[PATCH] ASoC: fsl_sai: Add isr to deal with error flag

Li.Xiubo at freescale.com Li.Xiubo at freescale.com
Thu Mar 27 15:06:53 EST 2014


> > > > > > > +	if (xcsr & FSL_SAI_CSR_FWF)
> > > > > > > +		dev_dbg(dev, "isr: Enabled transmit FIFO is empty\n");
> > > > > > > +
> > > > > > > +	if (xcsr & FSL_SAI_CSR_FRF)
> > > > > > > +		dev_dbg(dev, "isr: Transmit FIFO watermark has been
> > > reached\n");
> > > > > > > +
> > > > > >
> > > > > > While are these ones really needed to clear manually ?
> > > > >
> > > > > The reference manual doesn't mention about the requirement. So SAI
> should
> > > do
> > > > > the self-clearance.
> > > >
> > > > Yes, I do think we should let it do the self-clearance, and shouldn't
> > > interfere
> > > > of them...
> > >
> > > SAI is supposed to ignore the interference, isn't it?
> > >
> >
> > Maybe, but I'm not very sure.
> > And these bits are all writable and readable.
> 
> Double-confirmed? Because FWF and FRF should be read-only bits.
> 

So let's just ignore the clearance of these bits in isr().

+++++
SAI Transmit Control Register (I2S1_TCSR) : 32 : R/W : 0000_0000h
-----

I have checked in the Vybrid and LS1 SoC datasheets, and they are all the
Same as above, and nothing else.

Have I missed ?



More information about the Linuxppc-dev mailing list