[PATCH v2 2/3] Remove celleb-only SCC PATA drivers
Daniel Axtens
dja at axtens.net
Tue Apr 14 15:28:45 AEST 2015
The SCC PATA interface is only used by celleb.
celleb has been dropped [1], so drop the drivers.
[1] http://patchwork.ozlabs.org/patch/451730/
CC: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
CC: Tejun Heo <tj at kernel.org>
CC: "David S. Miller" <davem at davemloft.net>
CC: linux-ide at vger.kernel.org
CC: Valentin Rothberg <valentinrothberg at gmail.com>
CC: mpe at ellerman.id.au
CC: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Daniel Axtens <dja at axtens.net>
---
v2: get name of ozlab*s*.org right. Sorry all.
---
drivers/ata/Kconfig | 9 -
drivers/ata/Makefile | 1 -
drivers/ata/pata_scc.c | 1110 ------------------------------------------------
drivers/ide/Kconfig | 9 -
drivers/ide/Makefile | 1 -
drivers/ide/scc_pata.c | 887 --------------------------------------
6 files changed, 2017 deletions(-)
delete mode 100644 drivers/ata/pata_scc.c
delete mode 100644 drivers/ide/scc_pata.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..ee5209f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -729,15 +729,6 @@ config PATA_SC1200
If unsure, say N.
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
config PATA_SCH
tristate "Intel SCH PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b67e995..40f7865 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
-obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
deleted file mode 100644
index 5cd60d6..0000000
--- a/drivers/ata/pata_scc.c
+++ /dev/null
@@ -1,1110 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ata/ata_piix.c:
- * Copyright 2003-2005 Red Hat Inc
- * Copyright 2003-2005 Jeff Garzik
- * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- * Copyright (C) 1998-2000 Andre Hedrick <andre at linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc
- *
- * and drivers/ata/ahci.c:
- * Copyright 2004-2005 Red Hat, Inc.
- *
- * and drivers/ata/libata-core.c:
- * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
- * Copyright 2003-2004 Jeff Garzik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-
-#define DRV_NAME "pata_scc"
-#define DRV_VERSION "0.3"
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
-
-/* PCI BARs */
-#define SCC_CTRL_BAR 0
-#define SCC_BMID_BAR 1
-
-/* offset of CTRL registers */
-#define SCC_CTL_PIOSHT 0x000
-#define SCC_CTL_PIOCT 0x004
-#define SCC_CTL_MDMACT 0x008
-#define SCC_CTL_MCRCST 0x00C
-#define SCC_CTL_SDMACT 0x010
-#define SCC_CTL_SCRCST 0x014
-#define SCC_CTL_UDENVT 0x018
-#define SCC_CTL_TDVHSEL 0x020
-#define SCC_CTL_MODEREG 0x024
-#define SCC_CTL_ECMODE 0xF00
-#define SCC_CTL_MAEA0 0xF50
-#define SCC_CTL_MAEC0 0xF54
-#define SCC_CTL_CCKCTRL 0xFF0
-
-/* offset of BMID registers */
-#define SCC_DMA_CMD 0x000
-#define SCC_DMA_STATUS 0x004
-#define SCC_DMA_TABLE_OFS 0x008
-#define SCC_DMA_INTMASK 0x010
-#define SCC_DMA_INTST 0x014
-#define SCC_DMA_PTERADD 0x018
-#define SCC_REG_CMD_ADDR 0x020
-#define SCC_REG_DATA 0x000
-#define SCC_REG_ERR 0x004
-#define SCC_REG_FEATURE 0x004
-#define SCC_REG_NSECT 0x008
-#define SCC_REG_LBAL 0x00C
-#define SCC_REG_LBAM 0x010
-#define SCC_REG_LBAH 0x014
-#define SCC_REG_DEVICE 0x018
-#define SCC_REG_STATUS 0x01C
-#define SCC_REG_CMD 0x01C
-#define SCC_REG_ALTSTATUS 0x020
-
-/* register value */
-#define TDVHSEL_MASTER 0x00000001
-#define TDVHSEL_SLAVE 0x00000004
-
-#define MODE_JCUSFEN 0x00000080
-
-#define ECMODE_VALUE 0x01
-
-#define CCKCTRL_ATARESET 0x00040000
-#define CCKCTRL_BUFCNT 0x00020000
-#define CCKCTRL_CRST 0x00010000
-#define CCKCTRL_OCLKEN 0x00000100
-#define CCKCTRL_ATACLKOEN 0x00000002
-#define CCKCTRL_LCLKEN 0x00000001
-
-#define QCHCD_IOS_SS 0x00000001
-
-#define QCHSD_STPDIAG 0x00020000
-
-#define INTMASK_MSK 0xD1000012
-#define INTSTS_SERROR 0x80000000
-#define INTSTS_PRERR 0x40000000
-#define INTSTS_RERR 0x10000000
-#define INTSTS_ICERR 0x01000000
-#define INTSTS_BMSINT 0x00000010
-#define INTSTS_BMHE 0x00000008
-#define INTSTS_IOIRQS 0x00000004
-#define INTSTS_INTRQ 0x00000002
-#define INTSTS_ACTEINT 0x00000001
-
-
-/* PIO transfer mode table */
-/* JCHST */
-static const unsigned long JCHSTtbl[2][7] = {
- {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHHT */
-static const unsigned long JCHHTtbl[2][7] = {
- {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHCT */
-static const unsigned long JCHCTtbl[2][7] = {
- {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
- {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
-};
-
-/* DMA transfer mode table */
-/* JCHDCTM/JCHDCTS */
-static const unsigned long JCHDCTxtbl[2][7] = {
- {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
- {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS */
-static const unsigned long JCSTWTxtbl[2][7] = {
- {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
- {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCTSS */
-static const unsigned long JCTSStbl[2][7] = {
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
-};
-
-/* JCENVT */
-static const unsigned long JCENVTtbl[2][7] = {
- {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static const unsigned long JCACTSELtbl[2][7] = {
- {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
-};
-
-static const struct pci_device_id scc_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
- { } /* terminate list */
-};
-
-/**
- * scc_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
-{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
- void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
- unsigned long reg;
- int offset;
-
- reg = in_be32(cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN)
- offset = 1; /* 133MHz */
- else
- offset = 0; /* 100MHz */
-
- reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
- out_be32(piosht_port, reg);
- reg = JCHCTtbl[offset][pio];
- out_be32(pioct_port, reg);
-}
-
-/**
- * scc_set_dmamode - Initialize host controller PATA DMA timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set UDMA mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
-{
- unsigned int udma = adev->dma_mode;
- unsigned int is_slave = (adev->devno != 0);
- u8 speed = udma;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
- void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
- void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
- void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
- void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
- void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
- int offset, idx;
-
- if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
- offset = 1; /* 133MHz */
- else
- offset = 0; /* 100MHz */
-
- if (speed >= XFER_UDMA_0)
- idx = speed - XFER_UDMA_0;
- else
- return;
-
- if (is_slave) {
- out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32(tdvhsel_port,
- (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
- } else {
- out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32(tdvhsel_port,
- (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
- }
- out_be32(udenvt_port,
- JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
-}
-
-unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
-{
- /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
- if (adev->class == ATA_DEV_ATAPI &&
- (mask & (0xE0 << ATA_SHIFT_UDMA))) {
- printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
- mask &= ~(0xE0 << ATA_SHIFT_UDMA);
- }
- return mask;
-}
-
-/**
- * scc_tf_load - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_tf_load().
- */
-
-static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- out_be32(ioaddr->ctl_addr, tf->ctl);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- out_be32(ioaddr->feature_addr, tf->hob_feature);
- out_be32(ioaddr->nsect_addr, tf->hob_nsect);
- out_be32(ioaddr->lbal_addr, tf->hob_lbal);
- out_be32(ioaddr->lbam_addr, tf->hob_lbam);
- out_be32(ioaddr->lbah_addr, tf->hob_lbah);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
-
- if (is_addr) {
- out_be32(ioaddr->feature_addr, tf->feature);
- out_be32(ioaddr->nsect_addr, tf->nsect);
- out_be32(ioaddr->lbal_addr, tf->lbal);
- out_be32(ioaddr->lbam_addr, tf->lbam);
- out_be32(ioaddr->lbah_addr, tf->lbah);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
- }
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- out_be32(ioaddr->device_addr, tf->device);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
-}
-
-/**
- * scc_check_status - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Note: Original code is ata_check_status().
- */
-
-static u8 scc_check_status (struct ata_port *ap)
-{
- return in_be32(ap->ioaddr.status_addr);
-}
-
-/**
- * scc_tf_read - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Note: Original code is ata_sff_tf_read().
- */
-
-static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- tf->command = scc_check_status(ap);
- tf->feature = in_be32(ioaddr->error_addr);
- tf->nsect = in_be32(ioaddr->nsect_addr);
- tf->lbal = in_be32(ioaddr->lbal_addr);
- tf->lbam = in_be32(ioaddr->lbam_addr);
- tf->lbah = in_be32(ioaddr->lbah_addr);
- tf->device = in_be32(ioaddr->device_addr);
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
- tf->hob_feature = in_be32(ioaddr->error_addr);
- tf->hob_nsect = in_be32(ioaddr->nsect_addr);
- tf->hob_lbal = in_be32(ioaddr->lbal_addr);
- tf->hob_lbam = in_be32(ioaddr->lbam_addr);
- tf->hob_lbah = in_be32(ioaddr->lbah_addr);
- out_be32(ioaddr->ctl_addr, tf->ctl);
- ap->last_ctl = tf->ctl;
- }
-}
-
-/**
- * scc_exec_command - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_exec_command().
- */
-
-static void scc_exec_command (struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-
- out_be32(ap->ioaddr.command_addr, tf->command);
- ata_sff_pause(ap);
-}
-
-/**
- * scc_check_altstatus - Read device alternate status reg
- * @ap: port where the device is
- */
-
-static u8 scc_check_altstatus (struct ata_port *ap)
-{
- return in_be32(ap->ioaddr.altstatus_addr);
-}
-
-/**
- * scc_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * Note: Original code is ata_sff_dev_select().
- */
-
-static void scc_dev_select (struct ata_port *ap, unsigned int device)
-{
- u8 tmp;
-
- if (device == 0)
- tmp = ATA_DEVICE_OBS;
- else
- tmp = ATA_DEVICE_OBS | ATA_DEV1;
-
- out_be32(ap->ioaddr.device_addr, tmp);
- ata_sff_pause(ap);
-}
-
-/**
- * scc_set_devctl - Write device control reg
- * @ap: port where the device is
- * @ctl: value to write
- */
-
-static void scc_set_devctl(struct ata_port *ap, u8 ctl)
-{
- out_be32(ap->ioaddr.ctl_addr, ctl);
-}
-
-/**
- * scc_bmdma_setup - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_setup().
- */
-
-static void scc_bmdma_setup (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* load PRD table addr */
- out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = in_be32(mmio + SCC_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- out_be32(mmio + SCC_DMA_CMD, dmactl);
-
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
-}
-
-/**
- * scc_bmdma_start - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_start().
- */
-
-static void scc_bmdma_start (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 dmactl;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* start host DMA transaction */
- dmactl = in_be32(mmio + SCC_DMA_CMD);
- out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
-}
-
-/**
- * scc_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * Note: Original code is ata_devchk().
- */
-
-static unsigned int scc_devchk (struct ata_port *ap,
- unsigned int device)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 nsect, lbal;
-
- ap->ops->sff_dev_select(ap, device);
-
- out_be32(ioaddr->nsect_addr, 0x55);
- out_be32(ioaddr->lbal_addr, 0xaa);
-
- out_be32(ioaddr->nsect_addr, 0xaa);
- out_be32(ioaddr->lbal_addr, 0x55);
-
- out_be32(ioaddr->nsect_addr, 0x55);
- out_be32(ioaddr->lbal_addr, 0xaa);
-
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
-/**
- * scc_wait_after_reset - wait for devices to become ready after reset
- *
- * Note: Original code is ata_sff_wait_after_reset
- */
-
-static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int dev0 = devmask & (1 << 0);
- unsigned int dev1 = devmask & (1 << 1);
- int rc, ret = 0;
-
- /* Spec mandates ">= 2ms" before checking status. We wait
- * 150ms, because that was the magic delay used for ATAPI
- * devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready.
- */
- ata_msleep(ap, 150);
-
- /* always check readiness of the master device */
- rc = ata_sff_wait_ready(link, deadline);
- /* -ENODEV means the odd clown forgot the D7 pulldown resistor
- * and TF status is 0xff, bail out on it too.
- */
- if (rc)
- return rc;
-
- /* if device 1 was found in ata_devchk, wait for register
- * access briefly, then wait for BSY to clear.
- */
- if (dev1) {
- int i;
-
- ap->ops->sff_dev_select(ap, 1);
-
- /* Wait for register access. Some ATAPI devices fail
- * to set nsect/lbal after reset, so don't waste too
- * much time on it. We're gonna wait for !BSY anyway.
- */
- for (i = 0; i < 2; i++) {
- u8 nsect, lbal;
-
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
- if ((nsect == 1) && (lbal == 1))
- break;
- ata_msleep(ap, 50); /* give drive a breather */
- }
-
- rc = ata_sff_wait_ready(link, deadline);
- if (rc) {
- if (rc != -ENODEV)
- return rc;
- ret = rc;
- }
- }
-
- /* is all this really necessary? */
- ap->ops->sff_dev_select(ap, 0);
- if (dev1)
- ap->ops->sff_dev_select(ap, 1);
- if (dev0)
- ap->ops->sff_dev_select(ap, 0);
-
- return ret;
-}
-
-/**
- * scc_bus_softreset - PATA device software reset
- *
- * Note: Original code is ata_bus_softreset().
- */
-
-static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
-
- /* software reset. causes dev0 to be selected */
- out_be32(ioaddr->ctl_addr, ap->ctl);
- udelay(20);
- out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
- udelay(20);
- out_be32(ioaddr->ctl_addr, ap->ctl);
-
- return scc_wait_after_reset(&ap->link, devmask, deadline);
-}
-
-/**
- * scc_softreset - reset host port via ATA SRST
- * @ap: port to reset
- * @classes: resulting classes of attached devices
- * @deadline: deadline jiffies for the operation
- *
- * Note: Original code is ata_sff_softreset().
- */
-
-static int scc_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0;
- int rc;
- u8 err;
-
- DPRINTK("ENTER\n");
-
- /* determine if device 0/1 are present */
- if (scc_devchk(ap, 0))
- devmask |= (1 << 0);
- if (slave_possible && scc_devchk(ap, 1))
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->sff_dev_select(ap, 0);
-
- /* issue bus reset */
- DPRINTK("about to softreset, devmask=%x\n", devmask);
- rc = scc_bus_softreset(ap, devmask, deadline);
- if (rc) {
- ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc);
- return -EIO;
- }
-
- /* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_sff_dev_classify(&ap->link.device[0],
- devmask & (1 << 0), &err);
- if (slave_possible && err != 0x81)
- classes[1] = ata_sff_dev_classify(&ap->link.device[1],
- devmask & (1 << 1), &err);
-
- DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
- return 0;
-}
-
-/**
- * scc_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @qc: Command we are ending DMA for
- */
-
-static void scc_bmdma_stop (struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
- void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
- u32 reg;
-
- while (1) {
- reg = in_be32(bmid_base + SCC_DMA_INTST);
-
- if (reg & INTSTS_SERROR) {
- printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_PRERR) {
- u32 maea0, maec0;
- maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
- maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
- printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_RERR) {
- printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- continue;
- }
-
- if (reg & INTSTS_ICERR) {
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
- printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
- continue;
- }
-
- if (reg & INTSTS_BMSINT) {
- unsigned int classes;
- unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
- printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
- /* TBD: SW reset */
- scc_softreset(&ap->link, &classes, deadline);
- continue;
- }
-
- if (reg & INTSTS_BMHE) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
- continue;
- }
-
- if (reg & INTSTS_ACTEINT) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
- continue;
- }
-
- if (reg & INTSTS_IOIRQS) {
- out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
- continue;
- }
- break;
- }
-
- /* clear start/stop bit */
- out_be32(bmid_base + SCC_DMA_CMD,
- in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_dma_pause(ap); /* dummy read */
-}
-
-/**
- * scc_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- */
-
-static u8 scc_bmdma_status (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
- u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
- u32 int_status = in_be32(mmio + SCC_DMA_INTST);
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
- static int retry = 0;
-
- /* return if IOS_SS is cleared */
- if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
- return host_stat;
-
- /* errata A252,A308 workaround: Step4 */
- if ((scc_check_altstatus(ap) & ATA_ERR)
- && (int_status & INTSTS_INTRQ))
- return (host_stat | ATA_DMA_INTR);
-
- /* errata A308 workaround Step5 */
- if (int_status & INTSTS_IOIRQS) {
- host_stat |= ATA_DMA_INTR;
-
- /* We don't check ATAPI DMA because it is limited to UDMA4 */
- if ((qc->tf.protocol == ATA_PROT_DMA &&
- qc->dev->xfer_mode > XFER_UDMA_4)) {
- if (!(int_status & INTSTS_ACTEINT)) {
- printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
- ap->print_id);
- host_stat |= ATA_DMA_ERR;
- if (retry++)
- ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
- } else
- retry = 0;
- }
- }
-
- return host_stat;
-}
-
-/**
- * scc_data_xfer - Transfer data by PIO
- * @dev: device for this I/O
- * @buf: data buffer
- * @buflen: buffer length
- * @rw: read/write
- *
- * Note: Original code is ata_sff_data_xfer().
- */
-
-static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- struct ata_port *ap = dev->link->ap;
- unsigned int words = buflen >> 1;
- unsigned int i;
- __le16 *buf16 = (__le16 *) buf;
- void __iomem *mmio = ap->ioaddr.data_addr;
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
- for (i = 0; i < words; i++)
- buf16[i] = cpu_to_le16(in_be32(mmio));
- else
- for (i = 0; i < words; i++)
- out_be32(mmio, le16_to_cpu(buf16[i]));
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- __le16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (rw == READ) {
- align_buf[0] = cpu_to_le16(in_be32(mmio));
- memcpy(trailing_buf, align_buf, 1);
- } else {
- memcpy(align_buf, trailing_buf, 1);
- out_be32(mmio, le16_to_cpu(align_buf[0]));
- }
- words++;
- }
-
- return words << 1;
-}
-
-/**
- * scc_postreset - standard postreset callback
- * @ap: the target ata_port
- * @classes: classes of attached devices
- *
- * Note: Original code is ata_sff_postreset().
- */
-
-static void scc_postreset(struct ata_link *link, unsigned int *classes)
-{
- struct ata_port *ap = link->ap;
-
- DPRINTK("ENTER\n");
-
- /* is double-select really necessary? */
- if (classes[0] != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 1);
- if (classes[1] != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 0);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- DPRINTK("EXIT, no device\n");
- return;
- }
-
- /* set up device control */
- out_be32(ap->ioaddr.ctl_addr, ap->ctl);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_irq_clear().
- */
-
-static void scc_irq_clear (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
-}
-
-/**
- * scc_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Allocate space for PRD table using ata_bmdma_port_start().
- * Set PRD table address for PTERADD. (PRD Transfer End Read)
- */
-
-static int scc_port_start (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
- int rc;
-
- rc = ata_bmdma_port_start(ap);
- if (rc)
- return rc;
-
- out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma);
- return 0;
-}
-
-/**
- * scc_port_stop - Undo scc_port_start()
- * @ap: Port to shut down
- *
- * Reset PTERADD.
- */
-
-static void scc_port_stop (struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- out_be32(mmio + SCC_DMA_PTERADD, 0);
-}
-
-static struct scsi_host_template scc_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations scc_pata_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .set_piomode = scc_set_piomode,
- .set_dmamode = scc_set_dmamode,
- .mode_filter = scc_mode_filter,
-
- .sff_tf_load = scc_tf_load,
- .sff_tf_read = scc_tf_read,
- .sff_exec_command = scc_exec_command,
- .sff_check_status = scc_check_status,
- .sff_check_altstatus = scc_check_altstatus,
- .sff_dev_select = scc_dev_select,
- .sff_set_devctl = scc_set_devctl,
-
- .bmdma_setup = scc_bmdma_setup,
- .bmdma_start = scc_bmdma_start,
- .bmdma_stop = scc_bmdma_stop,
- .bmdma_status = scc_bmdma_status,
- .sff_data_xfer = scc_data_xfer,
-
- .cable_detect = ata_cable_80wire,
- .softreset = scc_softreset,
- .postreset = scc_postreset,
-
- .sff_irq_clear = scc_irq_clear,
-
- .port_start = scc_port_start,
- .port_stop = scc_port_stop,
-};
-
-static struct ata_port_info scc_port_info[] = {
- {
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = ATA_PIO4,
- /* No MWDMA */
- .udma_mask = ATA_UDMA6,
- .port_ops = &scc_pata_ops,
- },
-};
-
-/**
- * scc_reset_controller - initialize SCC PATA controller.
- */
-
-static int scc_reset_controller(struct ata_host *host)
-{
- void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
- void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
- void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
- void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
- void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
- void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
- void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
- u32 reg = 0;
-
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_ATACLKOEN;
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
- out_be32(cckctrl_port, reg);
- reg |= CCKCTRL_CRST;
- out_be32(cckctrl_port, reg);
-
- for (;;) {
- reg = in_be32(cckctrl_port);
- if (reg & CCKCTRL_CRST)
- break;
- udelay(5000);
- }
-
- reg |= CCKCTRL_ATARESET;
- out_be32(cckctrl_port, reg);
- out_be32(ecmode_port, ECMODE_VALUE);
- out_be32(mode_port, MODE_JCUSFEN);
- out_be32(intmask_port, INTMASK_MSK);
-
- if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
- printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
- * @ioaddr: IO address structure to be initialized
- * @base: base address of BMID region
- */
-
-static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
-{
- ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
- ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
- ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
- ioaddr->bmdma_addr = base;
- ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
- ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
- ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
- ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
- ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
- ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
- ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
- ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
- ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
- ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
-}
-
-static int scc_host_init(struct ata_host *host)
-{
- struct pci_dev *pdev = to_pci_dev(host->dev);
- int rc;
-
- rc = scc_reset_controller(host);
- if (rc)
- return rc;
-
- rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
-
- pci_set_master(pdev);
-
- return 0;
-}
-
-/**
- * scc_init_one - Register SCC PATA device with kernel services
- * @pdev: PCI device to register
- * @ent: Entry in scc_pci_tbl matching with @pdev
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, or -ERRNO value.
- */
-
-static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- unsigned int board_idx = (unsigned int) ent->driver_data;
- const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
- struct ata_host *host;
- int rc;
-
- ata_print_version_once(&pdev->dev, DRV_VERSION);
-
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
- if (!host)
- return -ENOMEM;
-
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
-
- rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
- host->iomap = pcim_iomap_table(pdev);
-
- ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
- ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
-
- rc = scc_host_init(host);
- if (rc)
- return rc;
-
- return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
- IRQF_SHARED, &scc_sht);
-}
-
-static struct pci_driver scc_pci_driver = {
- .name = DRV_NAME,
- .id_table = scc_pci_tbl,
- .probe = scc_init_one,
- .remove = ata_pci_remove_one,
-#ifdef CONFIG_PM_SLEEP
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
-#endif
-};
-
-module_pci_driver(scc_pci_driver);
-
-MODULE_AUTHOR("Toshiba corp");
-MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a04c49f..39ea67f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -643,15 +643,6 @@ config BLK_DEV_TC86C001
help
This driver adds support for Toshiba TC86C001 GOKU-S chip.
-config BLK_DEV_CELLEB
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PPC_CELLEB
- select BLK_DEV_IDEDMA_PCI
- help
- This driver provides support for the on-board IDE controller on
- Toshiba Cell Reference Board.
- If unsure, say Y.
-
endif
# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index a04ee82..2a8c417 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
-obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o
obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
deleted file mode 100644
index 2a2d188..0000000
--- a/drivers/ide/scc_pata.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ide/pci/siimage.c:
- * Copyright (C) 2001-2002 Andre Hedrick <andre at linux-ide.org>
- * Copyright (C) 2003 Red Hat
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
-
-#define SCC_PATA_NAME "scc IDE"
-
-#define TDVHSEL_MASTER 0x00000001
-#define TDVHSEL_SLAVE 0x00000004
-
-#define MODE_JCUSFEN 0x00000080
-
-#define CCKCTRL_ATARESET 0x00040000
-#define CCKCTRL_BUFCNT 0x00020000
-#define CCKCTRL_CRST 0x00010000
-#define CCKCTRL_OCLKEN 0x00000100
-#define CCKCTRL_ATACLKOEN 0x00000002
-#define CCKCTRL_LCLKEN 0x00000001
-
-#define QCHCD_IOS_SS 0x00000001
-
-#define QCHSD_STPDIAG 0x00020000
-
-#define INTMASK_MSK 0xD1000012
-#define INTSTS_SERROR 0x80000000
-#define INTSTS_PRERR 0x40000000
-#define INTSTS_RERR 0x10000000
-#define INTSTS_ICERR 0x01000000
-#define INTSTS_BMSINT 0x00000010
-#define INTSTS_BMHE 0x00000008
-#define INTSTS_IOIRQS 0x00000004
-#define INTSTS_INTRQ 0x00000002
-#define INTSTS_ACTEINT 0x00000001
-
-#define ECMODE_VALUE 0x01
-
-static struct scc_ports {
- unsigned long ctl, dma;
- struct ide_host *host; /* for removing port from system */
-} scc_ports[MAX_HWIFS];
-
-/* PIO transfer mode table */
-/* JCHST */
-static unsigned long JCHSTtbl[2][7] = {
- {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHHT */
-static unsigned long JCHHTtbl[2][7] = {
- {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHCT */
-static unsigned long JCHCTtbl[2][7] = {
- {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
- {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
-};
-
-
-/* DMA transfer mode table */
-/* JCHDCTM/JCHDCTS */
-static unsigned long JCHDCTxtbl[2][7] = {
- {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
- {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS */
-static unsigned long JCSTWTxtbl[2][7] = {
- {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
- {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCTSS */
-static unsigned long JCTSStbl[2][7] = {
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
-};
-
-/* JCENVT */
-static unsigned long JCENVTtbl[2][7] = {
- {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static unsigned long JCACTSELtbl[2][7] = {
- {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
-};
-
-
-static u8 scc_ide_inb(unsigned long port)
-{
- u32 data = in_be32((void*)port);
- return (u8)data;
-}
-
-static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
- out_be32((void *)hwif->io_ports.command_addr, cmd);
- eieio();
- in_be32((void *)(hwif->dma_base + 0x01c));
- eieio();
-}
-
-static u8 scc_read_status(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)hwif->io_ports.status_addr);
-}
-
-static u8 scc_read_altstatus(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
-}
-
-static u8 scc_dma_sff_read_status(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)(hwif->dma_base + 4));
-}
-
-static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
- out_be32((void *)hwif->io_ports.ctl_addr, ctl);
- eieio();
- in_be32((void *)(hwif->dma_base + 0x01c));
- eieio();
-}
-
-static void scc_ide_insw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_insl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_outb(u8 addr, unsigned long port)
-{
- out_be32((void*)port, addr);
-}
-
-static void
-scc_ide_outsw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-static void
-scc_ide_outsl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-/**
- * scc_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long piosht_port = ctl_base + 0x000;
- unsigned long pioct_port = ctl_base + 0x004;
- unsigned long reg;
- int offset;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
- reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
- out_be32((void __iomem *)piosht_port, reg);
- reg = JCHCTtbl[offset][pio];
- out_be32((void __iomem *)pioct_port, reg);
-}
-
-/**
- * scc_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long mdmact_port = ctl_base + 0x008;
- unsigned long mcrcst_port = ctl_base + 0x00c;
- unsigned long sdmact_port = ctl_base + 0x010;
- unsigned long scrcst_port = ctl_base + 0x014;
- unsigned long udenvt_port = ctl_base + 0x018;
- unsigned long tdvhsel_port = ctl_base + 0x020;
- int is_slave = drive->dn & 1;
- int offset, idx;
- unsigned long reg;
- unsigned long jcactsel;
- const u8 speed = drive->dma_mode;
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
-
- idx = speed - XFER_UDMA_0;
-
- jcactsel = JCACTSELtbl[offset][idx];
- if (is_slave) {
- out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
- jcactsel = jcactsel << 2;
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
- } else {
- out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
- }
- reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
- out_be32((void __iomem *)udenvt_port, reg);
-}
-
-static void scc_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 unit = drive->dn & 1;
- u8 dma_stat = scc_dma_sff_read_status(hwif);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- scc_ide_outb(dma_stat, hwif->dma_base + 4);
-}
-
-/**
- * scc_dma_setup - begin a DMA phase
- * @drive: target device
- * @cmd: command
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers.
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
- u8 dma_stat;
-
- /* fall back to pio! */
- if (ide_build_dmatable(drive, cmd) == 0)
- return 1;
-
- /* PRD table */
- out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
-
- /* specify r/w */
- out_be32((void __iomem *)hwif->dma_base, rw);
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = scc_dma_sff_read_status(hwif);
-
- /* clear INTR & ERROR flags */
- out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
-
- return 0;
-}
-
-static void scc_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_cmd = scc_ide_inb(hwif->dma_base);
-
- /* start DMA */
- scc_ide_outb(dma_cmd | 1, hwif->dma_base);
-}
-
-static int __scc_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat, dma_cmd;
-
- /* get DMA command mode */
- dma_cmd = scc_ide_inb(hwif->dma_base);
- /* stop DMA */
- scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
- /* get DMA status */
- dma_stat = scc_dma_sff_read_status(hwif);
- /* clear the INTR & ERROR bits */
- scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
- /* verify good DMA status */
- return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-/**
- * scc_dma_end - Stop DMA
- * @drive: IDE drive
- *
- * Check and clear INT Status register.
- * Then call __scc_dma_end().
- */
-
-static int scc_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *dma_base = (void __iomem *)hwif->dma_base;
- unsigned long intsts_port = hwif->dma_base + 0x014;
- u32 reg;
- int dma_stat, data_loss = 0;
- static int retry = 0;
-
- /* errata A308 workaround: Step5 (check data loss) */
- /* We don't check non ide_disk because it is limited to UDMA4 */
- if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ATA_ERR) &&
- drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
- reg = in_be32((void __iomem *)intsts_port);
- if (!(reg & INTSTS_ACTEINT)) {
- printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
- drive->name);
- data_loss = 1;
- if (retry++) {
- struct request *rq = hwif->rq;
- ide_drive_t *drive;
- int i;
-
- /* ERROR_RESET and drive->crc_count are needed
- * to reduce DMA transfer mode in retry process.
- */
- if (rq)
- rq->errors |= ERROR_RESET;
-
- ide_port_for_each_dev(i, drive, hwif)
- drive->crc_count++;
- }
- }
- }
-
- while (1) {
- reg = in_be32((void __iomem *)intsts_port);
-
- if (reg & INTSTS_SERROR) {
- printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_PRERR) {
- u32 maea0, maec0;
- unsigned long ctl_base = hwif->config_data;
-
- maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
- maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
-
- printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
-
- out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_RERR) {
- printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_ICERR) {
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-
- printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
- continue;
- }
-
- if (reg & INTSTS_BMSINT) {
- printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
-
- ide_do_reset(drive);
- continue;
- }
-
- if (reg & INTSTS_BMHE) {
- out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
- continue;
- }
-
- if (reg & INTSTS_ACTEINT) {
- out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
- continue;
- }
-
- if (reg & INTSTS_IOIRQS) {
- out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
- continue;
- }
- break;
- }
-
- dma_stat = __scc_dma_end(drive);
- if (data_loss)
- dma_stat |= 2; /* emulate DMA error (to retry command) */
- return dma_stat;
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int scc_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
-
- /* SCC errata A252,A308 workaround: Step4 */
- if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ATA_ERR) &&
- (int_stat & INTSTS_INTRQ))
- return 1;
-
- /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
- if (int_stat & INTSTS_IOIRQS)
- return 1;
-
- return 0;
-}
-
-static u8 scc_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mask = hwif->ultra_mask;
-
- /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
- if ((drive->media != ide_disk) && (mask & 0xE0)) {
- printk(KERN_INFO "%s: limit %s to UDMA4\n",
- SCC_PATA_NAME, drive->name);
- mask = ATA_UDMA4;
- }
-
- return mask;
-}
-
-/**
- * setup_mmio_scc - map CTRL/BMID region
- * @dev: PCI device we are configuring
- * @name: device name
- *
- */
-
-static int setup_mmio_scc (struct pci_dev *dev, const char *name)
-{
- void __iomem *ctl_addr;
- void __iomem *dma_addr;
- int i, ret;
-
- for (i = 0; i < MAX_HWIFS; i++) {
- if (scc_ports[i].ctl == 0)
- break;
- }
- if (i >= MAX_HWIFS)
- return -ENOMEM;
-
- ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
- if (ret < 0) {
- printk(KERN_ERR "%s: can't reserve resources\n", name);
- return ret;
- }
-
- ctl_addr = pci_ioremap_bar(dev, 0);
- if (!ctl_addr)
- goto fail_0;
-
- dma_addr = pci_ioremap_bar(dev, 1);
- if (!dma_addr)
- goto fail_1;
-
- pci_set_master(dev);
- scc_ports[i].ctl = (unsigned long)ctl_addr;
- scc_ports[i].dma = (unsigned long)dma_addr;
- pci_set_drvdata(dev, (void *) &scc_ports[i]);
-
- return 1;
-
- fail_1:
- iounmap(ctl_addr);
- fail_0:
- return -ENOMEM;
-}
-
-static int scc_ide_setup_pci_device(struct pci_dev *dev,
- const struct ide_port_info *d)
-{
- struct scc_ports *ports = pci_get_drvdata(dev);
- struct ide_host *host;
- struct ide_hw hw, *hws[] = { &hw };
- int i, rc;
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i <= 8; i++)
- hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
- hw.irq = dev->irq;
- hw.dev = &dev->dev;
-
- rc = ide_host_add(d, hws, 1, &host);
- if (rc)
- return rc;
-
- ports->host = host;
-
- return 0;
-}
-
-/**
- * init_setup_scc - set up an SCC PATA Controller
- * @dev: PCI device
- * @d: IDE port info
- *
- * Perform the initial set up for this device.
- */
-
-static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d)
-{
- unsigned long ctl_base;
- unsigned long dma_base;
- unsigned long cckctrl_port;
- unsigned long intmask_port;
- unsigned long mode_port;
- unsigned long ecmode_port;
- u32 reg = 0;
- struct scc_ports *ports;
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- goto end;
-
- rc = setup_mmio_scc(dev, d->name);
- if (rc < 0)
- goto end;
-
- ports = pci_get_drvdata(dev);
- ctl_base = ports->ctl;
- dma_base = ports->dma;
- cckctrl_port = ctl_base + 0xff0;
- intmask_port = dma_base + 0x010;
- mode_port = ctl_base + 0x024;
- ecmode_port = ctl_base + 0xf00;
-
- /* controller initialization */
- reg = 0;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_ATACLKOEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_CRST;
- out_be32((void*)cckctrl_port, reg);
-
- for (;;) {
- reg = in_be32((void*)cckctrl_port);
- if (reg & CCKCTRL_CRST)
- break;
- udelay(5000);
- }
-
- reg |= CCKCTRL_ATARESET;
- out_be32((void*)cckctrl_port, reg);
-
- out_be32((void*)ecmode_port, ECMODE_VALUE);
- out_be32((void*)mode_port, MODE_JCUSFEN);
- out_be32((void*)intmask_port, INTMASK_MSK);
-
- rc = scc_ide_setup_pci_device(dev, d);
-
- end:
- return rc;
-}
-
-static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-
- if (valid & IDE_VALID_FEATURE)
- scc_ide_outb(tf->feature, io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- scc_ide_outb(tf->nsect, io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- scc_ide_outb(tf->lbal, io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- scc_ide_outb(tf->lbam, io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- scc_ide_outb(tf->lbah, io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- scc_ide_outb(tf->device, io_ports->device_addr);
-}
-
-static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-
- if (valid & IDE_VALID_ERROR)
- tf->error = scc_ide_inb(io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- tf->nsect = scc_ide_inb(io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- tf->lbal = scc_ide_inb(io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- tf->lbam = scc_ide_inb(io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- tf->lbah = scc_ide_inb(io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- tf->device = scc_ide_inb(io_ports->device_addr);
-}
-
-static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- len++;
-
- if (drive->io_32bit) {
- scc_ide_insl(data_addr, buf, len / 4);
-
- if ((len & 3) >= 2)
- scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- scc_ide_insw(data_addr, buf, len / 2);
-}
-
-static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- len++;
-
- if (drive->io_32bit) {
- scc_ide_outsl(data_addr, buf, len / 4);
-
- if ((len & 3) >= 2)
- scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- scc_ide_outsw(data_addr, buf, len / 2);
-}
-
-/**
- * init_mmio_iops_scc - set up the iops for MMIO
- * @hwif: interface to set up
- *
- */
-
-static void init_mmio_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct scc_ports *ports = pci_get_drvdata(dev);
- unsigned long dma_base = ports->dma;
-
- ide_set_hwifdata(hwif, ports);
-
- hwif->dma_base = dma_base;
- hwif->config_data = ports->ctl;
-}
-
-/**
- * init_iops_scc - set up iops
- * @hwif: interface to set up
- *
- * Do the basic setup for the SCC hardware interface
- * and then do the MMIO setup.
- */
-
-static void init_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- hwif->hwif_data = NULL;
- if (pci_get_drvdata(dev) == NULL)
- return;
- init_mmio_iops_scc(hwif);
-}
-
-static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- return ide_allocate_dma_engine(hwif);
-}
-
-static u8 scc_cable_detect(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-/**
- * init_hwif_scc - set up hwif
- * @hwif: interface to set up
- *
- * We do the basic set up of the interface structure. The SCC
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately.
- */
-
-static void init_hwif_scc(ide_hwif_t *hwif)
-{
- /* PTERADD */
- out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
-
- if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
- hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
- else
- hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
-}
-
-static const struct ide_tp_ops scc_tp_ops = {
- .exec_command = scc_exec_command,
- .read_status = scc_read_status,
- .read_altstatus = scc_read_altstatus,
- .write_devctl = scc_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = scc_tf_load,
- .tf_read = scc_tf_read,
-
- .input_data = scc_input_data,
- .output_data = scc_output_data,
-};
-
-static const struct ide_port_ops scc_port_ops = {
- .set_pio_mode = scc_set_pio_mode,
- .set_dma_mode = scc_set_dma_mode,
- .udma_filter = scc_udma_filter,
- .cable_detect = scc_cable_detect,
-};
-
-static const struct ide_dma_ops scc_dma_ops = {
- .dma_host_set = scc_dma_host_set,
- .dma_setup = scc_dma_setup,
- .dma_start = scc_dma_start,
- .dma_end = scc_dma_end,
- .dma_test_irq = scc_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = scc_dma_sff_read_status,
-};
-
-static const struct ide_port_info scc_chipset = {
- .name = "sccIDE",
- .init_iops = init_iops_scc,
- .init_dma = scc_init_dma,
- .init_hwif = init_hwif_scc,
- .tp_ops = &scc_tp_ops,
- .port_ops = &scc_port_ops,
- .dma_ops = &scc_dma_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .irq_flags = IRQF_SHARED,
- .pio_mask = ATA_PIO4,
- .chipset = ide_pci,
-};
-
-/**
- * scc_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an SCC PATA controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return init_setup_scc(dev, &scc_chipset);
-}
-
-/**
- * scc_remove - pci layer remove entry
- * @dev: PCI device
- *
- * Called by the PCI code when it removes an SCC PATA controller.
- */
-
-static void scc_remove(struct pci_dev *dev)
-{
- struct scc_ports *ports = pci_get_drvdata(dev);
- struct ide_host *host = ports->host;
-
- ide_host_remove(host);
-
- iounmap((void*)ports->dma);
- iounmap((void*)ports->ctl);
- pci_release_selected_regions(dev, (1 << 2) - 1);
- memset(ports, 0, sizeof(*ports));
-}
-
-static const struct pci_device_id scc_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-
-static struct pci_driver scc_pci_driver = {
- .name = "SCC IDE",
- .id_table = scc_pci_tbl,
- .probe = scc_init_one,
- .remove = scc_remove,
-};
-
-static int __init scc_ide_init(void)
-{
- return ide_pci_register_driver(&scc_pci_driver);
-}
-
-static void __exit scc_ide_exit(void)
-{
- pci_unregister_driver(&scc_pci_driver);
-}
-
-module_init(scc_ide_init);
-module_exit(scc_ide_exit);
-
-MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
-MODULE_LICENSE("GPL");
--
2.1.4
More information about the Linuxppc-dev
mailing list