[PATCH 13/20] powerpc/6xx/linkstation: Use pm_power_off rather than ppc_md.power_off

[Alexander Graf]

The generic power off callback is pm_power_off. Use that one rather than
the powerpc specific ppc_md.power_off.

Signed-off-by: Alexander Graf <agraf at suse.de>
---
 arch/powerpc/platforms/embedded6xx/linkstation.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 455e7c08..e397e36 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -70,6 +70,8 @@ static void __init linkstation_setup_arch(void)
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
 		linkstation_add_bridge(np);
 
+	pm_power_off = linkstation_power_off;
+
 	printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
 	printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
 }
@@ -158,7 +160,6 @@ define_machine(linkstation){
 	.show_cpuinfo 		= linkstation_show_cpuinfo,
 	.get_irq 		= mpic_get_irq,
 	.restart 		= linkstation_restart,
-	.power_off 		= linkstation_power_off,
 	.halt	 		= linkstation_halt,
 	.calibrate_decr 	= generic_calibrate_decr,
 };
-- 
1.8.1.4