[PATCH v7 3/3] drivers/vfio: EEH support for VFIO PCI device

Gavin Shan gwshan at linux.vnet.ibm.com
Thu May 29 10:05:43 EST 2014


On Wed, May 28, 2014 at 10:32:11AM -0600, Alex Williamson wrote:
>On Wed, 2014-05-28 at 10:55 +1000, Gavin Shan wrote:
>> On Tue, May 27, 2014 at 12:15:27PM -0600, Alex Williamson wrote:
>> >On Tue, 2014-05-27 at 18:40 +1000, Gavin Shan wrote:
>> >> The patch adds new IOCTL commands for sPAPR VFIO container device
>> >> to support EEH functionality for PCI devices, which have been passed
>> >> through from host to somebody else via VFIO.
>> >> 
>> >> Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
>> >> ---
>> >>  Documentation/vfio.txt              | 92 ++++++++++++++++++++++++++++++++++++-
>> >>  drivers/vfio/pci/Makefile           |  1 +
>> >>  drivers/vfio/pci/vfio_pci.c         | 20 +++++---
>> >>  drivers/vfio/pci/vfio_pci_eeh.c     | 46 +++++++++++++++++++
>> >>  drivers/vfio/pci/vfio_pci_private.h |  5 ++
>> >>  drivers/vfio/vfio_iommu_spapr_tce.c | 85 ++++++++++++++++++++++++++++++++++
>> >>  include/uapi/linux/vfio.h           | 66 ++++++++++++++++++++++++++
>> >>  7 files changed, 308 insertions(+), 7 deletions(-)
>> >>  create mode 100644 drivers/vfio/pci/vfio_pci_eeh.c
>> >> 
>> >> diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
>> >> index b9ca023..d890fed 100644
>> >> --- a/Documentation/vfio.txt
>> >> +++ b/Documentation/vfio.txt
>> >> @@ -305,7 +305,15 @@ faster, the map/unmap handling has been implemented in real mode which provides
>> >>  an excellent performance which has limitations such as inability to do
>> >>  locked pages accounting in real time.
>> >>  
>> >> -So 3 additional ioctls have been added:
>> >> +4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O
>> >> +subtree that can be treated as a unit for the purposes of partitioning and
>> >> +error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
>> >> +function of a multi-function IOA, or multiple IOAs (possibly including switch
>> >> +and bridge structures above the multiple IOAs). PPC64 guests detect PCI errors
>> >> +and recover from them via EEH RTAS services, which works on the basis of
>> >> +additional ioctl commands.
>> >> +
>> >> +So 7 additional ioctls have been added:
>> >>  
>> >>  	VFIO_IOMMU_SPAPR_TCE_GET_INFO - returns the size and the start
>> >>  		of the DMA window on the PCI bus.
>> >> @@ -316,6 +324,17 @@ So 3 additional ioctls have been added:
>> >>  
>> >>  	VFIO_IOMMU_DISABLE - disables the container.
>> >>  
>> >> +	VFIO_EEH_PE_SET_OPTION - enables or disables EEH functionality on the
>> >> +		specified device. Also, it can be used to remove IO or DMA
>> >> +		stopped state on the frozen PE.
>> >> +
>> >> +	VFIO_EEH_PE_GET_STATE - retrieve PE's state: frozen or normal state.
>> >> +
>> >> +	VFIO_EEH_PE_RESET - do PE reset, which is one of the major steps for
>> >> +		error recovering.
>> >> +
>> >> +	VFIO_EEH_PE_CONFIGURE - configure the PCI bridges after PE reset. It's
>> >> +		one of the major steps for error recoverying.
>> >>  
>> >>  The code flow from the example above should be slightly changed:
>> >>  
>> >> @@ -346,6 +365,77 @@ The code flow from the example above should be slightly changed:
>> >>  	ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map);
>> >>  	.....
>> >>  
>> >> +Based on the initial example we have, the following piece of code could be
>> >> +reference for EEH setup and error handling:
>> >> +
>> >> +	struct vfio_eeh_pe_set_option option = { .argsz = sizeof(option) };
>> >> +	struct vfio_eeh_pe_get_state state = { .argsz = sizeof(state) };
>> >> +	struct vfio_eeh_pe_reset reset = { .argsz = sizeof(reset) };
>> >> +	struct vfio_eeh_pe_configure configure = { .argsz = sizeof(configure) };
>> >> +
>> >> +	....
>> >> +
>> >> +	/* Get a file descriptor for the device */
>> >> +	device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0");
>> >> +
>> >> +	/* Enable the EEH functionality on the device */
>> >> +	option.option = VFIO_EEH_PE_SET_OPT_ENABLE;
>> >> +	ioctl(container, VFIO_EEH_PE_SET_OPTION, &option);
>> >> +
>> >> +	/* You're suggested to create additional data struct to represent
>> >> +	 * PE, and put child devices belonging to same IOMMU group to the
>> >> +	 * PE instance for later reference.
>> >> +	 */
>> >> +
>> >> +	/* Check the PE's state and make sure it's in functional state */
>> >> +	ioctl(container, VFIO_EEH_PE_GET_STATE, &state);
>> >> +
>> >> +	/* Save device's state. pci_save_state() would be good enough
>> >> +	 * as an example.
>> >> +	 */
>> >> +
>> >> +	/* Test and setup the device */
>> >> +	ioctl(device, VFIO_DEVICE_GET_INFO, &device_info);
>> >> +
>> >> +	....
>> >> +
>> >> +	/* When 0xFF's returned from reading PCI config space or IO BARs
>> >> +	 * of the PCI device. Check the PE state to see if that has been
>> >> +	 * frozen.
>> >> +	 */
>> >> +	ioctl(container, VFIO_EEH_PE_GET_STATE, &state);
>> >> +
>> >> +	/* Waiting for pending PCI transactions to be completed and don't
>> >> +	 * produce any more PCI traffic from/to the affected PE until
>> >> +	 * recovery is finished.
>> >> +	 */
>> >> +
>> >> +	/* Enable IO for the affected PE and collect logs. Usually, the
>> >> +	 * standard part of PCI config space, AER registers are dumped
>> >> +	 * as logs for further analysis.
>> >> +	 */
>> >> +	option.option = VFIO_EEH_PE_SET_OPT_IO;
>> >> +	ioctl(container, VFIO_EEH_PE_SET_OPTION, &option);
>> >> +
>> >> +	/* Issue PE reset */
>> >> +	reset.option = VFIO_EEH_PE_RESET_HOT;
>> >> +	ioctl(container, VFIO_EEH_PE_RESET, &reset);
>> >> +	reset.option = VFIO_EEH_PE_RESET_DEACTIVATE;
>> >> +	ioctl(container, VFIO_EEH_PE_RESET, &reset);
>> >> +
>> >> +	/* Configure the PCI bridges for the affected PE */
>> >> +	ioctl(container, VFIO_EEH_PE_CONFIGURE, &configure);
>> >> +
>> >> +	/* Restored state we saved at initialization time. pci_restore_state()
>> >> +	 * is good enough as an example.
>> >> +	 */
>> >> +
>> >> +	/* Hopefully, error is recovered successfully. Now, you can resume to
>> >> +	 * start PCI traffic to/from the affected PE.
>> >> +	 */
>> >> +
>> >> +	....
>> >> +
>> >>  -------------------------------------------------------------------------------
>> >>  
>> >>  [1] VFIO was originally an acronym for "Virtual Function I/O" in its
>> >> diff --git a/drivers/vfio/pci/Makefile b/drivers/vfio/pci/Makefile
>> >> index 1310792..faad885 100644
>> >> --- a/drivers/vfio/pci/Makefile
>> >> +++ b/drivers/vfio/pci/Makefile
>> >> @@ -1,4 +1,5 @@
>> >>  
>> >>  vfio-pci-y := vfio_pci.o vfio_pci_intrs.o vfio_pci_rdwr.o vfio_pci_config.o
>> >> +vfio-pci-y += vfio_pci_eeh.o
>> >
>> >Why do we build this w/o CONFIG_EEH?  Can't we define the functions as
>> >static inline in the header in that case?
>> >
>> 
>> Ok. Will do in next revision.
>> 
>> >>  obj-$(CONFIG_VFIO_PCI) += vfio-pci.o
>> >> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
>> >> index 7ba0424..7c8d26a 100644
>> >> --- a/drivers/vfio/pci/vfio_pci.c
>> >> +++ b/drivers/vfio/pci/vfio_pci.c
>> >> @@ -156,8 +156,10 @@ static void vfio_pci_release(void *device_data)
>> >>  {
>> >>  	struct vfio_pci_device *vdev = device_data;
>> >>  
>> >> -	if (atomic_dec_and_test(&vdev->refcnt))
>> >> +	if (atomic_dec_and_test(&vdev->refcnt)) {
>> >> +		vfio_pci_eeh_release(vdev->pdev);
>> >>  		vfio_pci_disable(vdev);
>> >> +	}
>> >>  
>> >>  	module_put(THIS_MODULE);
>> >>  }
>> >> @@ -165,19 +167,25 @@ static void vfio_pci_release(void *device_data)
>> >>  static int vfio_pci_open(void *device_data)
>> >>  {
>> >>  	struct vfio_pci_device *vdev = device_data;
>> >> +	int ret;
>> >>  
>> >>  	if (!try_module_get(THIS_MODULE))
>> >>  		return -ENODEV;
>> >>  
>> >>  	if (atomic_inc_return(&vdev->refcnt) == 1) {
>> >> -		int ret = vfio_pci_enable(vdev);
>> >> -		if (ret) {
>> >> -			module_put(THIS_MODULE);
>> >> -			return ret;
>> >> -		}
>> >> +		ret = vfio_pci_enable(vdev);
>> >> +		if (ret)
>> >> +			goto error;
>> >> +
>> >> +		ret = vfio_pci_eeh_open(vdev->pdev);
>> >> +		if (ret)
>> >> +			goto error;
>> >>  	}
>> >>  
>> >>  	return 0;
>> >> +error:
>> >> +	module_put(THIS_MODULE);
>> >> +	return ret;
>> >>  }
>> >>  
>> >>  static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
>> >> diff --git a/drivers/vfio/pci/vfio_pci_eeh.c b/drivers/vfio/pci/vfio_pci_eeh.c
>> >> new file mode 100644
>> >> index 0000000..9c25207
>> >> --- /dev/null
>> >> +++ b/drivers/vfio/pci/vfio_pci_eeh.c
>> >> @@ -0,0 +1,46 @@
>> >> +/*
>> >> + * EEH functionality support for VFIO PCI devices.
>> >> + *
>> >> + * Copyright Gavin Shan, IBM Corporation 2014.
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or modify
>> >> + * it under the terms of the GNU General Public License version 2 as
>> >> + * published by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/device.h>
>> >> +#include <linux/eventfd.h>
>> >> +#include <linux/file.h>
>> >> +#include <linux/interrupt.h>
>> >> +#include <linux/iommu.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/mutex.h>
>> >> +#include <linux/notifier.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/pm_runtime.h>
>> >> +#include <linux/slab.h>
>> >> +#include <linux/types.h>
>> >> +#include <linux/uaccess.h>
>> >> +#include <linux/vfio.h>
>> >
>> >Cleanup the includes
>> >
>> 
>> Ok. Will do in next revision.
>> 
>> >> +#ifdef CONFIG_EEH
>> >> +#include <asm/eeh.h>
>> >> +#endif
>> >
>> >This shouldn't even be compiles w/o CONFIG_EEH
>> >
>> 
>> Yeah. Will fix in next revision as you suggested.
>> 
>> >> +
>> >> +#include "vfio_pci_private.h"
>> >> +
>> >> +int vfio_pci_eeh_open(struct pci_dev *pdev)
>> >> +{
>> >> +	int ret = 0;
>> >> +
>> >> +#ifdef CONFIG_EEH
>> >> +	ret = eeh_dev_open(pdev);
>> >> +#endif
>> >> +	return ret;
>> >> +}
>> >> +
>> >> +void vfio_pci_eeh_release(struct pci_dev *pdev)
>> >> +{
>> >> +#ifdef CONFIG_EEH
>> >> +	eeh_dev_release(pdev);
>> >> +#endif
>> >> +}
>> >> diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
>> >> index 9c6d5d0..c3cbe40 100644
>> >> --- a/drivers/vfio/pci/vfio_pci_private.h
>> >> +++ b/drivers/vfio/pci/vfio_pci_private.h
>> >> @@ -90,4 +90,9 @@ extern void vfio_pci_virqfd_exit(void);
>> >>  
>> >>  extern int vfio_config_init(struct vfio_pci_device *vdev);
>> >>  extern void vfio_config_free(struct vfio_pci_device *vdev);
>> >> +
>> >> +/* EEH stub */
>> >> +extern int vfio_pci_eeh_open(struct pci_dev *pdev);
>> >> +extern void vfio_pci_eeh_release(struct pci_dev *pdev);
>> >
>> >The #ifdef with static inlines should be here.
>> >
>> 
>> thanks for the detailed comments.
>> 
>> >> +
>> >>  #endif /* VFIO_PCI_PRIVATE_H */
>> >> diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> index a84788b..666691b 100644
>> >> --- a/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> +++ b/drivers/vfio/vfio_iommu_spapr_tce.c
>> >> @@ -21,6 +21,9 @@
>> >>  #include <linux/vfio.h>
>> >>  #include <asm/iommu.h>
>> >>  #include <asm/tce.h>
>> >> +#ifdef CONFIG_EEH
>> >> +#include <asm/eeh.h>
>> >> +#endif
>> >
>> >Now we're infecting another file with EEH, can't we put it in a central
>> >location for vfio?
>> 
>> How about something like this:
>> 
>> - Create drivers/vfio/vfio_eeh.c and it will be built when having CONFIG_EEH
>> - Declare all EEH functions in include/linux/vfio.h (it's the only central
>>   header file I can find except you have a better one).
>> 
>> #ifdef CONFIG_EEH
>> extern int vfio_pci_eeh_open(struct pci_dev *pdev);
>> extern void vfio_pci_eeh_release(struct pci_dev *pdev);
>> extern long vfio_iommu_spapr_eeh_ioctl(struct iommu_table *tbl,
>> 				       unsigned int cmd, unsigned long arg); 
>> #else
>> static int vfio_pci_eeh_open(struct pci_dev *pdev)
>> {
>> 	return 0;
>> }
>> 
>> static void vfio_pci_eeh_release(struct pci_dev *pdev)
>> {
>> }
>> 
>> static inline vfio_iommu_spapr_eeh_ioctl(struct iommu_table *tbl,
>> 					 unsigned int cmd, unsigned long arg);
>> {
>> 	return -ENOTTY;
>> }
>> #endif
>
>Seems like an improvement
>

So I'll include the change in next revision.

>> >>  
>> >>  #define DRIVER_VERSION  "0.1"
>> >>  #define DRIVER_AUTHOR   "aik at ozlabs.ru"
>> >> @@ -147,6 +150,83 @@ static void tce_iommu_release(void *iommu_data)
>> >>  	kfree(container);
>> >>  }
>> >>  
>> >> +static long tce_iommu_eeh_ioctl(void *iommu_data,
>> >> +				unsigned int cmd, unsigned long arg)
>> >> +{
>> >> +	struct tce_container *container = iommu_data;
>> >> +	unsigned long minsz;
>> >> +	int ret = 0;
>> >> +
>> >> +#ifdef CONFIG_EEH
>> >> +	switch (cmd) {
>> >> +	case VFIO_EEH_PE_SET_OPTION: {
>> >> +		struct vfio_eeh_pe_set_option option;
>> >> +
>> >> +		minsz = offsetofend(struct vfio_eeh_pe_set_option, option);
>> >> +		if (copy_from_user(&option, (void __user *)arg, minsz))
>> >> +			return -EFAULT;
>> >> +		if (option.argsz < minsz)
>> >> +			return -EINVAL;
>> >> +
>> >> +		ret = eeh_pe_set_option(eeh_iommu_table_to_pe(container->tbl),
>> >> +					option.option);
>> >> +		break;
>> >> +	}
>> >> +	case VFIO_EEH_PE_GET_STATE: {
>> >> +		struct vfio_eeh_pe_get_state state;
>> >> +
>> >> +		minsz = offsetofend(struct vfio_eeh_pe_get_state, state);
>> >> +		if (copy_from_user(&state, (void __user *)arg, minsz))
>> >> +			return -EFAULT;
>> >> +		if (state.argsz < minsz)
>> >> +			return -EINVAL;
>> >> +
>> >> +		ret = eeh_pe_get_state(eeh_iommu_table_to_pe(container->tbl));
>> >> +		if (ret >= 0) {
>> >> +			state.state = ret;
>> >> +			if (copy_to_user((void __user *)arg, &state, minsz))
>> >> +				return -EFAULT;
>> >> +			ret = 0;
>> >> +		}
>> >
>> >This looks like one of those cases where you should just use the ioctl
>> >return value.
>> >
>> 
>> Ok. I'll use ioctl return value to carry output information. Note it might
>> have "0" as the output information.
>
>I think that's fine.
>
>

Ok. Thanks. I'll going to have "combined" ioctl command as you just suggested.
Also to use the return value from ioctl() for informtion carriage.

>> >> +		break;
>> >> +	}
>> >> +	case VFIO_EEH_PE_RESET: {
>> >> +		struct vfio_eeh_pe_reset reset;
>> >> +
>> >> +		minsz = offsetofend(struct vfio_eeh_pe_reset, option);
>> >> +		if (copy_from_user(&reset, (void __user *)arg, minsz))
>> >> +			return -EFAULT;
>> >> +		if (reset.argsz < minsz)
>> >> +			return -EINVAL;
>> >> +
>> >> +		ret = eeh_pe_reset(eeh_iommu_table_to_pe(container->tbl),
>> >> +				   reset.option);
>> >> +		break;
>> >> +	}
>> >> +	case VFIO_EEH_PE_CONFIGURE: {
>> >> +		struct vfio_eeh_pe_configure configure;
>> >> +
>> >> +		minsz = offsetofend(struct vfio_eeh_pe_configure, flags);
>> >> +		if (copy_from_user(&configure, (void __user *)arg, minsz))
>> >> +			return -EFAULT;
>> >> +		if (configure.argsz < minsz)
>> >> +			return -EINVAL;
>> >> +
>> >> +		ret = eeh_pe_configure(eeh_iommu_table_to_pe(container->tbl));
>> >> +		break;
>> >> +	}
>> >> +	default:
>> >> +		ret = -EINVAL;
>> >> +		pr_debug("%s: Cannot handle command %d\n",
>> >> +			__func__, cmd);
>> >> +	}
>> >> +#else
>> >> +	ret = -ENOENT;
>> >> +#endif
>> >
>> >Hmm, more like a BUG in the default case the way it's coded here (not
>> >even sure it's worth the default entry).  The #else case should probably
>> >be -ENOTTY like other unimplemented ioctls.
>> >
>> 
>> Yeah, we don't need default case here and I'll remove it in next revision.
>> Also, "-ENOTTY" will be used in future for unimplemented functions.
>> 
>> >> +
>> >> +	return ret;
>> >> +}
>> >> +
>> >>  static long tce_iommu_ioctl(void *iommu_data,
>> >>  				 unsigned int cmd, unsigned long arg)
>> >>  {
>> >> @@ -283,6 +363,11 @@ static long tce_iommu_ioctl(void *iommu_data,
>> >>  		tce_iommu_disable(container);
>> >>  		mutex_unlock(&container->lock);
>> >>  		return 0;
>> >> +	case VFIO_EEH_PE_SET_OPTION:
>> >> +	case VFIO_EEH_PE_GET_STATE:
>> >> +	case VFIO_EEH_PE_RESET:
>> >> +	case VFIO_EEH_PE_CONFIGURE:
>> >> +		return tce_iommu_eeh_ioctl(iommu_data, cmd, arg);
>> >
>> >This is where it would have really made sense to have a single
>> >VFIO_EEH_OP ioctl with a data structure passed to indicate the sub-op.
>> >AlexG, are you really attached to splitting these out into separate
>> >ioctls?
>> >
>> 
>> I really don't know. Alex.G want separate ioctl commands, but you
>> suggested to combine them. Could you guys please just tell me which
>> one (separate vs combined) I need to have in next revision? :-)
>> 
>> >>  	}
>> >>  
>> >>  	return -ENOTTY;
>> >> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>> >> index cb9023d..c5fac36 100644
>> >> --- a/include/uapi/linux/vfio.h
>> >> +++ b/include/uapi/linux/vfio.h
>> >> @@ -455,6 +455,72 @@ struct vfio_iommu_spapr_tce_info {
>> >>  
>> >>  #define VFIO_IOMMU_SPAPR_TCE_GET_INFO	_IO(VFIO_TYPE, VFIO_BASE + 12)
>> >>  
>> >> +/*
>> >> + * EEH functionality can be enabled or disabled on one specific device.
>> >> + * Also, the DMA or IO frozen state can be removed from the frozen PE
>> >> + * if required.
>> >> + */
>> >> +struct vfio_eeh_pe_set_option {
>> >> +	__u32 argsz;
>> >> +	__u32 flags;
>> >> +	__u32 option;
>> >> +#define VFIO_EEH_PE_SET_OPT_DISABLE	0	/* Disable EEH	*/
>> >> +#define VFIO_EEH_PE_SET_OPT_ENABLE	1	/* Enable EEH	*/
>> >> +#define VFIO_EEH_PE_SET_OPT_IO		2	/* Enable IO	*/
>> >> +#define VFIO_EEH_PE_SET_OPT_DMA		3	/* Enable DMA	*/
>> >
>> >This is more of a "command" than an "option" isn't it?  Each of these
>> >probably needs a more significant description.
>> >
>> 
>> Yeah, it would be regarded as "opcode" and I'll add more description about
>> them in next revision.
>> 
>> >> +};
>> >> +
>> >> +#define VFIO_EEH_PE_SET_OPTION		_IO(VFIO_TYPE, VFIO_BASE + 21)
>> >> +
>> >> +/*
>> >> + * Each EEH PE should have unique address to be identified. PE's
>> >> + * sharing mode is also useful information as well.
>> >> + */
>> >> +#define VFIO_EEH_PE_GET_ADDRESS		0	/* Get address	*/
>> >> +#define VFIO_EEH_PE_GET_MODE		1	/* Query mode	*/
>> >> +#define VFIO_EEH_PE_MODE_NONE		0	/* Not a PE	*/
>> >> +#define VFIO_EEH_PE_MODE_NOT_SHARED	1	/* Exclusive	*/
>> >> +#define VFIO_EEH_PE_MODE_SHARED		2	/* Shared mode	*/
>> >> +
>> >> +/*
>> >> + * EEH PE might have been frozen because of PCI errors. Also, it might
>> >> + * be experiencing reset for error revoery. The following command helps
>> >> + * to get the state.
>> >> + */
>> >> +struct vfio_eeh_pe_get_state {
>> >> +	__u32 argsz;
>> >> +	__u32 flags;
>> >> +	__u32 state;
>> >> +};
>> >
>> >Should state be a union to better describe the value returned?  What
>> >exactly is the address and why does the user need to know it?  Does this
>> >need user input or could we just return the address and mode regardless?
>> >
>> 
>> Ok. I think you want enum (not union) for state. I'll have macros for the
>> state in next revision as I did that for other cases.
>> 
>> Those macros defined for "address" just for ABI stuff as Alex.G mentioned.
>> There isn't corresponding ioctl command for host to get address any more
>> because QEMU (user) will have to figure it out by himself. The "address"
>> here means PE address and user has to figure it out according to PE
>> segmentation.
>> 
>> >> +
>> >> +#define VFIO_EEH_PE_GET_STATE		_IO(VFIO_TYPE, VFIO_BASE + 22)
>> >> +
>> >> +/*
>> >> + * Reset is the major step to recover problematic PE. The following
>> >> + * command helps on that.
>> >> + */
>> >> +struct vfio_eeh_pe_reset {
>> >> +	__u32 argsz;
>> >> +	__u32 flags;
>> >> +	__u32 option;
>> >> +#define VFIO_EEH_PE_RESET_DEACTIVATE	0	/* Deactivate reset	*/
>> >> +#define VFIO_EEH_PE_RESET_HOT		1	/* Hot reset		*/
>> >> +#define VFIO_EEH_PE_RESET_FUNDAMENTAL	3	/* Fundamental reset	*/
>> >
>> >How does a user know which of these to use?
>> >
>> 
>> I think Ben already helped explaining it for a lot in the subsequent
>> replies. Thanks to Ben :-)
>> 
>> >> +};
>> >> +
>> >> +#define VFIO_EEH_PE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 23)
>> >> +
>> >> +/*
>> >> + * One of the steps for recovery after PE reset is to configure the
>> >> + * PCI bridges affected by the PE reset.
>> >> + */
>> >> +struct vfio_eeh_pe_configure {
>> >> +	__u32 argsz;
>> >> +	__u32 flags;
>> >> +};
>> >
>> >Parameters are probably not necessary here.
>> >
>> 
>> Yep. I'll remove it in next revision. Thanks for your comments, Alex.
>> 
>> >> +
>> >> +#define VFIO_EEH_PE_CONFIGURE		_IO(VFIO_TYPE, VFIO_BASE + 24)
>> >> +
>> >>  /* ***************************************************************** */
>> >>  
>> >>  #endif /* _UAPIVFIO_H */
>> >
>> >How does a user learn that a device supports EEH?  Do they just start
>> >making ioctl calls and getting a failure?  Shouldn't we make use of one
>> >of the flag bits on the device or add a capability on the container for
>> >the user to query?
>> >
>> 
>> User needs to make some ioctl calls to make sure EEH can be supported on
>> one specific device:
>> 
>> 	struct vfio_eeh_pe_set_option set_option;
>> 
>> 	/* User have to make sure the device isn't a bridge and there
>> 	 * has one PE for it, which means that case of VFIO_EEH_PE_MODE_NONE.
>> 	 */
>> 
>> 	set_option.argsz = sizeof(set_option);
>> 	set_option.option = VFIO_EEH_PE_SET_OPT_ENABLE;
>> 	ret = ioctl(container, VFIO_EEH_PE_SET_OPTION, &set_option);
>> 	if (ret < 0) {
>> 		/* EEH can't supported */
>> 	}
>
>No, the user should be able to query whether it's available with
>VFIO_CHECK_EXTENSION.
>

Sounds like a good idea. If you agree, I'll have one more extention option
and use it in tce_iommu_ioctl():

#define VFIO_EEH_SUPPORT	5

>I think I'm also still looking for an explanation of how the user learns
>about the error that occurred, not just that it occurred, but what it
>was.  The description of the recovery process indicates a lot retrieval
>step, but there's no interface here for the user to get logs.  Is that a
>TBD?  Thanks,
>

The log stuff is TBD and I'll figure it out later.

About to what are the errors, there are a lot. Most of them are related
to hardware level, for example unstable PCI link. Usually, those error
bits defined in AER fatal error state register contribute to EEH errors.
It could be software related, e.g. violating IOMMU protection (read/write
permission etc), or even one PCI device isn't capable of DMAing. Hopefully,
it's the explaination you're looking for? :-)

Thanks,
Gavin



More information about the Linuxppc-dev mailing list