[PATCH 0/9] powerpc/powernv: Support for fastsleep and winkle

[Shreyas B Prabhu]

Hi Rafael,

On Tuesday 30 September 2014 04:58 AM, Rafael J. Wysocki wrote:
> On Monday, September 29, 2014 03:53:06 PM Shreyas B Prabhu wrote:
>> Hi,
>> Any updates on this patch series?
> 
> I have a couple of patches from there in my tree it seems.  Please have a look
> at linux-pm.git/linux-next and please let me know if that's the case.
> 

I checked linux-pm.git/linux-net (Last commit 067c17382165). None of the patches
in this series are present in the tree. 


> 
>> On Thursday 18 September 2014 08:41 AM, Shreyas B Prabhu wrote:
>>> Hi,
>>>
>>> In this patch series we use winkle for offlined cores. I successfully
>>> tested the working of this with subcore functionality.
>>>
>>> Test scenario was as follows:
>>> 1. Set SMT mode to 1, Set subores-per-core to 1
>>> 2. Offline a core, in this case cpu 32 (sending it to winkle)
>>> 3. Set subcores-per-core to 4
>>> 4. Online the core
>>> 5. Start a guest (Topology 1 core 2 threads) on a subcore, in this case
>>> on cpu 36
>>>
>>> This works without any glitch.
>>>
>>> Thanks,
>>> Shreyas
>>>
>>> On Monday 25 August 2014 11:31 PM, Shreyas B. Prabhu wrote:
>>>> Fast sleep is an idle state, where the core and the L1 and L2
>>>> caches are brought down to a threshold voltage. This also means that
>>>> the communication between L2 and L3 caches have to be fenced. However
>>>> the current P8 chips have a bug wherein this fencing between L2 and
>>>> L3 caches get delayed by a cpu cycle. This can delay L3 response to
>>>> the other cpus if they request for data during this time. Thus they
>>>> would fetch the same data from the memory which could lead to data
>>>> corruption if L3 cache is not flushed.
>>>> Patch 4 adds support to work around this.
>>>>
>>>> 'Deep Winkle' is a deeper idle state where core and private L2 are powered
>>>> off. While it offers higher power savings, it is at the cost of losing
>>>> hypervisor register state and higher latency.
>>>> Patch 5-9 adds support for winkle and uses it for offline cpus.
>>>>
>>>> Patch 1 - Moves parameters required discover idle states to a location 
>>>> common to both cpuidle driver and powernv core code
>>>> Patch 2 - Populates idle state details from device tree
>>>> Patch 3 - Enables cpus to run guest after waking up from fastsleep/winkle
>>>>
>>>>
>>>> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>>>> Cc: Paul Mackerras <paulus at samba.org>
>>>> Cc: Michael Ellerman <mpe at ellerman.id.au>
>>>> Cc: Rafael J. Wysocki <rjw at rjwysocki.net>
>>>> Cc: Srivatsa S. Bhat <srivatsa at MIT.EDU>
>>>> Cc: Preeti U. Murthy <preeti at linux.vnet.ibm.com>
>>>> Cc: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>
>>>> Cc: Rob Herring <robh+dt at kernel.org>
>>>> Cc: Grant Likely <grant.likely at linaro.org>
>>>> Cc: devicetree at vger.kernel.org
>>>> Cc: linux-pm at vger.kernel.org
>>>> Cc: linuxppc-dev at lists.ozlabs.org
>>>>
>>>> Preeti U Murthy (2):
>>>>   cpuidle/powernv: Populate cpuidle state details by querying the
>>>>     device-tree
>>>>   powerpc/powernv/cpuidle: Add workaround to enable fastsleep
>>>>
>>>> Shreyas B. Prabhu (6):
>>>>   powerpc/kvm/book3s_hv: Enable CPUs to run guest after waking up from
>>>>     fast-sleep
>>>>   powerpc/powernv: Add OPAL call to save and restore
>>>>   powerpc: Adding macro for accessing Thread Switch Control Register
>>>>   powerpc/powernv: Add winkle infrastructure
>>>>   powerpc/powernv: Discover and enable winkle
>>>>   powerpc/powernv: Enter deepest supported idle state in offline
>>>>
>>>> Srivatsa S. Bhat (1):
>>>>   powerpc/powernv: Enable Offline CPUs to enter deep idle states
>>>>
>>>>  arch/powerpc/include/asm/machdep.h             |   4 +
>>>>  arch/powerpc/include/asm/opal.h                |  10 ++
>>>>  arch/powerpc/include/asm/paca.h                |   3 +
>>>>  arch/powerpc/include/asm/ppc-opcode.h          |   2 +
>>>>  arch/powerpc/include/asm/processor.h           |   6 +-
>>>>  arch/powerpc/include/asm/reg.h                 |   1 +
>>>>  arch/powerpc/kernel/asm-offsets.c              |   1 +
>>>>  arch/powerpc/kernel/exceptions-64s.S           |  37 ++---
>>>>  arch/powerpc/kernel/idle.c                     |  30 ++++
>>>>  arch/powerpc/kernel/idle_power7.S              |  83 +++++++++-
>>>>  arch/powerpc/platforms/powernv/opal-wrappers.S |   2 +
>>>>  arch/powerpc/platforms/powernv/powernv.h       |   8 +
>>>>  arch/powerpc/platforms/powernv/setup.c         | 217 +++++++++++++++++++++++++
>>>>  arch/powerpc/platforms/powernv/smp.c           |  13 +-
>>>>  arch/powerpc/platforms/powernv/subcore.c       |  15 ++
>>>>  drivers/cpuidle/cpuidle-powernv.c              |  40 ++++-
>>>>  16 files changed, 439 insertions(+), 33 deletions(-)
>>>>
>>
>