bit fields && data tearing

Will Deacon will.deacon at arm.com
Thu Sep 11 20:23:56 EST 2014


On Wed, Sep 10, 2014 at 10:48:06PM +0100, James Bottomley wrote:
> On Tue, 2014-09-09 at 06:40 -0400, Peter Hurley wrote:
> > >> The processor is free to re-order this to:
> > >>
> > >> 	STORE C
> > >> 	STORE B
> > >> 	UNLOCK
> > >>
> > >> That's because the unlock() only guarantees that:
> > >>
> > >> Stores before the unlock in program order are guaranteed to complete
> > >> before the unlock completes. Stores after the unlock _may_ complete
> > >> before the unlock completes.
> > >>
> > >> My point was that even if compiler barriers had the same semantics
> > >> as memory barriers, the situation would be no worse. That is, code
> > >> that is sensitive to memory barriers (like the example I gave above)
> > >> would merely have the same fragility with one-way compiler barriers
> > >> (with respect to the compiler combining writes).
> > >>
> > >> That's what I meant by "no worse than would otherwise exist".
> > > 
> > > Actually, that's not correct.  This is actually deja vu with me on the
> > > other side of the argument.  When we first did spinlocks on PA, I argued
> > > as you did: lock only a barrier for code after and unlock for code
> > > before.  The failing case is that you can have a critical section which
> > > performs an atomically required operation and a following unit which
> > > depends on it being performed.  If you begin the following unit before
> > > the atomic requirement, you may end up losing.  It turns out this kind
> > > of pattern is inherent in a lot of mail box device drivers: you need to
> > > set up the mailbox atomically then poke it.  Setup is usually atomic,
> > > deciding which mailbox to prime and actually poking it is in the
> > > following unit.  Priming often involves an I/O bus transaction and if
> > > you poke before priming, you get a misfire.
> > 
> > Take it up with the man because this was discussed extensively last
> > year and it was decided that unlocks would not be full barriers.
> > Thus the changes to memory-barriers.txt that explicitly note this
> > and the addition of smp_mb__after_unlock_lock() (for two different
> > locks; an unlock followed by a lock on the same lock is a full barrier).
> > 
> > Code that expects ordered writes after an unlock needs to explicitly
> > add the memory barrier.
> 
> I don't really care what ARM does; spin locks are full barriers on
> architectures that need them.  The driver problem we had that detected
> our semi permeable spinlocks was an LSI 53c875 which is enterprise class
> PCI, so presumably not relevant to ARM anyway.

FWIW, unlock is always fully ordered against non-relaxed IO accesses. We
have pretty heavy barriers in readX/writeX to ensure this on ARM/arm64.

PPC do tricks in their unlock to avoid the overhead on each IO access.

Will


More information about the Linuxppc-dev mailing list