[PATCH] powerpc/powernv: Add debugfs file to grab opalv3 trace data
Benjamin Herrenschmidt
benh at kernel.crashing.org
Wed Nov 26 15:10:04 AEDT 2014
This adds files in debugfs that can be used to retrieve the
OPALv3 firmware "live binary traces" which can then be parsed
using a userspace tool.
Mostly from Rusty with some updates by myself (BenH)
Signed-off-by: Rusty Russell <rusty at rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
Reworked from whatever ancient version has been rotting in patchwork,
this one is updated to the actual properties exposed by skiboot nowadays,
endian fixed, and has the ability to set the trace mask.
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-trace-types.h | 58 +++++++
arch/powerpc/platforms/powernv/opal-trace.c | 202 ++++++++++++++++++++++
3 files changed, 261 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/platforms/powernv/opal-trace-types.h
create mode 100644 arch/powerpc/platforms/powernv/opal-trace.c
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index f241acc..315a825 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
obj-y += setup.o opal-wrappers.o opal.o opal-async.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y += opal-msglog.o opal-hmi.o
+obj-y += opal-msglog.o opal-hmi.o opal-trace.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-trace-types.h b/arch/powerpc/platforms/powernv/opal-trace-types.h
new file mode 100644
index 0000000..3bd8ac2
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-trace-types.h
@@ -0,0 +1,58 @@
+/* API for kernel to read trace buffer. */
+#ifndef __OPAL_TRACE_TYPES_H
+#define __OPAL_TRACE_TYPES_H
+
+#define TRACE_REPEAT 1
+#define TRACE_OVERFLOW 2
+#define TRACE_OPAL 3
+#define TRACE_FSP 4
+
+/* One per cpu, plus one for NMIs */
+struct tracebuf {
+ /* Mask to apply to get buffer offset. */
+ __be64 mask;
+ /* This where the buffer starts. */
+ __be64 start;
+ /* This is where writer has written to. */
+ __be64 end;
+ /* This is where the writer wrote to previously. */
+ __be64 last;
+ /* This is where the reader is up to. */
+ __be64 rpos;
+ /* If the last one we read was a repeat, this shows how many. */
+ __be32 last_repeat;
+ /* Maximum possible size of a record. */
+ __be32 max_size;
+
+ char buf[/* TBUF_SZ + max_size */];
+};
+
+/* Common header for all trace entries. */
+struct trace_hdr {
+ __be64 timestamp;
+ u8 type;
+ u8 len_div_8;
+ __be16 cpu;
+ u8 unused[4];
+};
+
+/* Note: all other entries must be at least as large as this! */
+struct trace_repeat {
+ __be64 timestamp; /* Last repeat happened at this timestamp */
+ u8 type; /* == TRACE_REPEAT */
+ u8 len_div_8;
+ __be16 cpu;
+ __be16 prev_len;
+ __be16 num; /* Starts at 1, ie. 1 repeat, or two traces. */
+ /* Note that the count can be one short, if read races a repeat. */
+};
+
+struct trace_overflow {
+ __be64 unused64; /* Timestamp is unused */
+ u8 type; /* == TRACE_OVERFLOW */
+ u8 len_div_8;
+ u8 unused[6]; /* ie. hdr.cpu is indeterminate */
+ __be64 bytes_missed;
+};
+
+#endif /* __OPAL_TRACE_TYPES_H */
diff --git a/arch/powerpc/platforms/powernv/opal-trace.c b/arch/powerpc/platforms/powernv/opal-trace.c
new file mode 100644
index 0000000..6529756
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-trace.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2013 Rusty Russell, IBM Corporation
+ *
+ * Simple debugfs file firmware_trace to read out OPALv3 trace
+ * ringbuffers.
+ */
+#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <asm/debug.h>
+#include <asm/opal.h>
+
+#include "opal-trace-types.h"
+
+static DEFINE_MUTEX(tracelock);
+static struct tracebuf **opal_tb;
+static size_t opal_num_tb;
+static __be64 *opal_tmask_p;
+
+/* Maximum possible size of record (since len is 8 bits). */
+union max_trace {
+ struct trace_hdr hdr;
+ struct trace_overflow overflow;
+ struct trace_repeat repeat;
+ char buf[255 * 8];
+};
+static union max_trace trace;
+
+static bool trace_empty(const struct tracebuf *tb)
+{
+ const struct trace_repeat *rep;
+
+ if (tb->rpos == tb->end)
+ return true;
+
+ /*
+ * If we have a single element only, and it's a repeat buffer
+ * we've already seen every repeat for (yet which may be
+ * incremented in future), we're also empty.
+ */
+ rep = (void *)tb->buf + (be64_to_cpu(tb->rpos & tb->mask));
+ if (be64_to_cpu(tb->end) != be64_to_cpu(tb->rpos) + sizeof(*rep))
+ return false;
+
+ if (rep->type != TRACE_REPEAT)
+ return false;
+
+ if (be16_to_cpu(rep->num) != be32_to_cpu(tb->last_repeat))
+ return false;
+
+ return true;
+}
+
+/* You can't read in parallel, so some locking required in caller. */
+static bool trace_get(union max_trace *t, struct tracebuf *tb)
+{
+ u64 start, rpos;
+
+ if (trace_empty(tb))
+ return false;
+
+again:
+ /*
+ * The actual buffer is slightly larger than tbsize, so this
+ * memcpy is always valid.
+ */
+ memcpy(t, tb->buf + be64_to_cpu(tb->rpos & tb->mask),
+ be32_to_cpu(tb->max_size));
+
+ rmb(); /* read barrier, so we read tb->start after copying record. */
+
+ start = be64_to_cpu(tb->start);
+ rpos = be64_to_cpu(tb->rpos);
+
+ /* Now, was that overwritten? */
+ if (rpos < start) {
+ /* Create overflow record. */
+ t->overflow.unused64 = 0;
+ t->overflow.type = TRACE_OVERFLOW;
+ t->overflow.len_div_8 = sizeof(t->overflow) / 8;
+ t->overflow.bytes_missed = cpu_to_be64(start - rpos);
+ tb->rpos = cpu_to_be64(start);
+ return true;
+ }
+
+ /* Repeat entries need special handling */
+ if (t->hdr.type == TRACE_REPEAT) {
+ u32 num = be16_to_cpu(t->repeat.num);
+
+ /* In case we've read some already... */
+ t->repeat.num = cpu_to_be16(num - be32_to_cpu(tb->last_repeat));
+
+ /* Record how many repeats we saw this time. */
+ tb->last_repeat = cpu_to_be32(num);
+
+ /* Don't report an empty repeat buffer. */
+ if (t->repeat.num == 0) {
+ /*
+ * This can't be the last buffer, otherwise
+ * trace_empty would have returned true.
+ */
+ BUG_ON(be64_to_cpu(tb->end) <= rpos + t->hdr.len_div_8 * 8);
+ /* Skip to next entry. */
+ tb->rpos = cpu_to_be64(rpos + t->hdr.len_div_8 * 8);
+ goto again;
+ }
+ } else {
+ tb->last_repeat = 0;
+ tb->rpos = cpu_to_be64(rpos + t->hdr.len_div_8 * 8);
+ }
+
+ return true;
+}
+
+/* Horrible polling interface, designed for dumping. */
+static ssize_t opal_trace_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t err;
+ unsigned int i;
+
+ err = mutex_lock_interruptible(&tracelock);
+ if (err)
+ return err;
+
+ for (i = 0; i < opal_num_tb; i++) {
+ if (trace_get(&trace, opal_tb[i])) {
+ size_t len = trace.hdr.len_div_8 * 8;
+ if (len > count)
+ len = count;
+ if (copy_to_user(ubuf, &trace, len) != 0)
+ err = -EFAULT;
+ else
+ err = len;
+ break;
+ }
+ }
+
+ mutex_unlock(&tracelock);
+ return err;
+}
+
+static const struct file_operations opal_trace_fops = {
+ .read = opal_trace_read,
+ .open = simple_open,
+ .llseek = noop_llseek,
+};
+
+static int opal_tmask_set(void *data, u64 val)
+{
+ *(__be64 *)data = cpu_to_be64(val);
+ return 0;
+}
+static int opal_tmask_get(void *data, u64 *val)
+{
+ *val = be64_to_cpup((__be64 *)data);
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(opal_tmask, opal_tmask_get, opal_tmask_set, "%llx\n");
+
+static int opal_trace_init(void)
+{
+ const __be64 *traces;
+ int len, i, rc;
+ u64 tmask_phys;
+
+ if (!opal_node)
+ return -ENODEV;
+
+ traces = of_get_property(opal_node, "ibm,opal-traces", &len);
+ if (!traces) {
+ pr_warning("%s: OPAL node property \"ibm,opal-traces\""
+ " not found\n", __func__);
+ return -ENODEV;
+ }
+
+ opal_num_tb = len / (sizeof(__be64) * 2);
+ if (!opal_num_tb) {
+ pr_warning("%s: OPAL traces property has invalid length %i\n",
+ __func__, len);
+ return -EINVAL;
+ }
+ opal_tb = kmalloc(sizeof(*opal_tb) * opal_num_tb, GFP_KERNEL);
+ for (i = 0; i < opal_num_tb; i++)
+ opal_tb[i] = __va(be64_to_cpu(traces[i*2]));
+
+ debugfs_create_file("opal-trace", S_IRUSR, powerpc_debugfs_root,
+ NULL, &opal_trace_fops);
+ rc = of_property_read_u64(opal_node, "ibm,opal-trace-mask",
+ &tmask_phys);
+ if (!rc)
+ opal_tmask_p = __va(tmask_phys);
+ if (opal_tmask_p)
+ debugfs_create_file("opal-trace-mask", S_IRUSR | S_IWUSR,
+ powerpc_debugfs_root, opal_tmask_p,
+ &opal_tmask);
+ return 0;
+}
+module_init(opal_trace_init);
+
More information about the Linuxppc-dev
mailing list