[RFC PATCH 3/3] powerpc/powernv: Remove unused definitions in opal-api.h
Michael Ellerman
mpe at ellerman.id.au
Tue Feb 17 20:01:55 AEDT 2015
This removes definitions in opal-api.h that are completely unused in
Linux.
For each of these I see three possibilities, 1) we *should* be using
them in Linux and patches will arrive to do that, 2) they are not used
but should stay in the header to document the API for some important
reason, 3) they are not used and needn't be part of the API.
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
---
arch/powerpc/include/asm/opal-api.h | 47 -------------------------------------
1 file changed, 47 deletions(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 2984f486f3ba..e8a6baf55e82 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -165,10 +165,6 @@
#ifndef __ASSEMBLY__
/* Other enums */
-enum OpalVendorApiTokens {
- OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
-};
-
enum OpalFreezeState {
OPAL_EEH_STOPPED_NOT_FROZEN = 0,
OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
@@ -236,27 +232,12 @@ enum OpalErrinjectFunc {
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET = 19,
};
-enum OpalShpcAction {
- OPAL_SHPC_GET_LINK_STATE = 0,
- OPAL_SHPC_GET_SLOT_STATE = 1
-};
-
-enum OpalShpcLinkState {
- OPAL_SHPC_LINK_DOWN = 0,
- OPAL_SHPC_LINK_UP = 1
-};
-
enum OpalMmioWindowType {
OPAL_M32_WINDOW_TYPE = 1,
OPAL_M64_WINDOW_TYPE = 2,
OPAL_IO_WINDOW_TYPE = 3
};
-enum OpalShpcSlotState {
- OPAL_SHPC_DEV_NOT_PRESENT = 0,
- OPAL_SHPC_DEV_PRESENT = 1
-};
-
enum OpalExceptionHandler {
OPAL_MACHINE_CHECK_HANDLER = 1,
OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
@@ -348,29 +329,6 @@ enum OpalPciResetState {
OPAL_ASSERT_RESET = 1
};
-enum OpalPciMaskAction {
- OPAL_UNMASK_ERROR_TYPE = 0,
- OPAL_MASK_ERROR_TYPE = 1
-};
-
-enum OpalSlotLedType {
- OPAL_SLOT_LED_ID_TYPE = 0,
- OPAL_SLOT_LED_FAULT_TYPE = 1
-};
-
-enum OpalLedAction {
- OPAL_TURN_OFF_LED = 0,
- OPAL_TURN_ON_LED = 1,
- OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
-};
-
-enum OpalEpowStatus {
- OPAL_EPOW_NONE = 0,
- OPAL_EPOW_UPS = 1,
- OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
- OPAL_EPOW_OVER_INTERNAL_TEMP = 3
-};
-
/*
* Address cycle types for LPC accesses. These also correspond
* to the content of the first cell of the "reg" property for
@@ -440,11 +398,6 @@ enum OpalMemErr_DynErrType {
OPAL_MEM_DYNAMIC_DEALLOC = 0,
};
-/* OpalMemoryErrorData->flags */
-#define OPAL_MEM_CORRECTED_ERROR 0x0001
-#define OPAL_MEM_THRESHOLD_EXCEEDED 0x0002
-#define OPAL_MEM_ACK_REQUIRED 0x8000
-
struct OpalMemoryErrorData {
enum OpalMemErr_Version version:8; /* 0x00 */
enum OpalMemErrType type:8; /* 0x01 */
--
2.1.0
More information about the Linuxppc-dev
mailing list