[PATCH v2] powerpc/powernv: Check image loaded or not before calling flash

[Vasant Hegde]

Present code checks for update_flash_data in opal_flash_term_callback().
update_flash_data has been statically initialized to zero, and that
is the value of FLASH_IMG_READY. Also code update initialization happens
during subsys init.

So if reboot is issued before the subsys init stage then we endup displaying
"Flashing new firmware" message.. which may confuse end user.

This patch fixes above described issue by initializes update_flash status
to invalid state.

Reported-by: Sam Bobroff <sam.bobroff at au1.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/opal-flash.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
index 5c21d9c..0ff07ff 100644
--- a/arch/powerpc/platforms/powernv/opal-flash.c
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -120,7 +120,11 @@ static struct image_header_t	image_header;
 static struct image_data_t	image_data;
 static struct validate_flash_t	validate_flash_data;
 static struct manage_flash_t	manage_flash_data;
-static struct update_flash_t	update_flash_data;
+
+/* Initialize update_flash_data status to No Operation */
+static struct update_flash_t	update_flash_data = {
+	.status = FLASH_NO_OP,
+};
 
 static DEFINE_MUTEX(image_data_mutex);