[PATCH] powerpc/powernv: Fix early pci_controller_ops loading.

[Gavin Shan]

On Mon, Apr 27, 2015 at 11:54:26AM +1000, Daniel Axtens wrote:
>Load the PowerNV platform pci controller ops into pci controllers
>after all the operations are loaded into the platform ops struct, not
>before.
>
>Fixes: c88c2a188905cb3077c3c38dc498e7e9f8eebeee

I think it would fix commit 65ebf4b63 ("powerpc/powernv: Move controller ops from ppc_md to controller_ops")
If that's the case, the above line could be replaced with:

Fixes: 65ebf4b63 ("powerpc/powernv: Move controller ops from ppc_md to controller_ops")

>Reported-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
>Signed-off-by: Daniel Axtens <dja at axtens.net>

The changes look good to me.

Reviewed-by: Gavin Shan <gwshan at linux.vnet.ibm.com>

Thanks,
Gavin

>---
> arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>index 920c252..f8bc950 100644
>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
> 		hose->last_busno = 0xff;
> 	}
> 	hose->private_data = phb;
>-	hose->controller_ops = pnv_pci_controller_ops;
> 	phb->hub_id = hub_id;
> 	phb->opal_id = phb_id;
> 	phb->type = ioda_type;
>@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
> 	pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
> 	pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
> 	pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
>+	hose->controller_ops = pnv_pci_controller_ops;
>
> #ifdef CONFIG_PCI_IOV
> 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
>-- 
>2.1.4
>