[PATCH] powerpc: irq work racing with timer interrupt can result in timer interrupt hang

[Paul E. McKenney]

On Sat, May 10, 2014 at 04:33:37PM +1000, Paul Mackerras wrote:
> On Fri, May 09, 2014 at 03:08:45PM -0700, Paul E. McKenney wrote:
> > On Fri, May 09, 2014 at 11:50:05PM +0200, Gabriel Paubert wrote:
> > > On Fri, May 09, 2014 at 06:41:13AM -0700, Paul E. McKenney wrote:
> > > > On Fri, May 09, 2014 at 05:47:12PM +1000, Anton Blanchard wrote:
> > > > > I am seeing an issue where a CPU running perf eventually hangs.
> > > > > Traces show timer interrupts happening every 4 seconds even
> > > > > when a userspace task is running on the CPU.
> > > > 
> > > > Is this by chance every 4.2 seconds?  The reason I ask is that
> > > > Paul Clarke and I are seeing an interrupt every 4.2 seconds when
> > > > he runs NO_HZ_FULL, and are trying to get rid of it.  ;-)
> > > 
> > > Hmmm, it's close to 2^32 nanoseconds, isnt't it suspiscious?
> > 
> > Now that you mention it...  ;-)
> > 
> > So you are telling me that we are not succeeding in completely turning
> > off the decrementer interrupt?
> 
> There is no way to turn off the decrementer interrupt without turning
> off external (device) interrupts.
> 
> On IBM Power CPUs since POWER6, the decrementer runs at 512MHz.  If
> you set the decrementer to 0x7fffffff it will interrupt in 4.194
> seconds, so that would be what you're seeing.  The only way to avoid
> the interrupt becoming pending is to keep on setting it to a large
> value before it gets to -1.
> 
> If an interrupt every 4.2 seconds is a problem in some applications,
> then we need to talk to the Power architects.

Thank you for filling me in on this!  Might be worth doing just that.

							Thanx, Paul