[1/3][PATCH][v2] Device Tree bindings for Freescale TDM controller

[Scott Wood]

On Thu, 2015-04-02 at 16:17 +0530, sandeep at freescale.com wrote:
> From: Sandeep Singh <sandeep at freescale.com>
> 
> This controller is available on many Freescale SOCs like MPC8315, P1020, P1010,
> P1022 and P1024
> 
> Signed-off-by: Sandeep Singh <Sandeep at freescale.com>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> ---
>  Documentation/devicetree/bindings/tdm/fsl-tdm.txt |   65 +++++++++++++++++++++
>  1 files changed, 65 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/tdm/fsl-tdm.txt

Add devicetree at vger.kernel.org to CC for device tree patches.


> diff --git a/Documentation/devicetree/bindings/tdm/fsl-tdm.txt b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
> new file mode 100644
> index 0000000..1258b89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
> @@ -0,0 +1,65 @@
> +=====================================================================
> +TDM Device Tree Binding
> +Copyright (C) 2012 Freescale Semiconductor Inc.
> +
> +NOTE: The bindings described in this document are preliminary
> +and subject to change.

Get rid of this note.  Bindings are expected to be stable ABI once
merged.

> +=====================================================================
> +TDM (Time Division Multiplexing)
> +
> +DESCRIPTION
> +
> +The TDM is full duplex serial port designed to allow various devices including
> +digital signal processors (DSPs) to communicate with a variety of serial devices
> +including industry standard framers, codecs, other DSPs and microprocessors.
> +
> +The below properties describe the device tree bindings for Freescale TDM
> +controller.
> +This TDM controller is available on various Freescale Processors like
> +MPC8313, P1020, P1022 and P1010.
> +
> +PROPERTIES
> +
> +  - compatible
> +      Usage: required
> +      Value type: <string>
> +      Definition: Should contain "fsl,tdm1.0".

What does 1.0 refer to?  Is the TDM block identical on all the chips
that currently have it?  Is this a real version number scheme (public or
otherwise) or something made up for software?

> +  - reg
> +      Usage: required
> +      Definition: A standard property. The first reg specifier describes the
> +          TDM registers, and the second describes the TDM DMAC registers.
> +
> +  - clock-frequency
> +      Usage: optional
> +      Value type: <u32 or u64>
> +      Definition: The frequency at which the TDM block is operating.

It'd be nice if new bindings used clock nodes rather than relying on
U-Boot fixups.

> +  - interrupts
> +      Usage: required
> +      Definition: Definition: Two interrupt specifiers.  The first is TDM
> +          error, and the second is TDM EMAC.
> +
> +  - phy-handle
> +      Usage: optional
> +      Value type: <phandle>
> +      Definition: Phandle of the line controller node or framer node eg. SLIC,
> +          E1/T1 etc.
> +
> +  - fsl,max-time-slots
> +      Usage: required
> +      Value type: <u32>
> +      Definition: Maximum number of 8-bit time slots in one TDM frame.
> +          This is the maximum number which TDM hardware supports.
> +
> +EXAMPLE
> +
> +	tdm at 16000 {
> +		compatible = "fsl,tdm1.0";
> +		reg = <0x16000 0x200 0x2c000 0x2000>;
> +		clock-frequency = <0>;
> +		interrupts = <16 8 62 8>;
> +		phy-handle = <&zarlink1>;
> +		fsl,max-time-slots = <128>;
> +	};

The example refers to a "zarlink1" node but it is not present.  What
does a "line controller or framer node" look like?

-Scott