/rtc/rtc-cmos.c
>> > --- linux-4.1/drivers/rtc/rtc-cmos.c 2015-06-22 03:47:09.156778536
>> > +0200
>> > +++ linux-4.1-nemo/drivers/rtc/rtc-cmos.c 2015-06-22
>> > 03:27:29.742650701 +0200
>> > @@ -242,6 +242,13 @@ static int cmos_read_alarm(struct device
>> > }
>> >
>> > rtc_control = CMOS_READ(RTC_CONTROL);
>> > +
>> > +#ifdef CONFIG_PPC_PASEMI_SB600
>> > + // Nemo BIOS does not init RTC
>> > + rtc_control = rtc_control | RTC_24H;
>> > + CMOS_WRITE(rtc_control, RTC_CONTROL);
>> > +#endif
>> > +
>> > spin_unlock_irq(&rtc_lock);
>> >
>> > if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
>> > diff -rupN linux-4.1/sound/pci/hda/patch_sigmatel.c
>> > linux-4.1-nemo/sound/pci/hda/patch_sigmatel.c
>> > --- linux-4.1/sound/pci/hda/patch_sigmatel.c 2015-06-22
>> > 03:47:15.039778536 +0200
>> > +++ linux-4.1-nemo/sound/pci/hda/patch_sigmatel.c 2015-06-22
>> > 03:27:29.768650804 +0200
>> > @@ -166,6 +166,7 @@ enum {
>> > STAC_D965_VERBS,
>> > STAC_DELL_3ST,
>> > STAC_DELL_BIOS,
>> > + STAC_NEMO_DEFAULT,
>> > STAC_DELL_BIOS_AMIC,
>> > STAC_DELL_BIOS_SPDIF,
>> > STAC_927X_DELL_DMIC,
>> > @@ -1359,6 +1360,23 @@ static const struct hda_pintbl oqo9200_p
>> > {}
>> > };
>> >
>> > +static const struct hda_pintbl nemo_pin_configs[] = {
>> > + { 0x0a, 0x02214020 },
>> > + { 0x0b, 0x02A19080 },
>> > + { 0x0c, 0x0181304E },
>> > + { 0x0d, 0x01014010 },
>> > + { 0x0e, 0x01A19040 },
>> > + { 0x0f, 0x01011012 },
>> > + { 0x10, 0x01016011 },
>> > + { 0x11, 0x01012014 },
>> > + { 0x12, 0x103301F0 },
>> > + { 0x13, 0x00000000 },
>> > + { 0x14, 0x00000000 },
>> > + { 0x21, 0x01442170 },
>> > + { 0x22, 0x00000000 },
>> > + { 0x23, 0x00000000 },
>> > + {}
>> > +};
>> >
>> > static void stac9200_fixup_panasonic(struct hda_codec *codec,
>> > const struct hda_fixup *fix, int action)
>> > @@ -3868,6 +3886,10 @@ static const struct hda_fixup stac927x_f
>> > .type = HDA_FIXUP_PINS,
>> > .v.pins = d965_5st_no_fp_pin_configs,
>> > },
>> > + [STAC_NEMO_DEFAULT] = {
>> > + .type = HDA_FIXUP_PINS,
>> > + .v.pins = nemo_pin_configs,
>> > + },
>> > [STAC_DELL_3ST] = {
>> > .type = HDA_FIXUP_PINS,
>> > .v.pins = dell_3st_pin_configs,
>> > @@ -3924,6 +3946,7 @@ static const struct hda_model_fixup stac
>> > { .id = STAC_D965_5ST_NO_FP, .name = "5stack-no-fp" },
>> > { .id = STAC_DELL_3ST, .name = "dell-3stack" },
>> > { .id = STAC_DELL_BIOS, .name = "dell-bios" },
>> > + { .id = STAC_NEMO_DEFAULT, .name = "nemo-default" },
>> > { .id = STAC_DELL_BIOS_AMIC, .name = "dell-bios-amic" },
>> > { .id = STAC_927X_VOLKNOB, .name = "volknob" },
>> > {}
>> > @@ -3962,6 +3985,8 @@ static const struct snd_pci_quirk stac92
>> > "Intel D965", STAC_D965_5ST),
>> > SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
>> > "Intel D965", STAC_D965_5ST),
>> > + /* Nemo */
>> > + SND_PCI_QUIRK(0x1888, 0x1000, "AmigaOne X1000",
>> > STAC_NEMO_DEFAULT),
>> > /* volume-knob fixes */
>> > SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
>> > {} /* terminator */
>> > @@ -5035,6 +5060,7 @@ static const struct hda_codec_preset snd
>> > { .id = 0x83847683, .name = "STAC9221D A2", .patch =
>> > patch_stac922x },
>> > { .id = 0x83847618, .name = "STAC9227", .patch = patch_stac927x
>> > },
>> > { .id = 0x83847619, .name = "STAC9227", .patch = patch_stac927x
>> > },
>> > + { .id = 0x83847638, .name = "STAC92HD700", .patch = patch_stac927x
>> > },
>> > { .id = 0x83847616, .name = "STAC9228", .patch = patch_stac927x
>> > },
>> > { .id = 0x83847617, .name = "STAC9228", .patch = patch_stac927x
>> > },
>> > { .id = 0x83847614, .name = "STAC9229", .patch = patch_stac927x
>> > },
>> > _______________________________________________
>> > Linuxppc-dev mailing list
>> > Linuxppc-dev at lists.ozlabs.org
>> > https://lists.ozlabs.org/listinfo/linuxppc-dev
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>
>
More information about the Linuxppc-dev
mailing list