[PATCH] usb: phy: fsl: Fix build errors
Peter Chen
peter.chen at freescale.com
Thu Nov 13 16:05:15 AEDT 2014
On Wed, Nov 12, 2014 at 08:39:06AM -0600, Felipe Balbi wrote:
> commit e47d925 (usb: move the OTG state from
> the USB PHY to the OTG structure) moved the
> OTG state from struct usb_phy to struct usb_otg.
>
> Unfortunately, even though I fixed quite a few
> build regressions with that patch already, this
> one was still missing.
>
> Note that this driver still has other randconfig
> build problems which I'll leave for driver author
> to fix, as that's less trivial.
Add more guys who may use this driver.
>
> Reported-by: Fengguang Wu <fengguang.wu at intel.com>
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> ---
>
> The following build error are left for Freescale folks
> since they seem to be a broken for quite a long time.
>
> drivers/usb/phy/phy-fsl-usb.c: In function ‘usb_otg_start’:
> drivers/usb/phy/phy-fsl-usb.c:918:3: error: ‘_fsl_readl’ undeclared (first use in this function)
> _fsl_readl = _fsl_readl_be;
> ^
> drivers/usb/phy/phy-fsl-usb.c:918:3: note: each undeclared identifier is reported only once for each function it appears in
> drivers/usb/phy/phy-fsl-usb.c:918:16: error: ‘_fsl_readl_be’ undeclared (first use in this function)
> _fsl_readl = _fsl_readl_be;
> ^
> drivers/usb/phy/phy-fsl-usb.c:919:3: error: ‘_fsl_writel’ undeclared (first use in this function)
> _fsl_writel = _fsl_writel_be;
> ^
> drivers/usb/phy/phy-fsl-usb.c:919:17: error: ‘_fsl_writel_be’ undeclared (first use in this function)
> _fsl_writel = _fsl_writel_be;
> ^
> drivers/usb/phy/phy-fsl-usb.c:921:16: error: ‘_fsl_readl_le’ undeclared (first use in this function)
> _fsl_readl = _fsl_readl_le;
> ^
> drivers/usb/phy/phy-fsl-usb.c:922:17: error: ‘_fsl_writel_le’ undeclared (first use in this function)
> _fsl_writel = _fsl_writel_le;
> ^
> drivers/usb/phy/phy-fsl-usb.c | 14 +++++++-------
> drivers/usb/phy/phy-fsl-usb.h | 2 +-
> 2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
> index b7f36b2..ab38aa3 100644
> --- a/drivers/usb/phy/phy-fsl-usb.c
> +++ b/drivers/usb/phy/phy-fsl-usb.c
> @@ -274,7 +274,7 @@ void b_srp_end(unsigned long foo)
> fsl_otg_dischrg_vbus(0);
> srp_wait_done = 1;
>
> - if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) &&
> + if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
> fsl_otg_dev->fsm.b_sess_vld)
> fsl_otg_dev->fsm.b_srp_done = 1;
> }
> @@ -624,7 +624,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
> /* Mini-A cable connected */
> struct otg_fsm *fsm = &otg_dev->fsm;
>
> - otg.state = OTG_STATE_UNDEFINED;
> + otg->state = OTG_STATE_UNDEFINED;
> fsm->protocol = PROTO_UNDEF;
> }
> }
> @@ -682,7 +682,7 @@ static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
> {
> if (!fsl_otg_dev)
> return -ENODEV;
> - if (phy->otg.state == OTG_STATE_B_PERIPHERAL)
> + if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
> pr_info("FSL OTG: Draw %d mA\n", mA);
>
> return 0;
> @@ -715,7 +715,7 @@ static int fsl_otg_start_srp(struct usb_otg *otg)
> {
> struct fsl_otg *otg_dev;
>
> - if (!otg || otg.state != OTG_STATE_B_IDLE)
> + if (!otg || otg->state != OTG_STATE_B_IDLE)
> return -ENODEV;
>
> otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
> @@ -990,10 +990,10 @@ int usb_otg_start(struct platform_device *pdev)
> * Also: record initial state of ID pin
> */
> if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
> - p_otg->phy->otg.state = OTG_STATE_UNDEFINED;
> + p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
> p_otg->fsm.id = 1;
> } else {
> - p_otg->phy->otg.state = OTG_STATE_A_IDLE;
> + p_otg->phy.otg->state = OTG_STATE_A_IDLE;
> p_otg->fsm.id = 0;
> }
>
> @@ -1048,7 +1048,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
> /* State */
> t = scnprintf(next, size,
> "OTG state: %s\n\n",
> - usb_otg_state_string(fsl_otg_dev->phy.state));
> + usb_otg_state_string(fsl_otg_dev->phy.otg->state));
> size -= t;
> next += t;
>
> diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
> index 5986c96..2314995 100644
> --- a/drivers/usb/phy/phy-fsl-usb.h
> +++ b/drivers/usb/phy/phy-fsl-usb.h
> @@ -298,7 +298,7 @@
> /* SE0 Time Before SRP */
> #define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */
>
> -#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate)
> +#define SET_OTG_STATE(phy, newstate) ((phy)->otg->state = newstate)
>
> struct usb_dr_mmap {
> /* Capability register */
> --
> 2.1.0.GIT
>
--
Best Regards,
Peter Chen
More information about the Linuxppc-dev
mailing list