[PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
Neelesh Gupta
neelegup at linux.vnet.ibm.com
Mon Nov 17 04:17:46 AEDT 2014
The patch exposes the available i2c busses on the PowerNV platform
to the kernel and implements the bus driver to support i2c and
smbus commands.
The driver uses the platform device infrastructure to probe the busses
on the platform and registers them with the i2c driver framework.
Signed-off-by: Neelesh Gupta <neelegup at linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
arch/powerpc/include/asm/opal.h | 29 ++
arch/powerpc/platforms/powernv/opal-wrappers.S | 1
arch/powerpc/platforms/powernv/opal.c | 11 +
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1
drivers/i2c/busses/i2c-opal.c | 295 ++++++++++++++++++++++++
6 files changed, 348 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-opal.c
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9124b0e..537807b 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -56,6 +56,14 @@ struct opal_sg_list {
#define OPAL_HARDWARE_FROZEN -13
#define OPAL_WRONG_STATE -14
#define OPAL_ASYNC_COMPLETION -15
+#define OPAL_I2C_TIMEOUT -17
+#define OPAL_I2C_INVALID_CMD -18
+#define OPAL_I2C_LBUS_PARITY -19
+#define OPAL_I2C_BKEND_OVERRUN -20
+#define OPAL_I2C_BKEND_ACCESS -21
+#define OPAL_I2C_ARBT_LOST -22
+#define OPAL_I2C_NACK_RCVD -23
+#define OPAL_I2C_STOP_ERR -24
/* API Tokens (in r0) */
#define OPAL_INVALID_CALL -1
@@ -154,6 +162,7 @@ struct opal_sg_list {
#define OPAL_HANDLE_HMI 98
#define OPAL_REGISTER_DUMP_REGION 101
#define OPAL_UNREGISTER_DUMP_REGION 102
+#define OPAL_I2C_REQUEST 109
#ifndef __ASSEMBLY__
@@ -801,6 +810,24 @@ typedef struct oppanel_line {
uint64_t line_len;
} oppanel_line_t;
+/* OPAL I2C request */
+struct opal_i2c_request {
+ uint8_t type;
+#define OPAL_I2C_RAW_READ 0
+#define OPAL_I2C_RAW_WRITE 1
+#define OPAL_I2C_SM_READ 2
+#define OPAL_I2C_SM_WRITE 3
+ uint8_t flags;
+#define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */
+ uint8_t subaddr_sz; /* Max 4 */
+ uint8_t reserved;
+ __be16 addr; /* 7 or 10 bit address */
+ __be16 reserved2;
+ __be32 subaddr; /* Sub-address if any */
+ __be32 size; /* Data size */
+ __be64 buffer_ra; /* Buffer real address */
+};
+
/* /sys/firmware/opal */
extern struct kobject *opal_kobj;
@@ -963,6 +990,8 @@ int64_t opal_handle_hmi(void);
int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
int64_t opal_unregister_dump_region(uint32_t id);
int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
+int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
+ struct opal_i2c_request *oreq);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index feb549a..4673c02 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -250,3 +250,4 @@ OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI);
OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION);
OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CXL_MODE);
+OPAL_CALL(opal_i2c_request, OPAL_I2C_REQUEST);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index bb90e6e..994975e 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -667,6 +667,14 @@ static void opal_console_create_devs(void)
}
+static void opal_i2c_create_devs(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "ibm,opal-i2c")
+ of_platform_device_create(np, NULL, NULL);
+}
+
static void opal_request_interrupts(void)
{
const __be32 *irqs;
@@ -732,6 +740,9 @@ static int __init opal_init(void)
/* Create console platform devices */
opal_console_create_devs();
+ /* Create i2c platform devices */
+ opal_i2c_create_devs();
+
/* Register OPAL interrupts */
opal_request_interrupts();
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c358..71ad6e1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1044,4 +1044,15 @@ config SCx200_ACB
This support is also available as a module. If so, the module
will be called scx200_acb.
+config I2C_OPAL
+ tristate "IBM OPAL I2C driver"
+ depends on PPC_POWERNV
+ default y
+ help
+ This exposes the PowerNV platform i2c busses to the linux i2c layer,
+ the driver is based on the OPAL interfaces.
+
+ This driver can also be built as a module. If so, the module will be
+ called as i2c-opal.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 78d56c5..350aa86 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -102,5 +102,6 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+obj-$(CONFIG_I2C_OPAL) += i2c-opal.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
new file mode 100644
index 0000000..307d391
--- /dev/null
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -0,0 +1,295 @@
+/*
+ * IBM OPAL I2C driver
+ * Copyright (C) 2014 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/firmware.h>
+#include <asm/opal.h>
+
+static int i2c_opal_translate_error(int rc)
+{
+ switch (rc) {
+ case OPAL_NO_MEM:
+ return -ENOMEM;
+ case OPAL_PARAMETER:
+ return -EINVAL;
+ case OPAL_I2C_ARBT_LOST:
+ return -EAGAIN;
+ case OPAL_I2C_TIMEOUT:
+ return -ETIMEDOUT;
+ case OPAL_I2C_NACK_RCVD:
+ return -ENXIO;
+ case OPAL_I2C_STOP_ERR:
+ return -EBUSY;
+ default:
+ return -EIO;
+ }
+}
+
+static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req)
+{
+ struct opal_msg msg;
+ int token, rc;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ if (token != -ERESTARTSYS)
+ pr_err("Failed to get the async token\n");
+
+ return token;
+ }
+
+ rc = opal_i2c_request(token, bus_id, req);
+ if (rc != OPAL_ASYNC_COMPLETION) {
+ rc = i2c_opal_translate_error(rc);
+ goto exit;
+ }
+
+ rc = opal_async_wait_response(token, &msg);
+ if (rc)
+ goto exit;
+
+ rc = be64_to_cpu(msg.params[1]);
+ if (rc != OPAL_SUCCESS) {
+ rc = i2c_opal_translate_error(rc);
+ goto exit;
+ }
+
+exit:
+ opal_async_release_token(token);
+ return rc;
+}
+
+static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ unsigned long opal_id = (unsigned long)adap->algo_data;
+ struct opal_i2c_request req;
+ int rc, i;
+
+ /* We only support fairly simple combinations here of one
+ * or two messages
+ */
+ memset(&req, 0, sizeof(req));
+ switch(num) {
+ case 0:
+ return 0;
+ case 1:
+ req.type = (msgs[0].flags & I2C_M_RD) ?
+ OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+ req.addr = cpu_to_be16(msgs[0].addr);
+ req.size = cpu_to_be32(msgs[0].len);
+ req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
+ break;
+ case 2:
+ /* For two messages, we basically support only simple
+ * smbus transactions of a write plus a read. We might
+ * want to allow also two writes but we'd have to bounce
+ * the data into a single buffer.
+ */
+ if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
+ return -EOPNOTSUPP;
+ if (msgs[0].len > 4)
+ return -EOPNOTSUPP;
+ if (msgs[0].addr != msgs[1].addr)
+ return -EOPNOTSUPP;
+ req.type = OPAL_I2C_SM_READ;
+ req.addr = cpu_to_be16(msgs[0].addr);
+ req.subaddr_sz = msgs[0].len;
+ for (i = 0; i < msgs[0].len; i++)
+ req.subaddr = (req.subaddr << 8) | msgs[0].buf[i];
+ req.subaddr = cpu_to_be32(req.subaddr);
+ req.size = cpu_to_be32(msgs[1].len);
+ req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ rc = i2c_opal_send_request(opal_id, &req);
+ if (rc)
+ return rc;
+
+ return num;
+}
+
+static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ unsigned long opal_id = (unsigned long)adap->algo_data;
+ struct opal_i2c_request req;
+ u8 local[2];
+ int rc;
+
+ memset(&req, 0, sizeof(req));
+
+ req.addr = cpu_to_be16(addr);
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+ req.size = cpu_to_be32(1);
+ /* Fall through */
+ case I2C_SMBUS_QUICK:
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ req.buffer_ra = cpu_to_be64(__pa(&data->byte));
+ req.size = cpu_to_be32(1);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (!read_write) {
+ local[0] = data->word & 0xff;
+ local[1] = (data->word >> 8) & 0xff;
+ }
+ req.buffer_ra = cpu_to_be64(__pa(local));
+ req.size = cpu_to_be32(2);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ req.buffer_ra = cpu_to_be64(__pa(&data->block[1]));
+ req.size = cpu_to_be32(data->block[0]);
+ req.subaddr = cpu_to_be32(command);
+ req.subaddr_sz = 1;
+ req.type = (read_write == I2C_SMBUS_READ) ?
+ OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc = i2c_opal_send_request(opal_id, &req);
+ if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+
+ return rc;
+}
+
+static u32 i2c_opal_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm i2c_opal_algo = {
+ .master_xfer = i2c_opal_master_xfer,
+ .smbus_xfer = i2c_opal_smbus_xfer,
+ .functionality = i2c_opal_func,
+};
+
+static int i2c_opal_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ const char *pname;
+ u32 opal_id;
+ int rc;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id);
+ if (rc) {
+ dev_err(&pdev->dev, "Missing ibm,opal-id property !\n");
+ return -EIO;
+ }
+
+ adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL);
+ if (!adapter)
+ return -ENOMEM;
+
+ adapter->algo = &i2c_opal_algo;
+ adapter->algo_data = (void *)(unsigned long)opal_id;
+ adapter->dev.parent = &pdev->dev;
+ adapter->dev.of_node = of_node_get(pdev->dev.of_node);
+ pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
+ if (pname)
+ strlcpy(adapter->name, pname, sizeof(adapter->name));
+ else
+ strlcpy(adapter->name, "opal", sizeof(adapter->name));
+
+ platform_set_drvdata(pdev, adapter);
+ rc = i2c_add_adapter(adapter);
+ if (rc)
+ dev_err(&pdev->dev, "Failed to register the i2c adapter\n");
+
+ return rc;
+}
+
+static int i2c_opal_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(adapter);
+
+ return 0;
+}
+
+static const struct of_device_id i2c_opal_of_match[] = {
+ {
+ .compatible = "ibm,opal-i2c",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2c_opal_of_match);
+
+static struct platform_driver i2c_opal_driver = {
+ .probe = i2c_opal_probe,
+ .remove = i2c_opal_remove,
+ .driver = {
+ .name = "i2c-opal",
+ .owner = THIS_MODULE,
+ .of_match_table = i2c_opal_of_match,
+ },
+};
+
+static int __init i2c_opal_init(void)
+{
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return -ENODEV;
+
+ return platform_driver_register(&i2c_opal_driver);
+}
+module_init(i2c_opal_init);
+
+static void __exit i2c_opal_exit(void)
+{
+ return platform_driver_unregister(&i2c_opal_driver);
+}
+module_exit(i2c_opal_exit);
+
+MODULE_AUTHOR("Neelesh Gupta <neelegup at linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM OPAL I2C driver");
+MODULE_LICENSE("GPL");
More information about the Linuxppc-dev
mailing list