[PATCH 1/3] CXL: Add image control to sysfs

[Ryan Grimm]

reset_image_select identifies whether a PERST will cause the image to be
flashed to the card.  And if so, which image.

Valid entries are: "none", "user" and "factory".

A value of "none" means PERST will not cause the image to be flashed.  A power
cycle to the pcie slot is required to load the image.

"user" loads the user provided image and "factory" loads the factory image upon
PERST.

sysfs updates the cxl struct in the driver then calls cxl_update_image_control
to write the vals in the VSEC.

Signed-off-by: Ryan Grimm <grimm at linux.vnet.ibm.com>
---
 Documentation/ABI/testing/sysfs-class-cxl |  9 +++++++
 drivers/misc/cxl/cxl.h                    |  1 +
 drivers/misc/cxl/pci.c                    | 35 +++++++++++++++++++++++++++
 drivers/misc/cxl/sysfs.c                  | 39 +++++++++++++++++++++++++++++++
 4 files changed, 84 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 554405e..d23d1c7 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -127,3 +127,12 @@ Contact:        linuxppc-dev at lists.ozlabs.org
 Description:    read only
                 Will return "user" or "factory" depending on the image loaded
                 onto the card.
+
+What:           /sys/class/cxl/<card>/load_image_on_perst
+Date:           December 2014
+Contact:        linuxppc-dev at lists.ozlabs.org
+Description:    read/write
+                Value of "none" means PERST will not cause image to be loaded
+                to the card.  A power cycle is required to load the image.  
+                Value of "user" and "factory" means PERST will cause either the
+                user or factory image to be loaded.
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 0df0438..518c4c6 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -488,6 +488,7 @@ void cxl_release_one_irq(struct cxl *adapter, int hwirq);
 int cxl_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsigned int num);
 void cxl_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter);
 int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq, unsigned int virq);
+int cxl_update_image_control(struct cxl *adapter);
 
 /* common == phyp + powernv */
 struct cxl_process_element_common {
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index f801c28..26cacc1 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -362,6 +362,41 @@ int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq,
 	return pnv_cxl_ioda_msi_setup(dev, hwirq, virq);
 }
 
+int cxl_update_image_control(struct cxl *adapter)
+{
+	struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
+	int rc;
+	int vsec;
+	u8 image_state;
+
+	if (!(vsec = find_cxl_vsec(dev))) {
+		dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
+		return -ENODEV;
+	}
+
+	if ((rc = CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state))) {
+		dev_err(&dev->dev, "failed to read image state: %i\n", rc);
+		return rc;
+	}
+
+	if (adapter->perst_loads_image)
+		image_state |= CXL_VSEC_PERST_LOADS_IMAGE;
+	else
+		image_state &= ~CXL_VSEC_PERST_LOADS_IMAGE;
+
+	if (adapter->perst_select_user)
+		image_state |= CXL_VSEC_PERST_SELECT_USER;
+	else
+		image_state &= ~CXL_VSEC_PERST_SELECT_USER;
+
+	if ((rc = CXL_WRITE_VSEC_IMAGE_STATE(dev, vsec, image_state))) {
+		dev_err(&dev->dev, "failed to update image control: %i\n", rc);
+		return rc;
+	}
+
+	return 0;
+}
+
 int cxl_alloc_one_irq(struct cxl *adapter)
 {
 	struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index 461bdbd..ed4ad46 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -56,11 +56,50 @@ static ssize_t image_loaded_show(struct device *device,
 	return scnprintf(buf, PAGE_SIZE, "factory\n");
 }
 
+static ssize_t load_image_on_perst_show(struct device *device,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+
+	if (!adapter->perst_loads_image)
+		return scnprintf(buf, PAGE_SIZE, "none\n");
+
+	if (adapter->perst_select_user)
+		return scnprintf(buf, PAGE_SIZE, "user\n");
+	return scnprintf(buf, PAGE_SIZE, "factory\n");
+}
+
+static ssize_t load_image_on_perst_store(struct device *device,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+	int rc;
+
+	if (!strncmp(buf, "none", 4))
+		adapter->perst_loads_image = false;
+	else if (!strncmp(buf, "user", 4)) {
+		adapter->perst_select_user = true;
+		adapter->perst_loads_image = true;
+	} else if (!strncmp(buf, "factory", 7)) {
+		adapter->perst_select_user = false;
+		adapter->perst_loads_image = true;
+	} else
+		return -EINVAL;
+
+	if ((rc = cxl_update_image_control(adapter)))
+		return rc;
+
+	return count;
+}
+
 static struct device_attribute adapter_attrs[] = {
 	__ATTR_RO(caia_version),
 	__ATTR_RO(psl_revision),
 	__ATTR_RO(base_image),
 	__ATTR_RO(image_loaded),
+	__ATTR_RW(load_image_on_perst),
 };
 
 
-- 
1.9.1