[PATCH] T1040RDB: add qe node for T1040RDB dts

[Scott Wood]

On Wed, 2014-03-12 at 16:26 +0800, Zhao Qiang wrote:
> Signed-off-by: Zhao Qiang <B45475 at freescale.com>
> ---
>  arch/powerpc/boot/dts/t1040rdb.dts | 43 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)

Presumably this is on top of this patch:
http://patchwork.ozlabs.org/patch/314138/

...since there's no existing t1040 device tree support.  Always mention
when your patch is on top of a patch that hasn't yet been merged and
isn't in the same patch set.

At least some of this stuff seems like it should be in t1040si-post.dts
(or a file included by it), rather than the board dts.

> +		tdma: ucc at 2000 {
> +			compatible = "fsl,ucc-tdm";
> +			rx-clock-name = "clk3";
> +			tx-clock-name = "clk4";
> +			fsl,rx-sync-clock = "rsync_pin";
> +			fsl,tx-sync-clock = "tsync_pin";
> +			fsl,tx-timeslot = <0xfffffffe>;
> +			fsl,rx-timeslot = <0xfffffffe>;
> +			fsl,tdm-framer-type = "e1";
> +			fsl,tdm-mode = "normal";
> +			fsl,tdm-id = <0>;
> +			fsl,siram-entry-id = <0>;
> +		};
> +
> +		serial: ucc at 2200 {
> +			device_type = "serial";
> +			compatible = "ucc_uart";
> +			port-number = <1>;
> +			rx-clock-name = "brg2";
> +			tx-clock-name = "brg2";
> +		};

Missing reg.

-Scott