[RFC 08/11] powerpc: kvm: add a flag in vcore to sync primary with secondry hwthread

Preeti U Murthy preeti at linux.vnet.ibm.com
Mon Oct 27 17:28:20 AEDT 2014


On 10/17/2014 12:59 AM, kernelfans at gmail.com wrote:
> The secondary thread can only jump back to host until primary has set
> up the env. Add host_ready field in kvm_vcore to sync this action.

Do we need to do this? We already synchronize among the sibling threads
when there is a need to enter the host. Today too, the secondaries may
require host kernel's intervention and there is already code in which
under such circumstances, the secondaries set the HDEC of the sibling
threads and wait for the primary to switch context. I see the code under
secondary_too_late. Besides this, do we need anything additional to
synchronize the exit to host path? IIUC, we will need synchronization
only in the entry to guest path.

And of course there will be more guest exits now since the secondaries
are as alive in the host as the primary and will have scheduling
interrupts atleast, forcing them to exit to host. This cannot be
trivially solved unless we can isolate these threads in some way.

Regards
Preeti U Murthy
> 
> Signed-off-by: Liu Ping Fan <pingfank at linux.vnet.ibm.com>
> ---
>  arch/powerpc/include/asm/kvm_host.h     |  3 +++
>  arch/powerpc/kernel/asm-offsets.c       |  3 +++
>  arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 ++++++++++-
>  3 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
> index 9a3355e..1310e03 100644
> --- a/arch/powerpc/include/asm/kvm_host.h
> +++ b/arch/powerpc/include/asm/kvm_host.h
> @@ -305,6 +305,9 @@ struct kvmppc_vcore {
>  	u32 arch_compat;
>  	ulong pcr;
>  	ulong dpdes;		/* doorbell state (POWER8) */
> +#ifdef CONFIG_KVMPPC_ENABLE_SECONDARY
> +	u8 host_ready;
> +#endif
>  	void *mpp_buffer; /* Micro Partition Prefetch buffer */
>  	bool mpp_buffer_is_valid;
>  };
> diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
> index 0faa8fe..9c04ac2 100644
> --- a/arch/powerpc/kernel/asm-offsets.c
> +++ b/arch/powerpc/kernel/asm-offsets.c
> @@ -562,6 +562,9 @@ int main(void)
>  	DEFINE(VCORE_LPCR, offsetof(struct kvmppc_vcore, lpcr));
>  	DEFINE(VCORE_PCR, offsetof(struct kvmppc_vcore, pcr));
>  	DEFINE(VCORE_DPDES, offsetof(struct kvmppc_vcore, dpdes));
> +#ifdef CONFIG_KVMPPC_ENABLE_SECONDARY
> +	DEFINE(VCORE_HOST_READY, offsetof(struct kvmppc_vcore, host_ready));
> +#endif
>  	DEFINE(VCPU_SLB_E, offsetof(struct kvmppc_slb, orige));
>  	DEFINE(VCPU_SLB_V, offsetof(struct kvmppc_slb, origv));
>  	DEFINE(VCPU_SLB_SIZE, sizeof(struct kvmppc_slb));
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index 254038b..89ea16c 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -351,7 +351,11 @@ kvm_do_nap:
>  kvm_secondary_exit_trampoline:
>  
>  	/* all register is free to use, later kvmppc_secondary_stopper_exit set up them*/
> -	//loop-wait for the primary to signal that host env is ready
> +	/* wait until the primary to set up host env */
> +	ld	r5, HSTATE_KVM_VCORE(r13)
> +	ld	r0, VCORE_HOST_READY(r5)
> +	cmp	r0,  //primary is ready?
> +	bne	kvm_secondary_exit_trampoline
>  
>  	LOAD_REG_ADDR(r5, kvmppc_secondary_stopper_exit)
>  	/* fixme, load msr from lpaca stack */
> @@ -1821,6 +1825,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
>  	li	r0, KVM_GUEST_MODE_NONE
>  	stb	r0, HSTATE_IN_GUEST(r13)
>  
> +#ifdef PPCKVM_ENABLE_SECONDARY
> +	/* signal the secondary that host env is ready */
> +	li	r0, 1
> +	stb	r0, VCORE_HOST_READY(r5)
> +#endif
>  	ld	r0, 112+PPC_LR_STKOFF(r1)
>  	addi	r1, r1, 112
>  	mtlr	r0
> 



More information about the Linuxppc-dev mailing list