[PATCH v2 1/2] spi: fsl-spi: Fix parameter ram offset setup for CPM1

[Scott Wood]

On Wed, 2014-10-08 at 18:21 +0200, leroy christophe wrote:
> Le 07/10/2014 02:15, Scott Wood a écrit :
> > On Sat, 2014-10-04 at 14:02 +0200, christophe leroy wrote:
> >> What should it look like if that offset had to be in the device tree ?
> > If the offset is not relocatable or discoverable, it should stay in the
> > device tree.  If you have an old chip you wouldn't have
> > fsl,cpm1-spi-reloc and thus you'd still have "0x3d80 0x30" in reg.
> This index is from the start of the dual port RAM. It is 0x2000 above 
> the start of the CPM area.
> In the DTS, we have:
> 
>      soc at ff000000 {
>          compatible = "fsl,mpc885", "fsl,pq1-soc";
>          #address-cells = <1>;
>          #size-cells = <1>;
>          device_type = "soc";
>          ranges = <0x0 0xff000000 0x28000>;
>          bus-frequency = <0>;
>          clock-frequency = <0>;
> 
>          cpm at 9c0 {
>              #address-cells = <1>;
>              #size-cells = <1>;
>              compatible = "fsl,mpc885-cpm", "fsl,cpm1";
>              ranges;
>              reg = <0x9c0 0x40>;
>              brg-frequency = <0>;
>              interrupts = <0>;    // cpm error interrupt
>              interrupt-parent = <&CPM_PIC>;
> 
>              muram at 2000 {
>                  #address-cells = <1>;
>                  #size-cells = <1>;
>                  ranges = <0x0 0x2000 0x2000>;
> 
>                  data at 0 {
>                      compatible = "fsl,cpm-muram-data";
>                      reg = <0x0 0x1c00>;
>                  };
>              };
> 
>              spi: spi at a80 {
>                  #address-cells = <1>;
>                  #size-cells = <0>;
>                  cell-index = <0>;
>                  compatible = "fsl,spi", "fsl,cpm1-spi";
>                  reg = <0xa80 0x30 0x3d80 0x30>;
>                  interrupts = <5>;
>                  interrupt-parent = <&CPM_PIC>;
>                  mode = "cpu";
> 
> 
> The binding allows me to do an of_iomap() on the parameter RAM, hence to 
> get access to the relocation index which is inside it.
> But if the relocation index is 0, I have to calculate it by myself 
> because the calling function expects it in return.
> The binding is also supposed to tell that the muram is at 0xff002000. 
> But I don't know how I can get this info and use it to calculate the 
> index of my param RAM ? I need to calculate the index which is 1d80 
> (0x3d80 - 0x2000)

What binding are you talking about?  There is no published binding for
this yet.

As for what the driver should do, it should do an of_iomap(), but what
it does with the resulting memory depends on the compatible.  For
fsl,cpm1-spi, the result would be the parameter RAM for the device.  For
fsl,cpm1-spi-reloc and fsl,cpm2-spi, it would be the relocation
register.  The driver would either read the contents of the register, or
write a different offset.

My understanding is that the relocation register would only be zero on
the chips where we'd use fsl,cpm1-spi, not fsl,cpm1-spi-reloc.

-Scott