[PATCH 7/9] fsl: add EPU FSM configuration for deep sleep

[Scott Wood]

On Wed, 2014-03-12 at 16:34 +0800, Chenhui Zhao wrote:
> On Tue, Mar 11, 2014 at 07:08:43PM -0500, Scott Wood wrote:
> > On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote:
> > > From: Hongbo Zhang <hongbo.zhang at freescale.com>
> > > 
> > > In the last stage of deep sleep, software will trigger a Finite
> > > State Machine (FSM) to control the hardware precedure, such as
> > > board isolation, killing PLLs, removing power, and so on.
> > > 
> > > When the system is waked up by an interrupt, the FSM controls the
> > > hardware to complete the early resume precedure.
> > > 
> > > This patch configure the EPU FSM preparing for deep sleep.
> > > 
> > > Signed-off-by: Hongbo Zhang <hongbo.zhang at freescale.com>
> > > Signed-off-by: Chenhui Zhao <chenhui.zhao at freescale.com>
> > 
> > Couldn't this be part of qoriq_pm.c?
> 
> Put the code in drivers/platform/fsl/ so that LS1 can share these code.

How can LS1 share it if it's got hardcoded T1040 values?

> > > diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> > > index 09fde58..6539e6d 100644
> > > --- a/drivers/platform/Kconfig
> > > +++ b/drivers/platform/Kconfig
> > > @@ -6,3 +6,7 @@ source "drivers/platform/goldfish/Kconfig"
> > >  endif
> > >  
> > >  source "drivers/platform/chrome/Kconfig"
> > > +
> > > +if FSL_SOC
> > > +source "drivers/platform/fsl/Kconfig"
> > > +endif
> > 
> > Chrome doesn't need an ifdef -- why does this?
> 
> Don't wish other platform see these options, and the X86 and GOLDFISH have
> ifdefs.

The point is you can implement the dependency inside
drivers/platform/fsl/Kconfig.

> > > diff --git a/drivers/platform/fsl/Makefile b/drivers/platform/fsl/Makefile
> > > new file mode 100644
> > > index 0000000..d99ca0e
> > > --- /dev/null
> > > +++ b/drivers/platform/fsl/Makefile
> > > @@ -0,0 +1,5 @@
> > > +#
> > > +# Makefile for linux/drivers/platform/fsl
> > > +# Freescale Specific Power Management Drivers
> > > +#
> > > +obj-$(CONFIG_FSL_SLEEP_FSM)	+= sleep_fsm.o
> > 
> > Why is this here while the other stuff is in arch/powerpc/sysdev?
> > 
> > > +/* Block offsets */
> > > +#define	RCPM_BLOCK_OFFSET	0x00022000
> > > +#define	EPU_BLOCK_OFFSET	0x00000000
> > > +#define	NPC_BLOCK_OFFSET	0x00001000
> > 
> > Why don't these block offsets come from the device tree?
> 
> Have maped DCSR registers. Don't wish to remap them.

We don't wish to have hardcoded CCSR/DCSR offsets in the kernel source.
Sorry.
 
> > > +	/* Configure the EPU Counters */
> > > +	epu_write(EPCCR15, 0x92840000);
> > > +	epu_write(EPCCR14, 0x92840000);
> > > +	epu_write(EPCCR12, 0x92840000);
> > > +	epu_write(EPCCR11, 0x92840000);
> > > +	epu_write(EPCCR10, 0x92840000);
> > > +	epu_write(EPCCR9, 0x92840000);
> > > +	epu_write(EPCCR8, 0x92840000);
> > > +	epu_write(EPCCR5, 0x92840000);
> > > +	epu_write(EPCCR4, 0x92840000);
> > > +	epu_write(EPCCR2, 0x92840000);
> > > +
> > > +	/* Configure the SCUs Inputs */
> > > +	epu_write(EPSMCR15, 0x76000000);
> > > +	epu_write(EPSMCR14, 0x00000031);
> > > +	epu_write(EPSMCR13, 0x00003100);
> > > +	epu_write(EPSMCR12, 0x7F000000);
> > > +	epu_write(EPSMCR11, 0x31740000);
> > > +	epu_write(EPSMCR10, 0x65000030);
> > > +	epu_write(EPSMCR9, 0x00003000);
> > > +	epu_write(EPSMCR8, 0x64300000);
> > > +	epu_write(EPSMCR7, 0x30000000);
> > > +	epu_write(EPSMCR6, 0x7C000000);
> > > +	epu_write(EPSMCR5, 0x00002E00);
> > > +	epu_write(EPSMCR4, 0x002F0000);
> > > +	epu_write(EPSMCR3, 0x2F000000);
> > > +	epu_write(EPSMCR2, 0x6C700000);
> > 
> > Where do these magic numbers come from?  Which chips are they valid for?
> 
> They are for T1040. Can be found in the RCPM chapter of T1040RM.

Then put in a comment to that effect, including what part of the RCPM
chapter.

How do you plan to handle the addition of another SoC with different
values?

-Scott