[PATCH 9/9] powerpc/pm: support deep sleep feature on T1040

Scott Wood scottwood at freescale.com
Fri Mar 21 09:07:59 EST 2014


On Thu, 2014-03-20 at 11:59 +0000, David Laight wrote:
> I tried to work out what the 'twi, isync' instructions were for (in in_le32()).
> The best I could come up with was to ensure a synchronous bus-fault.
> But bus faults are probably only expected during device probing - not
> normal operation, and the instructions will have a significant cost.
> 
> Additionally in_le32() and out_le32() both start with a 'sync' instruction.
> In many cases that isn't needed either - an explicit iosync() can be
> used after groups of instructions.

The idea is that it's better to be maximally safe by default, and let
performance critical sections be optimized using raw accessors and
explicit synchronization if needed, than to have hard-to-debug bugs due
to missing/wrong sync.  A lot of I/O is slow enough that the performance
impact doesn't really matter, but the brain-time cost of getting the 
sync right is still there.

-Scott




More information about the Linuxppc-dev mailing list