[PATCH net-next v2 7/9] ucc_geth: use the new fixed PHY helpers

[Florian Fainelli]

of_phy_connect_fixed_link() is becoming obsolete, and also required
platform code to register the fixed PHYs at the specified addresses for
those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
plus of_phy_register_fixed_link() helpers to transition over the new
scheme.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
No changes in v2

 drivers/net/ethernet/freescale/ucc_geth.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index c8299c31b21f..fab39e295441 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1728,9 +1728,6 @@ static int init_phy(struct net_device *dev)
 
 	phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
 				priv->phy_interface);
-	if (!phydev)
-		phydev = of_phy_connect_fixed_link(dev, &adjust_link,
-						   priv->phy_interface);
 	if (!phydev) {
 		dev_err(&dev->dev, "Could not attach to PHY\n");
 		return -ENODEV;
@@ -3790,6 +3787,17 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
 
 	ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (!ug_info->phy_node) {
+		/* In the case of a fixed PHY, the DT node associated
+		 * to the PHY is the Ethernet MAC DT node.
+		 */
+		if (of_phy_is_fixed_link(np)) {
+			err = of_phy_register_fixed_link(np);
+			if (err)
+				return err;
+		}
+		ug_info->phy_node = np;
+	}
 
 	/* Find the TBI PHY node.  If it's not there, we don't support SGMII */
 	ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
-- 
1.9.1