[v3] dt/bindings: qoriq-clock: Add binding for FMan clock mux

[Scott Wood]

On Tue, 2015-04-14 at 13:56 +0300, Igal.Liberman wrote:
> From: Igal Liberman <Igal.Liberman at freescale.com>
> 
> v3: Addressed feedback from Scott:
> 	- Removed clock specifier description.
> 
> v2: Addressed feedback from Scott:
> 	- Moved the "fman-clk-mux" clock provider details
> 	  under "clocks" property.
> 
> Signed-off-by: Igal Liberman <Igal.Liberman at freescale.com>
> ---
>  .../devicetree/bindings/clock/qoriq-clock.txt      |   17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> index b0d7b73..2bb3b38 100644
> --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> @@ -65,9 +65,10 @@ Required properties:
>  		It takes parent's clock-frequency as its clock.
>  	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
>  	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
> +	* "fsl,fman-clk-mux" for the Frame Manager clock.
>  - #clock-cells: From common clock binding. The number of cells in a
> -	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
> -	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
> +	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0" and
> +	"fsl,fman-clk-mux" clocks or <1> for "fsl,qoriq-core-pll-[1,2].0".
>  	For "fsl,qoriq-core-pll-1.0" clocks, the single
>  	clock-specifier cell may take the following values:
>  	* 0 - equal to the PLL frequency
> @@ -145,6 +146,18 @@ Example for clock block and clock provider:
>  			clocks = <&sysclk>;
>  			clock-output-names = "platform-pll", "platform-pll-div2";
>  		};
> +
> +		fm0clk: fm0-clk-mux {
> +			#clock-cells = <0>;
> +			reg = <0x10 4>
> +			compatible = "fsl,fman-clk-mux";
> +			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, <&pll0 3>,
> +				 <&platform_pll 0>, <&pll1 1>, <&pll1 2>;
> +			clock-names = "pll0", "pll0-div2", "pll0-div3",
> +				      "pll0-div4", "platform-pll", "pll1-div2",
> +				      "pll1-div3";
> +			clock-output-names = "fm0-clk";
> +		};
>  	};
>  };
>  

I don't see this register in the manuals for older DPAA chips, such as
p4080 or p3041.  Is it present but undocumented?  Should I be looking
somewhere other than "Clocking Memory Map"?

-Scott