[RFC PATCH V3 06/17] ppc/pnv: allocate pe->iommu_table dynamically
Alexey Kardashevskiy
aik at ozlabs.ru
Tue Jun 24 20:06:32 EST 2014
On 06/10/2014 11:56 AM, Wei Yang wrote:
> Current iommu_table of a PE is a static field. This will have a problem when
> iommu_free_table is called.
What kind of problem? This table is per PE and PE is not going anywhere.
>
> This patch allocate iommu_table dynamically.
>
> Signed-off-by: Wei Yang <weiyang at linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/iommu.h | 3 +++
> arch/powerpc/platforms/powernv/pci-ioda.c | 24 +++++++++++++-----------
> arch/powerpc/platforms/powernv/pci.h | 2 +-
> 3 files changed, 17 insertions(+), 12 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
> index 42632c7..0fedacb 100644
> --- a/arch/powerpc/include/asm/iommu.h
> +++ b/arch/powerpc/include/asm/iommu.h
> @@ -78,6 +78,9 @@ struct iommu_table {
> struct iommu_group *it_group;
> #endif
> void (*set_bypass)(struct iommu_table *tbl, bool enable);
> +#ifdef CONFIG_PPC_POWERNV
> + void *data;
> +#endif
> };
>
> /* Pure 2^n version of get_order */
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 9715351..8ca3926 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -608,6 +608,10 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
> return;
> }
>
> + pe->tce32_table = kzalloc_node(sizeof(struct iommu_table),
> + GFP_KERNEL, hose->node);
> + pe->tce32_table->data = pe;
> +
> /* Associate it with all child devices */
> pnv_ioda_setup_same_PE(bus, pe);
>
> @@ -675,7 +679,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
>
> pe = &phb->ioda.pe_array[pdn->pe_number];
> WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
> - set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
> + set_iommu_table_base_and_group(&pdev->dev, pe->tce32_table);
> }
>
> static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
> @@ -702,7 +706,7 @@ static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
> } else {
> dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
> set_dma_ops(&pdev->dev, &dma_iommu_ops);
> - set_iommu_table_base(&pdev->dev, &pe->tce32_table);
> + set_iommu_table_base(&pdev->dev, pe->tce32_table);
> }
> return 0;
> }
> @@ -712,7 +716,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
> struct pci_dev *dev;
>
> list_for_each_entry(dev, &bus->devices, bus_list) {
> - set_iommu_table_base_and_group(&dev->dev, &pe->tce32_table);
> + set_iommu_table_base_and_group(&dev->dev, pe->tce32_table);
> if (dev->subordinate)
> pnv_ioda_setup_bus_dma(pe, dev->subordinate);
> }
> @@ -798,8 +802,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
> void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
> __be64 *startp, __be64 *endp, bool rm)
> {
> - struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
> - tce32_table);
> + struct pnv_ioda_pe *pe = tbl->data;
> struct pnv_phb *phb = pe->phb;
>
> if (phb->type == PNV_PHB_IODA1)
> @@ -862,7 +865,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> }
>
> /* Setup linux iommu table */
> - tbl = &pe->tce32_table;
> + tbl = pe->tce32_table;
> pnv_pci_setup_iommu_table(tbl, addr, PNV_TCE32_TAB_SIZE * segs,
> base << PNV_TCE32_SEG_SHIFT);
>
> @@ -900,8 +903,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
>
> static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable)
> {
> - struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
> - tce32_table);
> + struct pnv_ioda_pe *pe = tbl->data;
> uint16_t window_id = (pe->pe_number << 1 ) + 1;
> int64_t rc;
>
> @@ -942,10 +944,10 @@ static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb,
> pe->tce_bypass_base = 1ull << 59;
>
> /* Install set_bypass callback for VFIO */
> - pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass;
> + pe->tce32_table->set_bypass = pnv_pci_ioda2_set_bypass;
>
> /* Enable bypass by default */
> - pnv_pci_ioda2_set_bypass(&pe->tce32_table, true);
> + pnv_pci_ioda2_set_bypass(pe->tce32_table, true);
> }
>
> static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> @@ -993,7 +995,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> }
>
> /* Setup linux iommu table */
> - tbl = &pe->tce32_table;
> + tbl = pe->tce32_table;
> pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0);
>
> /* OPAL variant of PHB3 invalidated TCEs */
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 90f6da4..9fbf7c0 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -60,7 +60,7 @@ struct pnv_ioda_pe {
> /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
> int tce32_seg;
> int tce32_segcount;
> - struct iommu_table tce32_table;
> + struct iommu_table *tce32_table;
> phys_addr_t tce_inval_reg_phys;
>
> /* 64-bit TCE bypass region */
>
--
Alexey
More information about the Linuxppc-dev
mailing list