[PATCH V2 1/6] powerpc/powernv: don't enable SRIOV when VF BAR contains non M64 BAR

Alexey Kardashevskiy aik at ozlabs.ru
Thu Aug 6 16:10:21 AEST 2015


On 08/06/2015 02:35 PM, Gavin Shan wrote:
> On Wed, Aug 05, 2015 at 09:24:58AM +0800, Wei Yang wrote:
>> On PHB_IODA2, we enable SRIOV devices by mapping IOV BAR with M64 BARs. If
>> a SRIOV device's BAR is not 64-bit prefetchable, this is not assigned from
>> M64 windwo, which means M64 BAR can't work on it.
>>
>
> s/PHB_IODA2/PHB3


No, it is IODA2. OPEL does PHB3-specific bits, the host kernel just uses OPAL.


> s/windwo/window
>
>> This patch makes this explicit.
>>
>> Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
>
> The idea sounds right, but there is one question as below.
>
>> ---
>> arch/powerpc/platforms/powernv/pci-ioda.c |   25 +++++++++----------------
>> 1 file changed, 9 insertions(+), 16 deletions(-)
>>
>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>> index 5738d31..9b41dba 100644
>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>> @@ -908,9 +908,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
>> 		if (!res->flags || !res->parent)
>> 			continue;
>>
>> -		if (!pnv_pci_is_mem_pref_64(res->flags))
>> -			continue;
>> -
>> 		/*
>> 		 * The actual IOV BAR range is determined by the start address
>> 		 * and the actual size for num_vfs VFs BAR.  This check is to
>> @@ -939,9 +936,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
>> 		if (!res->flags || !res->parent)
>> 			continue;
>>
>> -		if (!pnv_pci_is_mem_pref_64(res->flags))
>> -			continue;
>> -
>> 		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
>> 		res2 = *res;
>> 		res->start += size * offset;
>> @@ -1221,9 +1215,6 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
>> 		if (!res->flags || !res->parent)
>> 			continue;
>>
>> -		if (!pnv_pci_is_mem_pref_64(res->flags))
>> -			continue;
>> -
>> 		for (j = 0; j < vf_groups; j++) {
>> 			do {
>> 				win = find_next_zero_bit(&phb->ioda.m64_bar_alloc,
>> @@ -1510,6 +1501,12 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
>> 	pdn = pci_get_pdn(pdev);
>>
>> 	if (phb->type == PNV_PHB_IODA2) {
>> +		if (!pdn->vfs_expanded) {
>> +			dev_info(&pdev->dev, "don't support this SRIOV device"
>> +				" with non M64 VF BAR\n");
>> +			return -EBUSY;
>> +		}
>> +
>
> It would be -ENOSPC since -EBUSY indicates the devices (VFs) are temparily
> unavailable. For this case, the VFs are permanently unavailable because of
> running out of space to accomodate M64 and non-M64 VF BARs.
>
> The error message could be printed with dev_warn() and it would be precise
> as below or something else you prefer:
>
> 	dev_warn(&pdev->dev, "SRIOV not supported because of non-M64 VF BAR\n");


Both messages are cryptic.

If it is not M64 BAR, then what is it? It is always in one of M64 BARs (in 
the worst case - BAR#15?), the difference is if it is segmented or not, no?



>
>
>> 		/* Calculate available PE for required VFs */
>> 		mutex_lock(&phb->ioda.pe_alloc_mutex);
>> 		pdn->offset = bitmap_find_next_zero_area(
>> @@ -2774,9 +2771,10 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
>> 		if (!res->flags || res->parent)
>> 			continue;
>> 		if (!pnv_pci_is_mem_pref_64(res->flags)) {
>> -			dev_warn(&pdev->dev, " non M64 VF BAR%d: %pR\n",
>> +			dev_warn(&pdev->dev, "Don't support SR-IOV with"
>> +					" non M64 VF BAR%d: %pR. \n",
>> 				 i, res);
>> -			continue;
>> +			return;
>> 		}
>>
>> 		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
>> @@ -2795,11 +2793,6 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
>> 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
>> 		if (!res->flags || res->parent)
>> 			continue;
>> -		if (!pnv_pci_is_mem_pref_64(res->flags)) {
>> -			dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
>> -				 i, res);
>> -			continue;
>> -		}
>
> When any one IOV BAR on the PF is non-M64, none of the VFs can be enabled.
> Will we still allocate/assign M64 or M32 resources for the IOV BARs? If so,
> I think it can be avoided.
>
>>
>> 		dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
>> 		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
>> --
>> 1.7.9.5
>>
>


-- 
Alexey


More information about the Linuxppc-dev mailing list