Problems with Kernels 3.17-rc1 and onwards on Acube Sam460 AMCC 460ex board
Julian Margetson
runaway at candw.ms
Fri Feb 20 02:57:39 AEDT 2015
On 2/18/2015 10:56 PM, Michael Ellerman wrote:
> On Wed, 2015-02-18 at 21:36 -0400, Julian Margetson wrote:
>> On 2/18/2015 8:13 PM, Michael Ellerman wrote:
>>
>>> On Wed, 2015-02-18 at 15:45 -0400, Julian Margetson wrote:
>>>> On 2/15/2015 8:18 PM, Michael Ellerman wrote:
>>>>
>>>>> On Sun, 2015-02-15 at 08:16 -0400, Julian Margetson wrote:
>>>>>> Hi
>>>>>>
>>>>>> I am unable to get any kernel beyond the 3.16 branch working on an
>>>>>> Acube Sam460ex
>>>>>> AMCC 460ex based motherboard. Kernel up 3.16.7-ckt6 working.
>>>>> Does reverting b0345bbc6d09 change anything?
>>>>>
>>>>>> [ 6.364350] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>>>>>> [ 6.453794] snd_hda_intel 0001:81:00.1: ppc4xx_setup_msi_irqs: fail mapping irq
>>>>>> [ 6.487530] Unable to handle kernel paging request for data at address 0x0fa06c7c
>>>>>> [ 6.495055] Faulting instruction address: 0xc032202c
>>>>>> [ 6.500033] Vector: 300 (Data Access) at [efa31cf0]
>>>>>> [ 6.504922] pc: c032202c: __reg_op+0xe8/0x100
>>>>>> [ 6.509697] lr: c0014f88: msi_bitmap_free_hwirqs+0x50/0x94
>>>>>> [ 6.515600] sp: efa31da0
>>>>>> [ 6.518491] msr: 21000
>>>>>> [ 6.521112] dar: fa06c7c
>>>>>> [ 6.523915] dsisr: 0
>>>>>> [ 6.526190] current = 0xef8bab00
>>>>>> [ 6.529603] pid = 115, comm = kworker/0:1
>>>>>> [ 6.534163] enter ? for help
>>>>>> [ 6.537054] [link register ] c0014f88 msi_bitmap_free_hwirqs+0x50/0x94
>>>>>> [ 6.543811] [efa31da0] c0014f78 msi_bitmap_free_hwirqs+0x40/0x94 (unreliable)
>>>>>> [ 6.551001] [efa31dc0] c001aee8 ppc4xx_setup_msi_irqs+0xac/0xf4
>>>>>> [ 6.556973] [efa31e00] c03503a4 pci_enable_msi_range+0x1e0/0x280
>>>>>> [ 6.563032] [efa31e40] f92c2f74 azx_probe_work+0xe0/0x57c [snd_hda_intel]
>>>>>> [ 6.569906] [efa31e80] c0036344 process_one_work+0x1e8/0x2f0
>>>>>> [ 6.575627] [efa31eb0] c003677c worker_thread+0x2f4/0x438
>>>>>> [ 6.581079] [efa31ef0] c003a3e4 kthread+0xc8/0xcc
>>>>>> [ 6.585844] [efa31f40] c000aec4 ret_from_kernel_thread+0x5c/0x64
>>>>>> [ 6.591910] mon> <no input ...>
>>>> Managed to do a third git bisect with the following results .
>>> Great work.
>>>
>>>> git bisect bad
>>>> 9279d3286e10736766edcaf815ae10e00856e448 is the first bad commit
>>>> commit 9279d3286e10736766edcaf815ae10e00856e448
>>>> Author: Rasmus Villemoes <linux at rasmusvillemoes.dk>
>>>> Date: Wed Aug 6 16:10:16 2014 -0700
>>>>
>>>> lib: bitmap: change parameter of bitmap_*_region to unsigned
>>> So the bug is in the 4xx MSI code, and has always been there, in fact I don't
>>> see how that code has *ever* worked. The commit you bisected to just caused the
>>> existing bug to cause an oops.
>>>
>>> Can you try this?
>>>
>>> diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
>>> index 6e2e6aa378bb..effb5b878a78 100644
>>> --- a/arch/powerpc/sysdev/ppc4xx_msi.c
>>> +++ b/arch/powerpc/sysdev/ppc4xx_msi.c
>>> @@ -95,11 +95,9 @@ static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>>
>>> list_for_each_entry(entry, &dev->msi_list, list) {
>>> int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
>>> - if (int_no >= 0)
>>> - break;
>>> if (int_no < 0) {
>>> - pr_debug("%s: fail allocating msi interrupt\n",
>>> - __func__);
>>> + pr_warn("%s: fail allocating msi interrupt\n", __func__);
>>> + return -ENOSPC;
>>> }
>>> virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
>>> if (virq == NO_IRQ) {
>>>
>> Thanks.
>> This works with 3.17-rc1. Will try with the 3.18 Branch .
> OK great.
>
>> Any ideas why drm is not working ? (It never worked) .
> No sorry. You might have more luck if you post a new thread to the dri list.
>
>> [ 5.809802] Linux agpgart interface v0.103
>> [ 6.137893] [drm] Initialized drm 1.1.0 20060810
>> [ 6.439872] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>> [ 6.508544] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
> I'm curious why it's failing to allocate MSIs. Possibly it's just run out.
>
> Can you post the output of 'cat /proc/interrupts'?
>
> cheers
>
>
>
With Kernel 3.19.0 for the first time a Radeon HD7750 is now showing
video but the HDMI audio not working .
[ 8.255402] Linux agpgart interface v0.103
[ 8.491334] [drm] Initialized drm 1.1.0 20060810
[ 8.867204] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
[ 8.968395] snd_hda_intel 0001:81:00.1: Force to snoop mode by module
option
[ 9.062427] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
[ 9.243778] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0001:80/0001:80:00.0/0001:81:00.1/sound/card0/input3
[ 9.576242] [drm] radeon kernel modesetting enabled.
[ 9.586233] [drm] initializing kernel modesetting (VERDE
0x1002:0x683F 0x1545:0x7750).
[ 9.595194] [drm] register mmio base: 0xe90000000
[ 9.600195] [drm] register mmio size: 262144
[ 10.498475] Adding 62828k swap on /dev/sda10. Priority:-1 extents:1
across:62828k FS
[ 10.538221] ATOM BIOS: C44501
[ 10.577399] radeon 0001:81:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 10.652394] radeon 0001:81:00.0: GTT: 1024M 0x0000000040000000 -
0x000000007FFFFFFF
[ 10.708420] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 10.734401] [drm] RAM width 128bits DDR
[ 10.774502] [TTM] Zone kernel: Available graphics memory: 380676 kiB
[ 10.830617] [TTM] Zone highmem: Available graphics memory: 1036036 kiB
[ 10.864963] [TTM] Initializing pool allocator
[ 10.891976] [TTM] Initializing DMA pool allocator
[ 10.934818] [drm] radeon: 1024M of VRAM memory ready
[ 10.972424] [drm] radeon: 1024M of GTT memory ready.
[ 11.015787] [drm] Loading verde Microcode
[ 11.058293] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_pfp.bin failed with error -2
[ 11.142723] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_me.bin failed with error -2
[ 11.214753] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_ce.bin failed with error -2
[ 11.271860] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_rlc.bin failed with error -2
[ 11.349589] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_mc.bin failed with error -2
[ 11.415403] EXT3-fs (sda6): using internal journal
[ 11.425054] [drm] radeon/VERDE_mc2.bin: 31500 bytes
[ 11.466433] radeon 0001:81:00.0: Direct firmware load for
radeon/verde_smc.bin failed with error -2
[ 11.572727] [drm] Internal thermal controller with fan control
[ 11.606086] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 11.861380] [drm] radeon: dpm initialized
[ 11.926464] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 11.939005] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 12.014047] [drm] PCIE GART of 1024M enabled (table at
0x0000000000277000).
[ 12.022187] radeon 0001:81:00.0: WB enabled
[ 12.031433] radeon 0001:81:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xee030c00
[ 12.045537] radeon 0001:81:00.0: fence driver on ring 1 use gpu addr
0x0000000040000c04 and cpu addr 0xee030c04
[ 12.056326] radeon 0001:81:00.0: fence driver on ring 2 use gpu addr
0x0000000040000c08 and cpu addr 0xee030c08
[ 12.068686] radeon 0001:81:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xee030c0c
[ 12.080826] radeon 0001:81:00.0: fence driver on ring 4 use gpu addr
0x0000000040000c10 and cpu addr 0xee030c10
[ 12.117757] radeon 0001:81:00.0: fence driver on ring 5 use gpu addr
0x0000000000075a18 and cpu addr 0xf97b5a18
[ 12.133144] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.151401] [drm] Driver supports precise vblank timestamp query.
[ 12.164055] radeon 0001:81:00.0: radeon: MSI limited to 32-bit
[ 12.172006] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
[ 12.178727] [drm] radeon: irq initialized.
[ 13.035762] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test
failed (scratch(0x850C)=0xCAFEDEAD)
[ 13.048036] radeon 0001:81:00.0: disabling GPU acceleration
[ 13.306979] [drm] Radeon Display Connectors
[ 13.325221] [drm] Connector 0:
[ 13.333718] [drm] HDMI-A-1
[ 13.336676] [drm] HPD4
[ 13.339735] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578
0x657c 0x657c
[ 13.347380] [drm] Encoders:
[ 13.350987] [drm] DFP1: INTERNAL_UNIPHY2
[ 13.355514] [drm] Connector 1:
[ 13.358607] [drm] DVI-I-1
[ 13.361752] [drm] HPD2
[ 13.364663] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568
0x656c 0x656c
[ 13.372705] [drm] Encoders:
[ 13.375902] [drm] DFP2: INTERNAL_UNIPHY
[ 13.381008] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.594430] [drm] fb mappable at 0x80478000
[ 13.604813] [drm] vram apper at 0x80000000
[ 13.612036] [drm] size 8294400
[ 13.615691] [drm] fb depth is 24
[ 13.618958] [drm] pitch is 7680
[ 13.825852] Console: switching to colour frame buffer device 240x67
[ 13.919441] radeon 0001:81:00.0: fb0: radeondrmfb frame buffer device
[ 13.934122] radeon 0001:81:00.0: registered panic notifier
[ 13.949441] [drm] Initialized radeon 2.40.0 20080528 for 0001:81:00.0
on minor 0
[ 30.112745] [drm:dce6_audio_get_pin [radeon]] *ERROR* No connected
audio pins found!
More information about the Linuxppc-dev
mailing list