[PATCH 09/11] powerpc/8xx: dont save CR in SCRATCH registers
Joakim Tjernlund
Joakim.Tjernlund at transmode.se
Tue Jan 6 05:30:24 AEDT 2015
On Tue, 2014-12-16 at 16:03 +0100, Christophe Leroy wrote:
> CR only needs to be preserved when checking if we are handling a kernel address.
> So we can preserve CR in a register:
> - In ITLBMiss, check is done only when CONFIG_MODULES is defined. Otherwise we
> don't need to do anything at all with CR.
> - If CONFIG_8xx_CPU6 is defined, we have r3 available for saving CR
> - Otherwise, we use r10, then we reload SRR0/MD_EPN into r10 when CR is restored
I think the #ifdef CPU6 code makes for too much maintenance. Can you
loose the #ifdef CPU6 and adjust code so it works for both cases?
>
> Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
>
> ---
> arch/powerpc/kernel/head_8xx.S | 53 +++++++++++++++++++++++++++++-------------
> 1 file changed, 37 insertions(+), 16 deletions(-)
>
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index c89aed9..a073918 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -308,14 +308,10 @@ SystemCall:
> #endif
>
> InstructionTLBMiss:
> + EXCEPTION_PROLOG_0
> #ifdef CONFIG_8xx_CPU6
> mtspr SPRN_DAR, r3
> #endif
> - EXCEPTION_PROLOG_0
> - mfcr r10
> - mtspr SPRN_SPRG_SCRATCH2, r10
> - mfspr r10, SPRN_SRR0/* Get effective address of fault */
> - DO_8xx_CPU15(r11, r10)
>
> /* If we are faulting a kernel address, we have to use the
> * kernel page tables.
> @@ -323,14 +319,33 @@ InstructionTLBMiss:
> #ifdef CONFIG_MODULES
> /* Only modules will cause ITLB Misses as we always
> * pin the first 8MB of kernel memory */
> +#ifdef CONFIG_8xx_CPU6
> + mfspr r10, SPRN_SRR0/* Get effective address of fault */
> + DO_8xx_CPU15(r11, r10)
> + mfcr r3
> andis. r11, r10, 0x8000/* Address >= 0x80000000 */
> +#else
> + mfspr r11, SPRN_SRR0/* Get effective address of fault */
> + DO_8xx_CPU15(r10, r11)
> + mfcr r10
> + andis. r11, r11, 0x8000/* Address >= 0x80000000 */
> #endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> -#ifdef CONFIG_MODULES
> beq 3f
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> +#ifdef CONFIG_8xx_CPU6
> + mtcr r3
> +#else
> + mtcr r10
> + mfspr r10, SPRN_SRR0/* Get effective address of fault */
> #endif
> +#else /* CONFIG_MODULES */
> + mfspr r10, SPRN_SRR0/* Get effective address of fault */
> + DO_8xx_CPU15(r11, r10)
> + mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> +#endif /* CONFIG_MODULES */
> +
> /* Insert level 1 index */
> rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
> lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)/* Get the level 1 entry */
> @@ -362,29 +377,37 @@ InstructionTLBMiss:
> mfspr r3, SPRN_DAR
> mtspr SPRN_DAR, r11/* Tag DAR */
> #endif
> - mfspr r10, SPRN_SPRG_SCRATCH2
> - mtcr r10
> EXCEPTION_EPILOG_0
> rfi
>
> . = 0x1200
> DataStoreTLBMiss:
> -#ifdef CONFIG_8xx_CPU6
> - mtspr SPRN_DAR, r3
> -#endif
> EXCEPTION_PROLOG_0
> - mfcr r10
> - mtspr SPRN_SPRG_SCRATCH2, r10
> - mfspr r10, SPRN_MD_EPN
>
> /* If we are faulting a kernel address, we have to use the
> * kernel page tables.
> */
> +#ifdef CONFIG_8xx_CPU6
> + mtspr SPRN_DAR, r3
> + mfcr r3
> + mfspr r10, SPRN_MD_EPN
> andis. r11, r10, 0x8000
> +#else
> + mfcr r10
> + mfspr r11, SPRN_MD_EPN
> + andis. r11, r11, 0x8000
> +#endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> beq 3f
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> +#ifdef CONFIG_8xx_CPU6
> + mtcr r3
> +#else
> + mtcr r10
> + mfspr r10, SPRN_MD_EPN
> +#endif
> +
> /* Insert level 1 index */
> rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
> lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)/* Get the level 1 entry */
> @@ -441,8 +464,6 @@ DataStoreTLBMiss:
> mfspr r3, SPRN_DAR
> #endif
> mtspr SPRN_DAR, r11/* Tag DAR */
> - mfspr r10, SPRN_SPRG_SCRATCH2
> - mtcr r10
> EXCEPTION_EPILOG_0
> rfi
>
More information about the Linuxppc-dev
mailing list