TTM placement & caching issue/questions

[Benjamin Herrenschmidt]

Hi folks !

I've been tracking down some problems with the recent DRI on powerpc and
stumbled upon something that doesn't look right, and not necessarily
only for us.

Now it's possible that I haven't fully understood the code here and I
also don't know to what extent some of that behaviour is necessary for
some platforms such as Intel GTT bits.

What I've observed with a simple/dumb (no DMA) driver like AST (but this
probably happens more generally) is that when evicting a BO from VRAM
into System memory, the TTM tries to preserve the existing caching
attributes of the VRAM object.

>From what I can tell, we end up with going from VRAM to System memory
type, and we eventually call ttm_bo_select_caching() to select the
caching option for the target.

This will, from what I can tell, try to use the same caching mode as the
original object:

	if ((cur_placement & caching) != 0)
		result |= (cur_placement & caching);

And cur_placement comes from bo->mem.placement which as far as I can
tell is based on the placement array which the drivers set up.

Now they tend to uniformly setup the placement for System memory as
TTM_PL_MASK_CACHING which enables all caching modes.

So I end up with, for example, my System memory BOs having
TTM_PL_FLAG_CACHED not set (though they also don't have
TTM_PL_FLAG_UNCACHED) and TTM_PL_FLAG_WC.

We don't seem to use the man->default_caching (which will have
TTM_PL_FLAG_CACHED) unless there is no matching bit at all between the
proposed placement and the existing caching mode.

Now this is a problem for several reason that I can think of:

 - On a number of powerpc platforms, such as all our server 64-bit one
for example, it's actually illegal to map system memory non-cached. The
system is fully cache coherent for all possible DMA originators (that we
care about at least) and mapping memory non-cachable while it's mapped
cachable in the linear mapping can cause nasty cache paradox which, when
detected by HW, can checkstop the system.

 - A similar issue exists, afaik, on ARM >= v7, so anything mapped
non-cachable must be removed from the linear mapping explicitly since
otherwise it can be speculatively prefetched into the cache.

 - I don't know about x86, but even then, it looks quite sub-optimal to
map the memory backing of the BOs and access it using a WC rather than a
cachable mapping attribute.

Now, some folks on IRC mentioned that there might be reasons for the
current behaviour as to not change the caching attributes when going
in/out of the GTT on Intel, I don't know how that relates and how that
works, but maybe that should be enforced by having a different placement
mask specifically on those chipsets.

Dave, should we change the various PCI drivers for generally coherent
devices such that the System memory type doesn't allow placements
without CACHED attribute ? Or at least on coherent platforms ? How do
detect that ? Should we have a TTM helper to establish the default
memory placement attributes that "normal PCI" drivers call to set that
up so we can have all the necessary arch ifdefs in one single place, at
least for "classic PCI/PCIe" stuff (AGP might need additional tweaks) ?

Non-PCI and "special" drivers like Intel can use a different set of
placement attributes to represent the requirements of those specific
platforms (mostly thinking of embedded ARM here which under some
circumstances might actually require non-cached mappings).
Or am I missing another part of the puzzle ?

As it-is, things are broken for me even for dumb drivers, and I suspect
to a large extent with radeon and nouveau too, though in some case we
might get away with it most of the time ... until the machine locks up
for some unexplainable reason... This might cause problems on existing
distros such as RHEL7 with our radeon adapters even.

Any suggestion of what's the best approach to fix it ? I'm happy to
produce the patches but I'm not that familiar with the TTM so I would
like to make sure I'm the right track first :-)

Cheers,
Ben.