[PATCH] sbc8641: drop bogus PHY IRQ entries from DTS file

[Paul Gortmaker]

This file was originally cloned off of the MPC8641D-HPCN reference
platform, which actually had a PHY IRQ line connected.  However
this board does not.  The bogus entry was largely inert and went
undetected until commit 321beec5047af83db90c88114b7e664b156f49fe
("net: phy: Use interrupts when available in NOLINK state") was
added to the tree.

With the above commit, the board fails to NFS boot since it sits
waiting for a PHY IRQ event that of course never arrives.  Removing
the bogus entries from the DTS file fixes the issue.

Cc: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 arch/powerpc/boot/dts/sbc8641d.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 631ede72e226..68f0ed7626bd 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -227,23 +227,15 @@
 				reg = <0x520 0x20>;
 
 				phy0: ethernet-phy at 1f {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
 					reg = <0x1f>;
 				};
 				phy1: ethernet-phy at 0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
 					reg = <0>;
 				};
 				phy2: ethernet-phy at 1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
 					reg = <1>;
 				};
 				phy3: ethernet-phy at 2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
 					reg = <2>;
 				};
 				tbi0: tbi-phy at 11 {
-- 
2.6.1