[PATCH v12 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe
Bjorn Helgaas
bhelgaas at google.com
Tue Feb 24 19:52:34 AEDT 2015
On Tue, Feb 24, 2015 at 02:34:42AM -0600, Bjorn Helgaas wrote:
> From: Wei Yang <weiyang at linux.vnet.ibm.com>
>
> On PHB3, PF IOV BAR will be covered by M64 window to have better PE
> isolation. The total_pe number is usually different from total_VFs, which
> can lead to a conflict between MMIO space and the PE number.
>
> For example, if total_VFs is 128 and total_pe is 256, the second half of
> M64 window will be part of other PCI device, which may already belong
> to other PEs.
I'm still trying to wrap my mind around the explanation here.
I *think* what's going on is that the M64 window must be a power-of-two
size. If the VF(n) BAR space doesn't completely fill it, we might allocate
the leftover space to another device. Then the M64 window for *this*
device may cause the other device to be associated with a PE it didn't
expect.
But I don't understand this well enough to describe it clearly.
More serious code question below...
> Prevent the conflict by reserving additional space for the PF IOV BAR,
> which is total_pe number of VF's BAR size.
>
> [bhelgaas: make dev_printk() output more consistent, index resource[]
> conventionally]
> Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> ---
> arch/powerpc/include/asm/machdep.h | 4 ++
> arch/powerpc/include/asm/pci-bridge.h | 3 ++
> arch/powerpc/kernel/pci-common.c | 5 +++
> arch/powerpc/platforms/powernv/pci-ioda.c | 58 +++++++++++++++++++++++++++++
> 4 files changed, 70 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
> index c8175a3fe560..965547c58497 100644
> --- a/arch/powerpc/include/asm/machdep.h
> +++ b/arch/powerpc/include/asm/machdep.h
> @@ -250,6 +250,10 @@ struct machdep_calls {
> /* Reset the secondary bus of bridge */
> void (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
>
> +#ifdef CONFIG_PCI_IOV
> + void (*pcibios_fixup_sriov)(struct pci_bus *bus);
> +#endif /* CONFIG_PCI_IOV */
> +
> /* Called to shutdown machine specific hardware not already controlled
> * by other drivers.
> */
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 513f8f27060d..de11de7d4547 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -175,6 +175,9 @@ struct pci_dn {
> #define IODA_INVALID_PE (-1)
> #ifdef CONFIG_PPC_POWERNV
> int pe_number;
> +#ifdef CONFIG_PCI_IOV
> + u16 max_vfs; /* number of VFs IOV BAR expended */
> +#endif /* CONFIG_PCI_IOV */
> #endif
> struct list_head child_list;
> struct list_head list;
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 82031011522f..022e9feeb1f2 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1646,6 +1646,11 @@ void pcibios_scan_phb(struct pci_controller *hose)
> if (ppc_md.pcibios_fixup_phb)
> ppc_md.pcibios_fixup_phb(hose);
>
> +#ifdef CONFIG_PCI_IOV
> + if (ppc_md.pcibios_fixup_sriov)
> + ppc_md.pcibios_fixup_sriov(bus);
> +#endif /* CONFIG_PCI_IOV */
> +
> /* Configure PCI Express settings */
> if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> struct pci_bus *child;
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index cd1a56160ded..36c533da5ccb 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1749,6 +1749,61 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
> static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
> #endif /* CONFIG_PCI_MSI */
>
> +#ifdef CONFIG_PCI_IOV
> +static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
> +{
> + struct pci_controller *hose;
> + struct pnv_phb *phb;
> + struct resource *res;
> + int i;
> + resource_size_t size;
> + struct pci_dn *pdn;
> +
> + if (!pdev->is_physfn || pdev->is_added)
> + return;
> +
> + hose = pci_bus_to_host(pdev->bus);
> + phb = hose->private_data;
> +
> + pdn = pci_get_pdn(pdev);
> + pdn->max_vfs = 0;
> +
> + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
> + res = &pdev->resource[i + PCI_IOV_RESOURCES];
> + if (!res->flags || res->parent)
> + continue;
> + if (!pnv_pci_is_mem_pref_64(res->flags)) {
> + dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
> + i, res);
> + continue;
> + }
> +
> + dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
> + size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
> + res->end = res->start + size * phb->ioda.total_pe - 1;
> + dev_dbg(&pdev->dev, " %pR\n", res);
> + dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)",
> + i, res, phb->ioda.total_pe);
> + }
> + pdn->max_vfs = phb->ioda.total_pe;
> +}
> +
> +static void pnv_pci_ioda_fixup_sriov(struct pci_bus *bus)
> +{
> + struct pci_dev *pdev;
> + struct pci_bus *b;
> +
> + list_for_each_entry(pdev, &bus->devices, bus_list) {
> + b = pdev->subordinate;
> +
> + if (b)
> + pnv_pci_ioda_fixup_sriov(b);
> +
> + pnv_pci_ioda_fixup_iov_resources(pdev);
I'm not sure this happens at the right time. We have this call chain:
pcibios_scan_phb
pci_create_root_bus
pci_scan_child_bus
pnv_pci_ioda_fixup_sriov
pnv_pci_ioda_fixup_iov_resources
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
increase res->size to accomodate 256 PEs (or roundup(totalVFs)
so we only do the fixup_iov_resources() when we scan the PHB, and we
wouldn't do it at all for hot-added devices.
> + }
> +}
> +#endif /* CONFIG_PCI_IOV */
> +
> /*
> * This function is supposed to be called on basis of PE from top
> * to bottom style. So the the I/O or MMIO segment assigned to
> @@ -2125,6 +2180,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
> ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
> ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
> ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
> +#ifdef CONFIG_PCI_IOV
> + ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_sriov;
> +#endif /* CONFIG_PCI_IOV */
> pci_add_flags(PCI_REASSIGN_ALL_RSRC);
>
> /* Reset IODA tables to a clean state */
>
More information about the Linuxppc-dev
mailing list