[PATCH v3 1/3] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states

[Jacek Anaszewski]

Hi Vasant, Anshuman,

Thanks for the update.

On 04/20/2015 09:59 AM, Vasant Hegde wrote:
> From: Anshuman Khandual <khandual at linux.vnet.ibm.com>
>
> This patch registers the following two new OPAL interfaces calls
> for the platform LED subsystem. With the help of these new OPAL calls,
> the kernel will be able to get or set the state of various individual
> LEDs on the system at any given location code which is passed through
> the LED specific device tree nodes.
>
> 	(1) OPAL_LEDS_GET_INDICATOR     opal_leds_get_ind
> 	(2) OPAL_LEDS_SET_INDICATOR     opal_leds_set_ind
>
> Signed-off-by: Anshuman Khandual <khandual at linux.vnet.ibm.com>
> Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
> Acked-by: Stewart Smith <stewart at linux.vnet.ibm.com>
> Tested-by: Stewart Smith <stewart at linux.vnet.ibm.com>
> ---
>   arch/powerpc/include/asm/opal-api.h            |   29 +++++++++++++++++++++++-
>   arch/powerpc/include/asm/opal.h                |    5 ++++
>   arch/powerpc/platforms/powernv/opal-wrappers.S |    2 ++
>   3 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index 0321a90..64508eb 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -153,7 +153,9 @@
>   #define OPAL_FLASH_READ				110
>   #define OPAL_FLASH_WRITE			111
>   #define OPAL_FLASH_ERASE			112
> -#define OPAL_LAST				112
> +#define OPAL_LEDS_GET_INDICATOR			114
> +#define OPAL_LEDS_SET_INDICATOR			115
> +#define OPAL_LAST				115
>
>   /* Device tree flags */
>
> @@ -730,6 +732,31 @@ struct opal_i2c_request {
>   	__be64 buffer_ra;		/* Buffer real address */
>   };
>
> +/* LED Mode */
> +#define LED_MODE_LIGHT_PATH	"lightpath"
> +#define LED_MODE_GUIDING_LIGHT	"guidinglight"
> +
> +/* LED type */
> +#define LED_TYPE_IDENTIFY	"identify"
> +#define LED_TYPE_FAULT		"fault"
> +#define LED_TYPE_ATTENTION	"attention"
> +
> +/* LED location */
> +#define LED_LOC_ENCLOSURE	"enclosure"
> +#define LED_LOC_DESCENDENT	"descendent"

These macros should also have POWERNV_LED prefix.

> +enum OpalSlotLedType {
> +	OPAL_SLOT_LED_TYPE_ID = 0,	/* IDENTIFY LED */
> +	OPAL_SLOT_LED_TYPE_FAULT = 1,	/* FAULT LED */
> +	OPAL_SLOT_LED_TYPE_ATTN = 2,	/* System Attention LED */
> +	OPAL_SLOT_LED_TYPE_MAX = 3
> +};
> +
> +enum OpalSlotLedState {
> +	OPAL_SLOT_LED_STATE_OFF = 0,	/* LED is OFF */
> +	OPAL_SLOT_LED_STATE_ON = 1	/* LED is ON */
> +};
> +
>   #endif /* __ASSEMBLY__ */
>
>   #endif /* __OPAL_API_H */
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 042af1a..e06dc7e 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -193,6 +193,11 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
>   		uint64_t *msg_len);
>   int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
>   			 struct opal_i2c_request *oreq);
> +int64_t opal_leds_get_ind(char *loc_code, u64 *led_mask,
> +			  u64 *led_value, u64 *max_led_type);
> +int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask,
> +			  const u64 led_value, u64 *max_led_type);
> +
>
>   int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf,
>   		uint64_t size, uint64_t token);
> diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
> index 4e74037..20d4da4 100644
> --- a/arch/powerpc/platforms/powernv/opal-wrappers.S
> +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
> @@ -295,3 +295,5 @@ OPAL_CALL(opal_i2c_request,			OPAL_I2C_REQUEST);
>   OPAL_CALL(opal_flash_read,			OPAL_FLASH_READ);
>   OPAL_CALL(opal_flash_write,			OPAL_FLASH_WRITE);
>   OPAL_CALL(opal_flash_erase,			OPAL_FLASH_ERASE);
> +OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
> +OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);
>
>


-- 
Best Regards,
Jacek Anaszewski