[PATCH v3 00/21] PowerPC/PowerNV: PCI Slot Management

[Gavin Shan]

The series of patches intend to support PCI slot for PowerPC PowerNV platform,
which is running on top of skiboot firmware. The patchset requires corresponding
changes from skiboot firmware, which is sent to skiboot at lists.ozlabs.org for
review. The PCI slots are exposed by skiboot with device node properties, and
kernel utilizes those properties to populated PCI slots accordingly.

The original PCI infrastructure on PowerNV platform can't support hotplug because
the PE is assigned during PHB fixup time, which is called for once during system
boot time. For this, the PCI infrastructure on PowerNV platform has been reworked
for a lot. After that, the PE and its corresponding resources (IODT, M32DT, M64
segments, DMA32 and bypass window) are assigned upon updating PCI bridge's
resources, which might decide PE# assigned to the PE (e.g. M64 resources, on P8
strictly speaking). Each PE will maintain a reference count, which is (number of
child PCI devices + 1). That indicates when last child PCI device leaves the PE,
the PE and its included resources will be relased and put back into free pool
again. With this design, the PE will be released when EEH PE is released.
PATCH[1 - 8] are related to this part.

>From skiboot perspective, PCI slot is providing (hot/fundamental/complete) resets
to EEH. The kernel gets to know if skiboot supports various reset on one particular
PCI slot through device-tree node. If it does, EEH will utilize the functionality
provided by skiboot. Besides, the device-tree nodes have to change in order to
support PCI hotplug. For example, when one PCI adapter inserted to one slot,
its device-tree node should be added to the system dynamically. Conversely, the
device-tree node should be removed from the system when the PCI adapter is going
to be offline. Since pci_dn and eeh_dev have same life cyle as PCI device nodes,
they should be added/removed accordingly during PCI hotplug. Patch[9 - 20] are
doing the related work.

The last patch is the standalone PCI hotplug driver for PowerNV platform. When
removing PCI adapter from one PCI slot, which is invoked by command in userland,
the skiboot will power off the slot to save power and remove all device-tree
nodes for all PCI devices behind the slot. Conversely, the Power to the slot
is turned on, the PCI devices behind the slot is rescanned, and the device-tree
nodes for those newly detected PCI devices will be built in skiboot. For both
of cases, one message will be sent to kernel by skiboot so that the kernel
can adjust the device-tree accordingly. At the same time, the kernel also have
to deallocate or allocate PE# and its related resources (PE# and so on) for the
removed/added PCI devices.

Changelog
=========
v3:
   * Rebased to 4.1.RC0
   * PowerNV PCI infrasturcture is total refactored in order to support PCI
     hotplug. The PowerNV hotplug driver is also reworked a lot because of
     the changes in skiboot in order to support PCI hotplug.


Gavin Shan (21):
  pci: Add pcibios_setup_bridge()
  powerpc/powernv: Enable M64 on P7IOC
  powerpc/powernv: M64 support improvement
  powerpc/powernv: Improve IO and M32 mapping
  powerpc/powernv: Improve DMA32 segment assignment
  powerpc/powernv: Create PEs dynamically
  powerpc/powernv: Release PEs dynamically
  powerpc/powernv: Drop pnv_ioda_setup_dev_PE()
  powerpc/eeh: Delay probing EEH device during hotplug
  powerpc/powernv: Use PCI slot reset infrastructure
  powerpc/powernv: Fundamental reset for PCI bus reset
  powerpc/pci: Don't scan empty slot
  powerpc/pci: Move pcibios_find_pci_bus() around
  powerpc/powernv: Introduce pnv_pci_poll()
  powerpc/powernv: Functions to get/reset PCI slot status
  powerpc/pci: Delay creating pci_dn
  powerpc/pci: Create eeh_dev while creating pci_dn
  powerpc/pci: Export traverse_pci_device_nodes()
  powerpc/pci: Update bridge windows on PCI plugging
  powerpc/powernv: Select OF_DYNAMIC
  pci/hotplug: PowerPC PowerNV PCI hotplug driver

 arch/powerpc/include/asm/eeh.h                 |    7 +-
 arch/powerpc/include/asm/opal-api.h            |    7 +-
 arch/powerpc/include/asm/opal.h                |    7 +-
 arch/powerpc/include/asm/pci-bridge.h          |    7 +-
 arch/powerpc/include/asm/pnv-pci.h             |    5 +
 arch/powerpc/include/asm/ppc-pci.h             |    7 +-
 arch/powerpc/kernel/eeh.c                      |    7 +
 arch/powerpc/kernel/eeh_dev.c                  |   20 +-
 arch/powerpc/kernel/pci-common.c               |   18 +-
 arch/powerpc/kernel/pci-hotplug.c              |   44 +-
 arch/powerpc/kernel/pci_dn.c                   |  119 +-
 arch/powerpc/platforms/maple/pci.c             |   35 +-
 arch/powerpc/platforms/pasemi/pci.c            |    3 -
 arch/powerpc/platforms/powermac/pci.c          |   39 +-
 arch/powerpc/platforms/powernv/Kconfig         |    1 +
 arch/powerpc/platforms/powernv/eeh-powernv.c   |  245 ++--
 arch/powerpc/platforms/powernv/opal-wrappers.S |    3 +
 arch/powerpc/platforms/powernv/pci-ioda.c      | 1657 +++++++++++++++---------
 arch/powerpc/platforms/powernv/pci.c           |   64 +-
 arch/powerpc/platforms/powernv/pci.h           |   52 +-
 arch/powerpc/platforms/pseries/msi.c           |    4 +-
 arch/powerpc/platforms/pseries/pci_dlpar.c     |   32 -
 arch/powerpc/platforms/pseries/setup.c         |    9 +-
 drivers/pci/hotplug/Kconfig                    |   12 +
 drivers/pci/hotplug/Makefile                   |    4 +
 drivers/pci/hotplug/powernv_php.c              |  146 +++
 drivers/pci/hotplug/powernv_php.h              |   78 ++
 drivers/pci/hotplug/powernv_php_slot.c         |  913 +++++++++++++
 drivers/pci/setup-bus.c                        |   12 +-
 include/linux/pci.h                            |    1 +
 30 files changed, 2623 insertions(+), 935 deletions(-)
 create mode 100644 drivers/pci/hotplug/powernv_php.c
 create mode 100644 drivers/pci/hotplug/powernv_php.h
 create mode 100644 drivers/pci/hotplug/powernv_php_slot.c

-- 
2.1.0