[PATCH 3/8] powerpc/powernv: Export functions to retrieve slot status
Benjamin Herrenschmidt
benh at kernel.crashing.org
Wed Nov 26 10:00:33 AEDT 2014
On Tue, 2014-11-25 at 09:49 +1100, Gavin Shan wrote:
> The patch exports two functions, which base on corresponding OPAL
> APIs to retrieve PCI slot status:
>
> pnv_pci_get_power_status() opal_pci_get_power_status()
> pnv_pci_get_presence_status() opal_pci_get_presence_status()
>
> Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/opal.h | 6 +++-
> arch/powerpc/include/asm/pnv-pci.h | 3 ++
> arch/powerpc/platforms/powernv/eeh-ioda.c | 34 ++---------------------
> arch/powerpc/platforms/powernv/opal-wrappers.S | 2 ++
> arch/powerpc/platforms/powernv/pci.c | 38 ++++++++++++++++++++++++++
> arch/powerpc/platforms/powernv/pci.h | 1 +
> 6 files changed, 51 insertions(+), 33 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index b59811f..b75be1c 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -153,6 +153,8 @@ struct opal_sg_list {
> #define OPAL_HANDLE_HMI 98
> #define OPAL_REGISTER_DUMP_REGION 101
> #define OPAL_UNREGISTER_DUMP_REGION 102
> +#define OPAL_PCI_GET_POWER_STATUS 110
> +#define OPAL_PCI_GET_PRESENCE_STATUS 111
>
> #ifndef __ASSEMBLY__
>
> @@ -905,7 +907,7 @@ int64_t opal_get_epow_status(__be64 *status);
> int64_t opal_set_system_attention_led(uint8_t led_action);
> int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
> __be16 *pci_error_type, __be16 *severity);
> -int64_t opal_pci_poll(uint64_t id);
> +int64_t opal_pci_poll(uint64_t id, uint8_t *val);
> int64_t opal_return_cpu(void);
> int64_t opal_check_token(uint64_t token);
> int64_t opal_reinit_cpus(uint64_t flags);
> @@ -946,6 +948,8 @@ int64_t opal_handle_hmi(void);
> int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
> int64_t opal_unregister_dump_region(uint32_t id);
> int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
> +int64_t opal_pci_get_power_status(uint64_t id, uint8_t *status);
> +int64_t opal_pci_get_presence_status(uint64_t id, uint8_t *status);
>
> /* Internal functions */
> extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
> diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
> index f09a22f..527d97a 100644
> --- a/arch/powerpc/include/asm/pnv-pci.h
> +++ b/arch/powerpc/include/asm/pnv-pci.h
> @@ -13,6 +13,9 @@
> #include <linux/pci.h>
> #include <misc/cxl.h>
>
> +extern int pnv_pci_get_power_status(unsigned int index, unsigned char *status);
> +extern int pnv_pci_get_presence_status(unsigned int index, unsigned char *status);
> +
> int pnv_phb_to_cxl(struct pci_dev *dev);
> int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
> unsigned int virq);
> diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
> index 4bf2fb5..fb66c74 100644
> --- a/arch/powerpc/platforms/powernv/eeh-ioda.c
> +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
> @@ -490,24 +490,6 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
> return ioda_eeh_get_pe_state(pe);
> }
>
> -static s64 ioda_eeh_phb_poll(uint64_t id)
> -{
> - s64 rc = OPAL_HARDWARE;
> -
> - while (1) {
> - rc = opal_pci_poll(id);
> - if (rc <= 0)
> - break;
> -
> - if (system_state < SYSTEM_RUNNING)
> - udelay(1000 * rc);
> - else
> - msleep(rc);
> - }
> -
> - return rc;
> -}
> -
> int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
> {
> struct pnv_phb *phb = hose->private_data;
> @@ -542,13 +524,7 @@ int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
> * need the PCI bus settlement delay.
> */
> rc = opal_pci_reset(phb->opal_id, reset_scope);
> - if (rc > 0)
> - rc = ioda_eeh_phb_poll(phb->opal_id);
> -
> - if (rc != OPAL_SUCCESS)
> - return -EIO;
> -
> - return 0;
> + return pnv_pci_poll(phb->opal_id, rc, NULL);
> }
Patch does too mutch, the factoring out of pnv_pci_poll should be a
separate patch.
> static int __ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
> @@ -641,13 +617,7 @@ static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
> phb = hose->private_data;
> id |= ((phb->opal_id << 16) | (dev->bus->number << 8) | (dev->devfn));
> rc = opal_pci_reset(id, reset_scope);
> - if (rc > 0)
> - rc = ioda_eeh_phb_poll(id);
> -
> - if (rc != OPAL_SUCCESS)
> - return -EIO;
> -
> - return 0;
> + return pnv_pci_poll(id, rc, NULL);
> }
>
> static int pnv_pci_dev_reset_type(struct pci_dev *pdev, void *data)
> diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
> index b6474a1..b2c15ff 100644
> --- a/arch/powerpc/platforms/powernv/opal-wrappers.S
> +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
> @@ -249,3 +249,5 @@ OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
> OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
> OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION);
> OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CXL_MODE);
> +OPAL_CALL(opal_pci_get_power_status, OPAL_PCI_GET_POWER_STATUS);
> +OPAL_CALL(opal_pci_get_presence_status, OPAL_PCI_GET_PRESENCE_STATUS);
> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> index b2187d0..f5bae4f 100644
> --- a/arch/powerpc/platforms/powernv/pci.c
> +++ b/arch/powerpc/platforms/powernv/pci.c
> @@ -45,6 +45,44 @@
> #define cfg_dbg(fmt...) do { } while(0)
> //#define cfg_dbg(fmt...) printk(fmt)
>
> +int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
> +{
> + while (rval > 0) {
> + rval = opal_pci_poll(id, pval);
> + if (rval <= 0)
> + break;
> +
> + if (system_state < SYSTEM_RUNNING)
> + udelay(1000 * rval);
> + else
> + msleep(rval);
> + }
> +
> + return rval ? -EIO : 0;
> +}
Do we need the udelay case still nowadays ? When do we call this early
enough that msleep won't work ?
> +int pnv_pci_get_power_status(unsigned int index, unsigned char *status)
> +{
> + uint64_t id = (0x1ul << 63);
> + long rc;
> +
> + id |= index;
> + rc = opal_pci_get_power_status(id, status);
> + return pnv_pci_poll(id, rc, status);
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_get_power_status);
> +
> +int pnv_pci_get_presence_status(unsigned int index, unsigned char *status)
> +{
> + uint64_t id = (0x1ul << 63);
> + long rc;
> +
> + id |= index;
> + rc = opal_pci_get_presence_status(id, status);
> + return pnv_pci_poll(id, rc, status);
> +}
> +EXPORT_SYMBOL_GPL(pnv_pci_get_presence_status);
> +
> #ifdef CONFIG_PCI_MSI
> static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> {
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 6c02ff8..396fe02 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -217,6 +217,7 @@ extern struct pci_ops pnv_pci_ops;
> extern struct pnv_eeh_ops ioda_eeh_ops;
> #endif
>
> +int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval);
> void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
> unsigned char *log_buff);
> int pnv_pci_cfg_read(struct device_node *dn,
More information about the Linuxppc-dev
mailing list