[PATCH V2] QorIQ/TMU: add thermal management support based on TMU

Eduardo Valentin edubezval at gmail.com
Fri Aug 14 14:29:20 AEST 2015


Hello Hongtao,

On Fri, Aug 14, 2015 at 03:15:22AM +0000, Hongtao Jia wrote:
> Hi Eduardo,
> 
> In previous mail I asked questions about including header files in device tree.
> Don't bother, I have already figured out the solution.
> 
> Another questions is about cpu cooling:
> I found out that there is no explicit calling for registering cpu cooling
> device in the of-thermal style drivers.

Your understanding is correct.

> 
> And Samsung did it in cpufreq driver: drivers/cpufreq/exynos-cpufreq.c
> 

Yes.

> Should all the of-thermal driver use the same way?

of-thermal won't handle the cooling device registering. It is typically
registered by the cpufreq driver. Have a look in
	drivers/cpufreq/cpufreq-dt.c

> Or is there any recommendation for registering cpu cooling device?
> (I enabled the CONFIG_CPUFREQ_DT and still got no cooling device registered)

If your system supports using cpufreq-dt, then it will handle
registering the cpucooling for you, if you configures the cooling dt
properties in your DT files.

How does your DT entry look like?

BR,

Eduardo 
> 
> Thanks.
> 
> ---
> Best Regards,
> Hongtao
> 
> 
> > -----Original Message-----
> > From: Linuxppc-dev [mailto:linuxppc-dev-
> > bounces+b38951=freescale.com at lists.ozlabs.org] On Behalf Of Hongtao Jia
> > Sent: Friday, August 07, 2015 4:15 PM
> > To: Eduardo Valentin
> > Cc: Wood Scott-B07421; linuxppc-dev at lists.ozlabs.org; linux-
> > pm at vger.kernel.org
> > Subject: RE: [PATCH V2] QorIQ/TMU: add thermal management support based
> > on TMU
> > 
> > Thanks for your comments.
> > Please see my questions inline.
> > 
> > Thanks.
> > ---
> > Best Regards,
> > Hongtao
> > 
> > 
> > > -----Original Message-----
> > > From: Eduardo Valentin [mailto:edubezval at gmail.com]
> > > Sent: Thursday, August 06, 2015 3:43 AM
> > > To: Jia Hongtao-B38951
> > > Cc: linux-pm at vger.kernel.org; linuxppc-dev at lists.ozlabs.org; Wood
> > > Scott-
> > > B07421
> > > Subject: Re: [PATCH V2] QorIQ/TMU: add thermal management support
> > > based on TMU
> > >
> > > On Thu, Jul 30, 2015 at 08:13:09AM +0000, Hongtao Jia wrote:
> > > > - "Any specific reason why not using OF thermal?"
> > > > - No, actually.
> > > >
> > > > I'd like to use OF thermal after some clarification.
> > > >
> > > > Regarding to "cooling-maps". For some cases there should be more
> > > > than one cpus as cooling device and they are independent.
> > > > 1. Let's say 4. So we need to provide 4 maps like map0-map3. Right?
> > >
> > > That would depend on the amount of sensors you have. Do you have one
> > > sensor per cpu? if the answer is yes, then you probably want to have
> > > four different map entries, yes, but one on each thermal zone of each
> > > cpu temperature sensor. if the answer is no, then you would need to
> > > have all the maps in the same thermal zone.
> > >
> > > > 2. "cooling-max-level" may vary depend on switch settings or firmware.
> > > Is that
> > > >    OK if I do not provide "cooling-min-level" and "cooling-max-level"
> > > property?
> > >
> > > That is already achievable by using the cooling-device property of a
> > > cooling map.
> > >
> > > Please have a look in the example section of the
> > > Documentation/devicetree/bindings/thermal/thermal.txt
> > 
> > Yes, I read this file.
> > So in my understanding:
> > There is no need to provide "cooling-min-level" and "cooling-max-level"
> > property.
> > THERMAL_NO_LIMIT value in cooling device node will indicate the driver to
> > automatically parse the min and max state, right?
> > 
> > Talking about THERMAL_NO_LIMIT, I need to #include <dt-
> > bindings/thermal/thermal.h> to provide the definition. But I got
> > compiling error when build dtb file.
> > I did some research and using "make t1040qds.dtb" in order to involve
> > preprocessor.
> > But with simply adding "#include <dt-bindings/thermal/thermal.h>" to
> > t1040si-post.dtsi at line 35 I still got error like this:
> > Error: arch/powerpc/boot/dts/fsl/t1040si-post.dtsi:35.1-9 syntax error
> > FATAL ERROR: Unable to parse input tree
> > 
> > Could you help me out here.
> > Thanks.
> > 
> > >
> > > Let me know if you need further clarification.
> > >
> > >
> > > BR,
> > >
> > > Eduardo Valentin
> > >
> > > >
> > > > Thanks.
> > > > -Hongtao
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Eduardo Valentin [mailto:edubezval at gmail.com]
> > > > > Sent: Thursday, July 30, 2015 2:56 PM
> > > > > To: Jia Hongtao-B38951
> > > > > Cc: linux-pm at vger.kernel.org; linuxppc-dev at lists.ozlabs.org; Wood
> > > > > Scott-
> > > > > B07421
> > > > > Subject: Re: [PATCH V2] QorIQ/TMU: add thermal management support
> > > > > based on TMU
> > > > >
> > > > > On Wed, Jul 29, 2015 at 02:19:39PM +0800, Jia Hongtao wrote:
> > > > > > It supports one critical trip point and one passive trip point.
> > > > > > The cpufreq is used as the cooling device to throttle CPUs when
> > > > > > the passive trip is crossed.
> > > > > >
> > > > > > Signed-off-by: Jia Hongtao <hongtao.jia at freescale.com>
> > > > > > ---
> > > > > > This patch based on:
> > > > > > http://patchwork.ozlabs.org/patch/482987/
> > > > > >
> > > > > > Changes for V2:
> > > > > > * Add tmu-range parse.
> > > > > > * Use default trend hook.
> > > > > > * Using latest thermal_zone_bind_cooling_device API.
> > > > > > * Add calibration check during initialization.
> > > > > > * Disable/enalbe device when suspend/resume.
> > > > > >
> > > > > >  drivers/thermal/Kconfig         |  11 ++
> > > > > >  drivers/thermal/Makefile        |   1 +
> > > > > >  drivers/thermal/qoriq_thermal.c | 406
> > > > > > ++++++++++++++++++++++++++++++++++++++++
> > > > > >  3 files changed, 418 insertions(+)  create mode 100644
> > > > > > drivers/thermal/qoriq_thermal.c
> > > > > >
> > > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > > > > > index
> > > > > > 118938e..a200745 100644
> > > > > > --- a/drivers/thermal/Kconfig
> > > > > > +++ b/drivers/thermal/Kconfig
> > > > > > @@ -180,6 +180,17 @@ config IMX_THERMAL
> > > > > >  	  cpufreq is used as the cooling device to throttle CPUs when
> > > the
> > > > > >  	  passive trip is crossed.
> > > > > >
> > > > > > +config QORIQ_THERMAL
> > > > > > +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> > > > > > +	depends on CPU_THERMAL
> > > > > > +	depends on OF
> > > > > > +	default n
> > > > > > +	help
> > > > > > +	  Enable thermal management based on Freescale QorIQ Thermal
> > > > > Monitoring
> > > > > > +	  Unit (TMU). It supports one critical trip point and one
> > > > > > +passive
> > > > > trip
> > > > > > +	  point. The cpufreq is used as the cooling device to
> > > throttle
> > > > > > +CPUs
> > > > > when
> > > > > > +	  the passive trip is crossed.
> > > > > > +
> > > > > >  config SPEAR_THERMAL
> > > > > >  	bool "SPEAr thermal sensor driver"
> > > > > >  	depends on PLAT_SPEAR
> > > > > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > > > > > index
> > > > > > 535dfee..8c25859 100644
> > > > > > --- a/drivers/thermal/Makefile
> > > > > > +++ b/drivers/thermal/Makefile
> > > > > > @@ -33,6 +33,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+=
> > dove_thermal.o
> > > > > >  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
> > > > > >  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
> > > > > >  obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
> > > > > > +obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
> > > > > >  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+=
> > > db8500_cpufreq_cooling.o
> > > > > >  obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
> > > > > >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
> > > > > > diff --git a/drivers/thermal/qoriq_thermal.c
> > > > > > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > > > > > 0000000..0694f42
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/thermal/qoriq_thermal.c
> > > > > > @@ -0,0 +1,406 @@
> > > > > > +/*
> > > > > > + * Copyright 2015 Freescale Semiconductor, Inc.
> > > > > > + *
> > > > > > + * This program is free software; you can redistribute it
> > > > > > +and/or modify it
> > > > > > + * under the terms and conditions of the GNU General Public
> > > > > > +License,
> > > > > > + * version 2, as published by the Free Software Foundation.
> > > > > > + *
> > > > > > + * This program is distributed in the hope it will be useful,
> > > > > > +but WITHOUT
> > > > > > + * ANY WARRANTY; without even the implied warranty of
> > > > > > +MERCHANTABILITY or
> > > > > > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
> > > > > > +Public License for
> > > > > > + * more details.
> > > > > > + *
> > > > > > + */
> > > > > > +
> > > > > > +/*
> > > > > > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)  */
> > > > > > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h>
> > > > > > +#include <linux/module.h> #include <linux/platform_device.h>
> > > > > > +#include <linux/err.h> #include <linux/io.h> #include
> > > > > > +<linux/of.h> #include <linux/of_address.h> #include
> > > > > > +<linux/thermal.h>
> > > > > > +
> > > > > > +#define SITES_MAX		16
> > > > > > +
> > > > > > +#define TMU_TEMP_PASSIVE	85000
> > > > > > +#define TMU_TEMP_CRITICAL	95000
> > > > > > +
> > > > > > +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> > > > > > +#define TMU_POLLING_DELAY	5000
> > > > > > +
> > > > > > +/* The driver supports 1 passive trip point and 1 critical trip
> > > > > > +point */ enum tmu_thermal_trip {
> > > > > > +	TMU_TRIP_PASSIVE,
> > > > > > +	TMU_TRIP_CRITICAL,
> > > > > > +	TMU_TRIP_NUM,
> > > > > > +};
> > > > > > +
> > > > > > +/*
> > > > > > + * QorIQ TMU Registers
> > > > > > + */
> > > > > > +struct qoriq_tmu_site_regs {
> > > > > > +	__be32 tritsr;		/* Immediate Temperature Site
> > > Register */
> > > > > > +	__be32 tratsr;		/* Average Temperature Site Register
> > > */
> > > > > > +	u8 res0[0x8];
> > > > > > +} __packed;
> > > > > > +
> > > > > > +struct qoriq_tmu_regs {
> > > > > > +	__be32 tmr;		/* Mode Register */
> > > > > > +#define TMR_DISABLE	0x0
> > > > > > +#define TMR_ME		0x80000000
> > > > > > +#define TMR_ALPF	0x0c000000
> > > > > > +#define TMR_MSITE	0x00008000
> > > > > > +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> > > > > > +	__be32 tsr;		/* Status Register */
> > > > > > +	__be32 tmtmir;		/* Temperature measurement interval
> > > > > Register */
> > > > > > +#define TMTMIR_DEFAULT	0x00000007
> > > > > > +	u8 res0[0x14];
> > > > > > +	__be32 tier;		/* Interrupt Enable Register */
> > > > > > +#define TIER_DISABLE	0x0
> > > > > > +	__be32 tidr;		/* Interrupt Detect Register */
> > > > > > +	__be32 tiscr;		/* Interrupt Site Capture Register */
> > > > > > +	__be32 ticscr;		/* Interrupt Critical Site Capture
> > > Register
> > > > > */
> > > > > > +	u8 res1[0x10];
> > > > > > +	__be32 tmhtcrh;		/* High Temperature Capture Register
> > > */
> > > > > > +	__be32 tmhtcrl;		/* Low Temperature Capture Register
> > > */
> > > > > > +	u8 res2[0x8];
> > > > > > +	__be32 tmhtitr;		/* High Temperature Immediate
> > > Threshold */
> > > > > > +	__be32 tmhtatr;		/* High Temperature Average Threshold
> > > */
> > > > > > +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold
> > > */
> > > > > > +	u8 res3[0x24];
> > > > > > +	__be32 ttcfgr;		/* Temperature Configuration Register
> > > */
> > > > > > +	__be32 tscfgr;		/* Sensor Configuration Register */
> > > > > > +	u8 res4[0x78];
> > > > > > +	struct qoriq_tmu_site_regs site[SITES_MAX];
> > > > > > +	u8 res5[0x9f8];
> > > > > > +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> > > > > > +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> > > > > > +	u8 res6[0x310];
> > > > > > +	__be32 ttr0cr;		/* Temperature Range 0 Control
> > > Register */
> > > > > > +	__be32 ttr1cr;		/* Temperature Range 1 Control
> > > Register */
> > > > > > +	__be32 ttr2cr;		/* Temperature Range 2 Control
> > > Register */
> > > > > > +	__be32 ttr3cr;		/* Temperature Range 3 Control
> > > Register */
> > > > > > +};
> > > > > > +
> > > > > > +/*
> > > > > > + * Thermal zone data
> > > > > > + */
> > > > > > +struct qoriq_tmu_data {
> > > > > > +	struct thermal_zone_device *tz;
> > > > > > +	struct thermal_cooling_device *cdev;
> > > > > > +	enum thermal_device_mode mode;
> > > > > > +	unsigned long temp_passive;
> > > > > > +	unsigned long temp_critical;
> > > > > > +	struct qoriq_tmu_regs __iomem *regs; };
> > > > > > +
> > > > > > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > > > > > +			enum thermal_device_mode *mode) {
> > > > > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > > > > +
> > > > > > +	*mode = data->mode;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > > > > > +			enum thermal_device_mode mode) {
> > > > > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > > > > +
> > > > > > +	if (mode == THERMAL_DEVICE_ENABLED) {
> > > > > > +		tz->polling_delay = TMU_POLLING_DELAY;
> > > > > > +		tz->passive_delay = TMU_PASSIVE_DELAY;
> > > > > > +		thermal_zone_device_update(tz);
> > > > > > +	} else {
> > > > > > +		tz->polling_delay = 0;
> > > > > > +		tz->passive_delay = 0;
> > > > > > +	}
> > > > > > +
> > > > > > +	data->mode = mode;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_get_temp(struct thermal_zone_device *tz,
> > > > > > +unsigned long
> > > > > > +*temp) {
> > > > > > +	u8 val;
> > > > > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > > > > +
> > > > > > +	val = ioread32be(&data->regs->site[0].tritsr);
> > > > > > +	*temp = (unsigned long)val * 1000;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_get_trip_type(struct thermal_zone_device *tz,
> > > > > > +int
> > > trip,
> > > > > > +			     enum thermal_trip_type *type) {
> > > > > > +	*type = (trip == TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > > > > > +					     THERMAL_TRIP_CRITICAL;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_get_trip_temp(struct thermal_zone_device *tz,
> > > > > > +int
> > > trip,
> > > > > > +			     unsigned long *temp)
> > > > > > +{
> > > > > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > > > > +
> > > > > > +	*temp = (trip == TMU_TRIP_PASSIVE) ? data->temp_passive :
> > > > > > +					     data->temp_critical;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > > > > > +			     unsigned long *temp)
> > > > > > +{
> > > > > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > > > > +
> > > > > > +	*temp = data->temp_critical;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_bind(struct thermal_zone_device *tz,
> > > > > > +		    struct thermal_cooling_device *cdev) {
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	ret = thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > > cdev,
> > > > > > +					       THERMAL_NO_LIMIT,
> > > > > > +					       THERMAL_NO_LIMIT,
> > > > > > +					       THERMAL_WEIGHT_DEFAULT);
> > > > > > +	if (ret) {
> > > > > > +		dev_err(&tz->device,
> > > > > > +			"Binding zone %s with cdev %s failed:%d\n",
> > > > > > +			tz->type, cdev->type, ret);
> > > > > > +	}
> > > > > > +
> > > > > > +	return ret;
> > > > > > +}
> > > > > > +
> > > > > > +static int tmu_unbind(struct thermal_zone_device *tz,
> > > > > > +		      struct thermal_cooling_device *cdev) {
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	ret = thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > > > > cdev);
> > > > > > +	if (ret) {
> > > > > > +		dev_err(&tz->device,
> > > > > > +			"Unbinding zone %s with cdev %s failed:%d\n",
> > > > > > +			tz->type, cdev->type, ret);
> > > > > > +	}
> > > > > > +
> > > > > > +	return ret;
> > > > > > +}
> > > > > > +
> > > > > > +static int qoriq_tmu_calibration(struct platform_device *pdev) {
> > > > > > +	int i, val, len;
> > > > > > +	u32 range[4];
> > > > > > +	const __be32 *calibration;
> > > > > > +	struct device_node *node = pdev->dev.of_node;
> > > > > > +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > > > > > +
> > > > > > +	/* Disable monitoring before calibration */
> > > > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > > > +
> > > > > > +	if (of_property_read_u32_array(node, "fsl,tmu-range", range,
> > > 4))
> > > > > > +		return -1;
> > > > > > +
> > > > > > +	/* Init temperature range registers */
> > > > > > +	iowrite32be(range[0], &data->regs->ttr0cr);
> > > > > > +	iowrite32be(range[1], &data->regs->ttr1cr);
> > > > > > +	iowrite32be(range[2], &data->regs->ttr2cr);
> > > > > > +	iowrite32be(range[3], &data->regs->ttr3cr);
> > > > > > +
> > > > > > +	calibration = of_get_property(node, "fsl,tmu-calibration",
> > > &len);
> > > > > > +	if (calibration == NULL)
> > > > > > +		return -1;
> > > > > > +
> > > > > > +	for (i = 0; i < len; i += 8, calibration += 2) {
> > > > > > +		val = (int)of_read_number(calibration, 1);
> > > > > > +		iowrite32be(val, &data->regs->ttcfgr);
> > > > > > +		val = (int)of_read_number(calibration + 1, 1);
> > > > > > +		iowrite32be(val, &data->regs->tscfgr);
> > > > > > +	}
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
> > > > > > +	/* Disable interrupt, using polling instead */
> > > > > > +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> > > > > > +
> > > > > > +	/* Set update_interval */
> > > > > > +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > > > > > +
> > > > > > +	/* Enable monitoring */
> > > > > > +	iowrite32be(TMR_ALL, &data->regs->tmr); }
> > > > > > +
> > > > > > +static struct thermal_zone_device_ops tmu_tz_ops = {
> > > > > > +	.bind = tmu_bind,
> > > > > > +	.unbind = tmu_unbind,
> > > > > > +	.get_temp = tmu_get_temp,
> > > > > > +	.get_mode = tmu_get_mode,
> > > > > > +	.set_mode = tmu_set_mode,
> > > > > > +	.get_trip_type = tmu_get_trip_type,
> > > > > > +	.get_trip_temp = tmu_get_trip_temp,
> > > > > > +	.get_crit_temp = tmu_get_crit_temp, };
> > > > > > +
> > > > > > +static int qoriq_tmu_probe(struct platform_device *pdev) {
> > > > > > +	int ret;
> > > > > > +	struct cpumask clip_cpus;
> > > > > > +	struct qoriq_tmu_data *data;
> > > > > > +
> > > > > > +	if (!cpufreq_get_current_driver()) {
> > > > > > +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > > > > > +		return -EPROBE_DEFER;
> > > > > > +	}
> > > > > > +
> > > > > > +	if (!pdev->dev.of_node) {
> > > > > > +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> > > > > > +		return -EFAULT;
> > > > > > +	}
> > > > > > +
> > > > > > +	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > > > > > +			    GFP_KERNEL);
> > > > > > +	if (!data)
> > > > > > +		return -ENOMEM;
> > > > > > +
> > > > > > +	dev_set_drvdata(&pdev->dev, data);
> > > > > > +	data->regs = of_iomap(pdev->dev.of_node, 0);
> > > > > > +
> > > > > > +	if (!data->regs) {
> > > > > > +		dev_err(&pdev->dev, "Failed to get memory region\n");
> > > > > > +		ret = -ENODEV;
> > > > > > +		goto err_iomap;
> > > > > > +	}
> > > > > > +
> > > > > > +	ret = qoriq_tmu_calibration(pdev);	/* TMU calibration */
> > > > > > +	if (ret < 0) {
> > > > > > +		dev_err(&pdev->dev, "TMU calibration failed.\n");
> > > > > > +		ret = -ENODEV;
> > > > > > +		goto err_iomap;
> > > > > > +	}
> > > > > > +
> > > > > > +	qoriq_tmu_init_device(data);	/* TMU initialization */
> > > > > > +
> > > > > > +	cpumask_setall(&clip_cpus);
> > > > > > +	data->cdev = cpufreq_cooling_register(&clip_cpus);
> > > > > > +	if (IS_ERR(data->cdev)) {
> > > > > > +		ret = PTR_ERR(data->cdev);
> > > > > > +		dev_err(&data->cdev->device,
> > > > > > +			"Failed to register cpufreq cooling device: %d\n",
> > > ret);
> > > > > > +		goto err_cooling;
> > > > > > +	}
> > > > > > +
> > > > > > +	data->temp_passive = TMU_TEMP_PASSIVE;
> > > > > > +	data->temp_critical = TMU_TEMP_CRITICAL;
> > > > > > +	data->tz = thermal_zone_device_register("tmu_thermal_zone",
> > > > >
> > > > > Any specific reason why not using OF thermal?
> > > > >
> > > > > > +						TMU_TRIP_NUM,
> > > > > > +						0, data,
> > > > > > +						&tmu_tz_ops, NULL,
> > > > > > +						TMU_PASSIVE_DELAY,
> > > > > > +						TMU_POLLING_DELAY);
> > > > > > +
> > > > > > +	if (IS_ERR(data->tz)) {
> > > > > > +		ret = PTR_ERR(data->tz);
> > > > > > +		dev_err(&pdev->dev,
> > > > > > +			"Failed to register thermal zone device %d\n",
> > > ret);
> > > > > > +		goto err_thermal;
> > > > > > +	}
> > > > > > +
> > > > > > +	data->mode = THERMAL_DEVICE_ENABLED;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +
> > > > > > +err_thermal:
> > > > > > +	cpufreq_cooling_unregister(data->cdev);
> > > > > > +
> > > > > > +err_cooling:
> > > > > > +	iounmap(data->regs);
> > > > > > +
> > > > > > +err_iomap:
> > > > > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > > > > +	devm_kfree(&pdev->dev, data);
> > > > > > +
> > > > > > +	return ret;
> > > > > > +}
> > > > > > +
> > > > > > +static int qoriq_tmu_remove(struct platform_device *pdev) {
> > > > > > +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > > > > > +
> > > > > > +	/* Disable monitoring */
> > > > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > > > +
> > > > > > +	thermal_zone_device_unregister(data->tz);
> > > > > > +	cpufreq_cooling_unregister(data->cdev);
> > > > > > +	iounmap(data->regs);
> > > > > > +
> > > > > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > > > > +	devm_kfree(&pdev->dev, data);
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +#ifdef CONFIG_PM_SLEEP
> > > > > > +static int qoriq_tmu_suspend(struct device *dev) {
> > > > > > +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > > > > > +
> > > > > > +	/* Disable monitoring */
> > > > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > > > +	data->mode = THERMAL_DEVICE_DISABLED;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int qoriq_tmu_resume(struct device *dev) {
> > > > > > +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > > > > > +
> > > > > > +	/* Enable monitoring */
> > > > > > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > > > > > +	data->mode = THERMAL_DEVICE_ENABLED;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +#endif
> > > > > > +
> > > > > > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > > > > > +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> > > > > > +
> > > > > > +static const struct of_device_id qoriq_tmu_match[] = {
> > > > > > +	{ .compatible = "fsl,qoriq-tmu", },
> > > > > > +	{},
> > > > > > +};
> > > > > > +
> > > > > > +static struct platform_driver qoriq_tmu = {
> > > > > > +	.driver	= {
> > > > > > +		.owner		= THIS_MODULE,
> > > > > > +		.name		= "qoriq_thermal",
> > > > > > +		.pm = &qoriq_tmu_pm_ops,
> > > > > > +		.of_match_table	= qoriq_tmu_match,
> > > > > > +	},
> > > > > > +	.probe	= qoriq_tmu_probe,
> > > > > > +	.remove	= qoriq_tmu_remove,
> > > > > > +};
> > > > > > +module_platform_driver(qoriq_tmu);
> > > > > > +
> > > > > > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia at freescale.com>");
> > > > > > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit
> > > > > > +driver"); MODULE_LICENSE("GPL v2");
> > > > > > --
> > > > > > 2.1.0.27.g96db324
> > > > > >
> > _______________________________________________
> > Linuxppc-dev mailing list
> > Linuxppc-dev at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/linuxppc-dev


More information about the Linuxppc-dev mailing list