[PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

igal.liberman at freescale.com igal.liberman at freescale.com
Tue Dec 22 15:18:08 AEDT 2015


From: Igal Liberman <igal.liberman at freescale.com>

Signed-off-by: Igal Liberman <igal.liberman at freescale.com>
---
 .../devicetree/bindings/powerpc/fsl/fman.txt       |   39 ++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 1fc5328..7a6d7c3 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -315,6 +315,16 @@ PROPERTIES
 		Value type: <phandle>
 		Definition: A phandle for 1EEE1588 timer.
 
+- pcsphy-handle
+		Usage required for "fsl,fman-memac" MACs
+		Value type: <phandle>
+		Definition: A phandle for pcsphy.
+
+- tbi-handle
+		Usage required for "fsl,fman-dtsec" MACs
+		Value type: <phandle>
+		Definition: A phandle for tbiphy.
+
 EXAMPLE
 
 fman1_tx28: port at a8000 {
@@ -340,6 +350,7 @@ ethernet at e0000 {
 	reg = <0xe0000 0x1000>;
 	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
 	ptp-timer = <&ptp-timer>;
+	tbi-handle = <&tbi0>;
 };
 
 ============================================================================
@@ -415,6 +426,13 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+  PCS PHY addr must be '0'.
+
 EXAMPLE
 
 Example for FMan v2 external MDIO:
@@ -425,12 +443,28 @@ mdio at f1000 {
 	interrupts = <101 2 0 0>;
 };
 
+Example for FMan v2 internal MDIO:
+
+mdio at e3120 {
+	compatible = "fsl,fman-mdio";
+	reg = <0xe3120 0xee0>;
+	fsl,fman-internal-mdio;
+
+	tbi1: tbi-phy at 8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
 Example for FMan v3 internal MDIO:
 
 mdio at f1000 {
 	compatible = "fsl,fman-memac-mdio";
 	reg = <0xf1000 0x1000>;
 	fsl,fman-internal-mdio;
+
+	pcsphy6: ethernet-phy at 0 {
+		reg = <0x0>;
 };
 
 =============================================================================
@@ -568,6 +602,7 @@ fman at 400000 {
 		cell-index = <0>;
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
 	};
 
 	ethernet at e2000 {
@@ -575,6 +610,7 @@ fman at 400000 {
 		cell-index = <1>;
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
 	};
 
 	ethernet at e4000 {
@@ -582,6 +618,7 @@ fman at 400000 {
 		cell-index = <2>;
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
 	};
 
 	ethernet at e6000 {
@@ -589,6 +626,7 @@ fman at 400000 {
 		cell-index = <3>;
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
 	};
 
 	ethernet at e8000 {
@@ -596,6 +634,7 @@ fman at 400000 {
 		cell-index = <4>;
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
 
 	ethernet at f0000 {
 		cell-index = <8>;
-- 
1.7.9.5



More information about the Linuxppc-dev mailing list