[PATCH v2] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1

[Jonas Gorski]

Hi Christophe,

On Wed, Apr 22, 2015 at 4:17 PM, Christophe Leroy
<christophe.leroy at c-s.fr> wrote:
> On CPM2, the SPI parameter RAM is dynamically allocated in the
> dualport RAM whereas in CPM1, it is statically allocated to a default
> address with capability to relocate it somewhere else via the use of
> CPM micropatch. The address of the parameter RAM is given by the boot
> loader and expected to be mapped via of_iomap()
>
> In the current implementation, in function fsl_spi_cpm_get_pram()
> there is a confusion between the SPI_BASE register and the base of the
> SPI parameter RAM. Fortunatly, it is working properly with MPC866 and
> MPC885 because they do set SPI_BASE, but on MPC860 and other old
> MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set.
> Also, the parameter RAM is not properly mapped with of_iomap() as it
> should but still gets accessible by chance through the full RAM which
> is mapped from somewhere else.
>
> This patch applies to the SPI driver the same principle as for the
> CPM UART: when the CPM is of type CPM1, we simply do an of_iomap() of
> the area provided via the device tree.
>
> Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
>
> ---
>  v2: Use devm_ioremap_resource() instead of_iomap()

Your subject and commitlog still talk about using of_iomap(), you need
to update them too.


Regards
Jonas