[PATCH v6 2/3] drivers/vfio: EEH support for VFIO PCI device

[Alexander Graf]

On 23.05.14 13:55, Gavin Shan wrote:
> On Fri, May 23, 2014 at 11:58:22AM +0200, Alexander Graf wrote:
>> On 23.05.14 09:37, Gavin Shan wrote:
>>> On Fri, May 23, 2014 at 08:55:15AM +0200, Alexander Graf wrote:
>>>>> Am 23.05.2014 um 06:37 schrieb Gavin Shan <gwshan at linux.vnet.ibm.com>:
>>>>>> On Thu, May 22, 2014 at 09:10:53PM -0600, Alex Williamson wrote:
>>>>>>> On Thu, 2014-05-22 at 18:23 +1000, Gavin Shan wrote:
>>>>>>> The patch adds new IOCTL commands for VFIO PCI device to support
>>>>>>> EEH functionality for PCI devices, which have been passed through
>>>>>> >from host to somebody else via VFIO.
>>> .../...
>>>
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * Reset is the major step to recover problematic PE. The following
>>>>>>> + * command helps on that.
>>>>>>> + */
>>>>>>> +struct vfio_eeh_pe_reset {
>>>>>>> +    __u32 argsz;
>>>>>>> +    __u32 option;
>>>>>>> +};
>>>>>>> +
>>>>>>> +#define VFIO_EEH_PE_RESET        _IO(VFIO_TYPE, VFIO_BASE + 24)
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * One of the steps for recovery after PE reset is to configure the
>>>>>>> + * PCI bridges affected by the PE reset.
>>>>>>> + */
>>>>>>> +#define VFIO_EEH_PE_CONFIGURE        _IO(VFIO_TYPE, VFIO_BASE + 25)
>>>>>> What can the user do differently by making these separate ioctls?
>>>>> hrm, I didn't understood as well. Alex.G could have the explaination.
>>>> Alex raised the same concern as me: why separate reset and configure? When we want to recover a device, we need a reset call anyway, right?
>>>>
>>> Ok. With current ioctl commands, "reset+configure" is required to do
>>> error recovery. Before the recovery, we also need call "configure"
>>> in order to retrieve error log correctly.
>> Well, the "configure" ioctl (which is a really bad name for what it
>> does btw) currently only restores the BARs which doesn't sound like
>> error log retrieval to me.
>>
> Could you please suggest a better name? I had VFIO_EEH_PE_CONFIGURE because
> it's for RTAS call "ibm,configure-pe".

VFIO_RESTORE_BARS maybe?

>>> Also, they corresponds to 2 separate RTAS services: "ibm,set-slot-reset"
>>> and "ibm,configure-pe".
>> Does a guest always issue both? What's the order it calls them in?
>>
> For one error, the following RTAS calls was called in general:
>
> < stop device drivers, no PCI traffic expected during recovery >
> ibm,set-eeh-option
> ibm,configure-pe
> < error log retrival >

I see. So the guest retrieves the log via BARs from the device? I guess 
I'm failing to see what "the log" is.


Alex

> ibm,set-slot-reset
> ibm,read-slot-reset-state2
> ibm,configure-pe
> < resume device drivers >
>
> We have other scenario. For example, PE reset failure and collect
> the permanent log. Prior to that, "ibm,configure-pe" should be called.
>
> Thanks,
> Gavin
>
>
>> Alex
>>