powerpc/mpc85xx: Add BSC9132 QDS Support

[Harninder Rai]

> > +	};
> > +
> > +	nand at 1,0 {
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		compatible = "fsl,ifc-nand";
> > +		reg = <0x1 0x0 0x4000>;
> > +
> > +		partition at 0 {
> > +			/* This location must not be altered  */
> > +			/* 3MB for u-boot Bootloader Image */
> > +			reg = <0x0 0x00300000>;
> > +			label = "NAND U-Boot Image";
> > +			read-only;
> > +		};
> > +
> > +		partition at 300000 {
> > +			/* 1MB for DTB Image */
> > +			reg = <0x00300000 0x00100000>;
> > +			label = "NAND DTB Image";
> > +		};
> > +
> > +		partition at 400000 {
> > +			/* 8MB for Linux Kernel Image */
> > +			reg = <0x00400000 0x00800000>;
> > +			label = "NAND Linux Kernel Image";
> > +		};
> > +
> > +		partition at c00000 {
> > +			/* Rest space for Root file System Image */
> > +			reg = <0x00c00000 0x07400000>;
> > +			label = "NAND RFS Image";
> > +		};
> > +	};
> > +};
> 
> Please keep partition definitions out of the dts file, as has been recently
> requested of other boards.  You can use U-Boot to create the partition nodes
> based on the mtdparts variable, or you can use the Linux mtdparts command line
> option.
Ok. Will remove these in V2 of patch
> 
> -Scott