[PATCH] [v2] power/fsl: add MDIO dt binding for FMan

[Shaohui Xie]

Ping.

Best Regards, 
Shaohui Xie

> -----Original Message-----
> From: shh.xie at gmail.com [mailto:shh.xie at gmail.com]
> Sent: Friday, November 14, 2014 5:53 PM
> To: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org; Wood
> Scott-B07421
> Cc: Medve Emilian-EMMEDVE1; Liberman Igal-B31950; Xie Shaohui-B21989
> Subject: [PATCH] [v2] power/fsl: add MDIO dt binding for FMan
> 
> From: Shaohui Xie <Shaohui.Xie at freescale.com>
> 
> This binding is for FMan MDIO, it covers FMan v2 & FMan v3.
> 
> Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
> ---
> changes in V2:
> addressed comments from Scott in V1.
> 
>  .../devicetree/bindings/powerpc/fsl/fman.txt       | 69
> ++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index edeea16..1523a87 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -7,6 +7,7 @@ CONTENTS
>    - FMan MURAM Node
>    - FMan dTSEC/XGEC/mEMAC Node
>    - FMan IEEE 1588 Node
> +  - FMan MDIO Node
>    - Example
> 
> 
> =========================================================================
> ====
> @@ -357,6 +358,68 @@ ptp-timer at fe000 {
>  };
> 
> 
> =========================================================================
> ====
> +FMan MDIO Node
> +
> +DESCRIPTION
> +
> +The MDIO is a bus to which the PHY devices are connected.
> +
> +PROPERTIES
> +
> +- compatible
> +		Usage: required
> +		Value type: <stringlist>
> +		Definition: A standard property.
> +		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
> +		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
> +		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
> +		FMan v3.
> +
> +- reg
> +		Usage: required
> +		Value type: <prop-encoded-array>
> +		Definition: A standard property.
> +
> +- bus-frequency
> +		Usage: optional
> +		Value type: <u32>
> +		Definition: Specifies external MDIO bus clock speed which is
> +		different from MDIO standard 2.5MHz. Should be defined for
> SoCs
> +		on which the standard one cannot work.
> +
> +- interrupts
> +		Usage: optional
> +		Value type: <prop-encoded-array>
> +		Definition: Event interrupt of external MDIO controller.
> +		1 Gb/s MDIO and 10 Gb/s MDIO has one interrupt respectively.
> +
> +- fsl,fman-internal-mdio
> +		Usage: required for internal MDIO
> +		Value type: boolean
> +		Definition: Fman has internal MDIO for internal PCS(Physical
> +		Coding Sublayer) PHYs and external MDIO for external PHYs.
> +		The settings and programming routines for internal/external
> +		MDIO are different. Must be included for internal MDIO.
> +
> +EXAMPLE
> +
> +Example for FMan v2 external MDIO:
> +
> +mdio at f1000 {
> +	compatible = "fsl,fman-xmdio";
> +	reg = <0xf1000 0x1000>;
> +	bus-frequency = <20000>;
> +};
> +
> +Example for FMan v3 internal MDIO:
> +
> +mdio at f1000 {
> +	compatible = "fsl,fman-memac-mdio";
> +	reg = <0xf1000 0x1000>;
> +	fsl,fman-internal-mdio;
> +};
> +
> +========================================================================
> =====
>  Example
> 
>  fman at 400000 {
> @@ -531,4 +594,10 @@ fman at 400000 {
>  		compatible = "fsl,fman-ptp-timer";
>  		reg = <0xfe000 0x1000>;
>  	};
> +
> +	mdio at f1000 {
> +		compatible = "fsl,fman-xmdio";
> +		reg = <0xf1000 0x1000>;
> +		bus-frequency = <20000>;
> +	};
>  };
> --
> 1.8.4.1