[PATCH v3 0/3] Support of the kmcoge4 board

[Valentin Longchamp]

This series adds support for Keymile's COGE4 board, called kmcoge4. This
board is the reference design for further designs at Keymile around the
P2040/P2041 SoCs from Freescale. This reference design is internally
called kmp204x.

Changes in v3:
- add a patch with the bindings for the KEYMILE FPGAs
- add the compatible strings for the localbus nodes
- remove the IRQ part of the board-control node as it is currently being
  reworked

Changes in v2:
- add a patch so that the Zarlink vendor prefix is defined
- add some nodes on the localbus CS when possible
- only use the corenet_generic machine and add kmcoge4 to the supported
  boards instead of defining a new kmp204x machine
- set better and more precise device nodes for the spi devices
- remove the partion layout for the spi_flash at 0

Valentin Longchamp (3):
  devicetree: bindings: add Zarlink to the vendor prefixes
  devcietree: bindings: add some MFD Keymile FPGAs
  powerpc/mpc85xx: add support for Keymile's kmcoge4 board

 Documentation/devicetree/bindings/mfd/bfticu.txt   |  26 +++
 Documentation/devicetree/bindings/mfd/qriox.txt    |  17 ++
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 arch/powerpc/boot/dts/kmcoge4.dts                  | 157 ++++++++++++++
 arch/powerpc/configs/85xx/kmp204x_defconfig        | 227 +++++++++++++++++++++
 arch/powerpc/platforms/85xx/Kconfig                |   2 +-
 arch/powerpc/platforms/85xx/corenet_generic.c      |   3 +-
 7 files changed, 432 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/bfticu.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/qriox.txt
 create mode 100644 arch/powerpc/boot/dts/kmcoge4.dts
 create mode 100644 arch/powerpc/configs/85xx/kmp204x_defconfig

-- 
1.8.0.1