[PATCH SLOF v3 5/5] disk-label: add support for booting from GPT FAT partition
Thomas Huth
thuth at redhat.com
Wed Jul 1 04:57:45 AEST 2015
On Tue, 30 Jun 2015 17:54:14 +0530
Nikunj A Dadhania <nikunj at linux.vnet.ibm.com> wrote:
>
> disk-label: add support for booting from GPT FAT partition
>
> For a GPT+LVM combination disk, older bootloader that does not support
> LVM, cannot load kernel from LVM.
>
> The patch adds support to read from BASIC_DATA UUID partitions for the
> case that the OS installer has installed the CHRP-BOOT config on a FAT
> file system.
>
> Makes GPT detection robust
> * Fix bug in seek-pos updation code
> * Check for Protective MBR Magic
> * Check for valid GPT Signature
> * Boundary check for allocated block size before reading into the
> buffer
>
> Signed-off-by: Nikunj A Dadhania <nikunj at linux.vnet.ibm.com>
>
> diff --git a/slof/fs/packages/disk-label.fs b/slof/fs/packages/disk-label.fs
> index 347dc5d..fa5df27 100644
> --- a/slof/fs/packages/disk-label.fs
> +++ b/slof/fs/packages/disk-label.fs
> @@ -179,7 +179,8 @@ CONSTANT /gpt-part-entry
> \ This word returns true if the currently loaded disk-buf has _NO_ GPT partition id
> : no-gpt? ( -- true|false )
> 0 read-disk-buf
> - 1 partition>part-entry part-entry>id c@ ee <>
> + 1 partition>part-entry part-entry>id c@ ee <> IF true EXIT THEN
> + disk-buf mbr>magic w at -le aa55 <>
> ;
>
> : pc-extended-partition? ( part-entry-addr -- true|false )
> @@ -267,7 +268,10 @@ CONSTANT /gpt-part-entry
>
> : try-dos-partition ( -- okay? )
> \ Read partition table and check magic.
> - no-mbr? IF cr ." No DOS disk-label found." cr false EXIT THEN
> + no-mbr? IF
> + debug-disk-label? IF cr ." No DOS disk-label found." cr THEN
> + false EXIT
> + THEN
>
> count-dos-logical-partitions TO dos-logical-partitions
>
> @@ -377,31 +381,85 @@ AA268B49521E5A8B CONSTANT GPT-PREP-PARTITION-4
> 8 + x@ GPT-PREP-PARTITION-4 =
> ;
>
> -: load-from-gpt-prep-partition ( addr -- size )
> - no-gpt? IF drop false EXIT THEN
> - debug-disk-label? IF
> - cr ." GPT partition found " cr
> - THEN
> - 1 read-disk-buf disk-buf gpt>part-entry-lba l at -le
> +\ Check for GPT MSFT BASIC DATA GUID - fat based
> +EBD0A0A2 CONSTANT GPT-BASIC-DATA-PARTITION-1
> +B9E5 CONSTANT GPT-BASIC-DATA-PARTITION-2
> +4433 CONSTANT GPT-BASIC-DATA-PARTITION-3
> +87C068B6B72699C7 CONSTANT GPT-BASIC-DATA-PARTITION-4
> +
> +: gpt-basic-data-partition? ( -- true|false )
> + disk-buf gpt-part-entry>part-type-guid
> + dup l at -le GPT-BASIC-DATA-PARTITION-1 <> IF drop false EXIT THEN
> + dup 4 + w at -le GPT-BASIC-DATA-PARTITION-2 <> IF drop false EXIT THEN
> + dup 6 + w at -le GPT-BASIC-DATA-PARTITION-3 <> IF drop false EXIT THEN
> + 8 + x@ GPT-BASIC-DATA-PARTITION-4 =
> +;
> +
> +\
> +\ GPT Signature
> +\ ("EFI PART", 45h 46h 49h 20h 50h 41h 52h 54h)
> +\
> +4546492050415254 CONSTANT GPT-SIGNATURE
> +
> +\ The routine checks whether the protective MBR has GPT ID and then
> +\ reads the gpt data from the sector. Also set the seek position and
> +\ the partition size used in caller routines.
> +
> +: get-gpt-partition ( -- true|false )
> + no-gpt? IF false EXIT THEN
> + debug-disk-label? IF cr ." GPT partition found " cr THEN
> + 1 read-disk-buf
> + disk-buf gpt>part-entry-lba x at -le
> block-size * to seek-pos
> disk-buf gpt>part-entry-size l at -le to gpt-part-size
> - disk-buf gpt>num-part-entry l at -le dup 0= IF false EXIT THEN
> + gpt-part-size disk-buf-size > IF
> + cr ." GPT part size exceeds buffer allocated " cr
> + false exit
> + THEN
> + disk-buf gpt>signature x@ GPT-SIGNATURE =
> +;
> +
> +: load-from-gpt-prep-partition ( addr -- size )
> + get-gpt-partition 0= IF false EXIT THEN
> + disk-buf gpt>num-part-entry l at -le dup 0= IF false exit THEN
> 1+ 1 ?DO
> seek-pos 0 seek drop
> disk-buf gpt-part-size read drop gpt-prep-partition? IF
> - debug-disk-label? IF
> - ." GPT PReP partition found " cr
> - THEN
> - disk-buf gpt-part-entry>first-lba x at -le
> - disk-buf gpt-part-entry>last-lba x at -le
> - over - 1+ ( addr offset len )
> - swap ( addr len offset )
> - block-size * to part-offset
> - 0 0 seek drop ( addr len )
> - block-size * read ( size )
> + debug-disk-label? IF ." GPT PReP partition found " cr THEN
> + disk-buf gpt-part-entry>first-lba x at -le ( addr first-lba )
> + disk-buf gpt-part-entry>last-lba x at -le ( addr first-lba last-lba)
> + over - 1+ ( addr first-lba blocks )
> + swap ( addr blocks first-lba )
> + block-size * to part-offset ( addr blocks )
> + 0 0 seek drop ( addr blocks )
> + block-size * read ( size )
> + UNLOOP EXIT
> + THEN
> + seek-pos gpt-part-size + to seek-pos
> + LOOP
> + false
> +;
> +
> +: try-gpt-dos-partition ( -- true|false )
> + get-gpt-partition 0= IF false EXIT THEN
> + disk-buf gpt>num-part-entry l at -le dup 0= IF false EXIT THEN
> + 1+ 1 ?DO
> + seek-pos 0 seek drop
> + disk-buf gpt-part-size read drop
> + gpt-basic-data-partition? IF
> + debug-disk-label? IF ." GPT BASIC DATA partition found " cr THEN
> + disk-buf gpt-part-entry>first-lba x at -le ( first-lba )
> + dup to part-start ( first-lba )
> + disk-buf gpt-part-entry>last-lba x at -le ( first-lba last-lba )
> + over - 1+ ( first-lba s1 )
> + block-size * to part-size ( first-lba )
> + block-size * to part-offset ( )
> + 0 0 seek drop
> + disk-buf block-size read drop
> + disk-buf fat-bootblock? ( true|false )
> UNLOOP EXIT
> THEN
> - seek-pos gpt-part-size i * + to seek-pos
> + seek-pos gpt-part-size + to seek-pos
> LOOP
> false
> ;
> @@ -491,7 +549,7 @@ AA268B49521E5A8B CONSTANT GPT-PREP-PARTITION-4
>
> debug-disk-label? IF ." Trying CHRP boot " .s cr THEN
> 1 disk-chrp-boot !
> - dup load-chrp-boot-file ?dup 0 <> IF .s cr nip EXIT THEN
> + dup load-chrp-boot-file ?dup 0 <> IF nip EXIT THEN
> 0 disk-chrp-boot !
>
> debug-disk-label? IF ." Trying GPT boot " .s cr THEN
> @@ -591,6 +649,7 @@ AA268B49521E5A8B CONSTANT GPT-PREP-PARTITION-4
>
> : try-partitions ( -- found? )
> try-dos-partition IF try-files EXIT THEN
> + try-gpt-dos-partition IF try-files EXIT THEN
> \ try-iso9660-partition IF try-files EXIT THEN
> \ ... more partition types here...
> false
This version now looks fine to me.
Reviewed-by: Thomas Huth <thuth at redhat.com>
More information about the Linuxppc-dev
mailing list